52927-40-9

Upstream product

• 459-57-4 4-fluorobenzaldehyde 
• 108-59-8 malonic acid dimethyl ester 

Downstream Products

• 511284-18-7 dimethyl-4-(4-fluorophenyl)-1-methyl-2,6-dioxo-3,5-piperidinedicarboxylate 
• 904294-15-1 2‐(4-fluorophenyl)cyclopropane-1,1-dicarboxylic acid dimethyl ester 
• 252938-22-0 methyl 3-(4-fluorophenyl)-2-methoxycarbonylpropionate 
• 188302-27-4 (3S,4R)-4-(4-fluorophenyl)-1-methyl-2,6-dioxopiperidine-3-carboxylic acid methyl ester 
• 1099628-85-9 meso-(3R,4s,5S)-bis(3-hydroxypropyl) 4-(4-fluorophenyl)-1-methyl-2,6-dioxopiperidine-3,5-dicarboxylate 
• 1099628-83-7 meso-(3R,4s,5S)-bis(2-hydroxyethyl) 4-(4-fluorophenyl)-1-methyl-2,6-dioxopiperidine-3,5-dicarboxylate 

Relevant academic research and scientific papers

Discovery of Novel Pyrazolo-pyridone DCN1 Inhibitors Controlling Cullin Neddylation

Chemical control of cullin neddylation is attracting increased attention based largely on the successes of the NEDD8-activating enzyme (E1) inhibitor pevonedistat. Recently reported chemical probes enable selective and time-dependent inhibition of downstream members of the neddylation trienzymatic cascade including the co-E3, DCN1. In this work, we report the optimization of a novel class of small molecule inhibitors of the DCN1-UBE2M interaction. Rational X-ray co-structure enabled optimization afforded a 25-fold improvement in potency relative to the initial screening hit. The potency gains are largely attributed to additional hydrophobic interactions mimicking the N-terminal acetyl group that drives binding of UBE2M to DCN1. The compounds inhibit the protein-protein interaction, block NEDD8 transfer in biochemical assays, engage DCN1 in cells, and selectively reduce the steady-state neddylation of Cul1 and Cul3 in two squamous carcinoma cell lines harboring DCN1 amplification.

A novel sublimable organic salt: Synthesis, characterization, thermal behavior, and catalytic activity for the synthesis of arylidene, heteroarylidene, and alkylidene malonates

A novel sublimable organic salt was synthesized, and its chemical structure was characterized by FTIR, 1D NMR, 2D NMR, and elemental analysis. In addition, the thermal phase transitions and thermal stability of new organic salt were investigated. The DSC and TGA results showed that the organic salt could convert into constituent molecules at dec. ~ 200?°C) under atmospheric pressure without forming the liquid phase. Then, it was recondensed to regenerate the initial organic salt in the cool part of the vial. Therefore, it can be a promising organic salt towards the regeneration of spent catalyst from synthesis processes when the reaction mixture contains poorly volatile components and includes its use in gas-phase procedures. Also, the catalytic efficiency of new organic salt was investigated in the Knoevenagel condensation reaction. A variety of substituted arylidene and alkylidene malonates were isolated in 78–95% yield within six hours.? Under the optimized reaction conditions, the current catalytic procedure exhibited superiority compared to the mixed piperazine/acetic acid, piperidine/acetic acid, and piperidinium acetate. There were no significant changes in the new organic salt chemical structure and catalytic activity even after the 5th run. This work revealed the importance of the existence of simultaneous hydrogen bond acceptor/donor groups in our environmentally friendly catalyst to promote the Knoevenagel condensation reaction without the use of metal-containing catalysts.

Solid-phase synthesis of arylidene and alkylidene malonates, as versatile intermediates, catalyzed using mesoporous poly-melamine–formaldehyde as a nitrogen-rich porous organic polymer (POP)

An efficient solid/slurry-state synthesis of arylidene and alkylidene malonates as versatile intermediates is developed in the presence of mesoporous poly-melamine–formaldehyde. The condensation reaction was conducted through a ball milling process as a non-conventional procedure and a greener methodology at room temperature under solvent-free conditions. The mesoporous heterogeneous catalyst could be recovered and reused ten times, and the results showed a negligible loss of catalytic activity. Various aryl- and heteroarylidene malonates, as well as dimethyl (cyclohexylidene)malonate, were isolated in good to high yields under optimal conditions. The use of hazardous reagents and solvents were minimized in the current method, and separation of catalyst and products, as well as the recovery and reusing of catalyst, were performed by cost-effective procedures. This work revealed that the synergistic effect of numerous Lewis base sites together with acceptor-donner hydrogen bonding functional groups in porous organic polymer (POP), and its high porosity plays a vital role to promote the carbon–carbon coupling reaction in the solid phase synthesis.

Ball-Milling-Enabled Reactivity of Manganese Metal**

Efforts to generate organomanganese reagents under ball-milling conditions have led to the serendipitous discovery that manganese metal can mediate the reductive dimerization of arylidene malonates. The newly uncovered process has been optimized and its mechanism explored using CV measurements, radical trapping experiments, EPR spectroscopy, and solution control reactions. This unique reactivity can also be translated to solution whereupon pre-milling of the manganese is required.

Reductive Knoevenagel Condensation with the Zn-AcOH System

An efficient gram-scale one-pot approach to 2-substituted malonates and related structures is developed, starting from commercially available aldehydes and active methylene compounds. The technique combines Knoevenagel condensation with the reduction of the C=C bond in the resulting activated alkenes with the Zn-AcOH system. The relative ease with which the C=C bond reduction occurs can be traced to the accepting abilities of the substituents in the intermediate arylidene malonates.

Synthesis of Substituted β-Styrylmalonates by Sequential Isomerization of 2-Arylcyclopropane-1,1-dicarboxylates and (2-Arylethylidene)malonates

A method has been developed for the synthesis of substituted β-styrylmalonates by conversion of 2-arylcyclopropane-1,1-dicarboxylates (ACDCs) in the presence of gallium trichloride into the corresponding- 1,2-zwitterionic intermediates or (2-arylethyl-idene)malonates, followed by treatment with pyridine at room temperature leading to an isomerization of the emerging double bond. This method allows one to expand these reactions to include ACDCs with acceptor substituents at the aromatic ring.

Co-Polymeric Nanosponges from Cellulose Biomass as Heterogeneous Catalysts for amine-catalyzed Organic Reactions

Heterogeneous catalysts prepared from biomass waste sources are attracting increasing interest. The reasons rely on the possibility of combining the virtuous approach of circular economy with the consolidated advantages of heterogeneous catalysis, namely the recycling of the system and the possibility to drive selectivity towards desired products. Herein we report a highly porous cellulose-based nanosponge (CNS) and its use as a recoverable catalyst for Henry and Knoevenagel reactions, two classical amino-catalyzed transformations. The material is obtained by cross-linking between TEMPO-oxidized cellulose nanofibers (TOCNF) and branched polyethyleneimine 25 kDa (bPEI) in the presence of citric acid. CNS have been developed as sorbent materials for water remediation but their use as heterogeneous catalysts was never investigated. The fully characterized micro- and nano-porous system guarantees a complete penetration of CNS, allowing reagents to diffuse within. Indeed, by modulating reaction conditions (catalyst loading, temperature, solvent, microwave versus conventional heating, relative ratio of reagents) it was possible to drive selectivity towards the desired products, while maintaining high efficiency in terms of conversion. The catalyst could be re-used several times without losing in catalytic efficiency. In most cases the products’ distribution is quite different from homogeneous conditions, this much more emphasizing the importance of this heterogeneous solution.

PHARMACEUTICALLY ACTIVE PYRAZOLO-PYRIDONE MODULATORS OF DCN1/2-MEDIATED CULLIN NEDDYLATION

A DCN1/2-mediated cullin neddylation modulator; a method for treating disorders associated with dysfunctional DCN1 and/or UBC12, Alzheimer's disease, other neurodegenerative diseases, bacterial infections, or viral infections; and a method for treating cancers are provided. The DCN1/2-mediated cullin neddylation modulator includes a compound according to Formula I disclosed herein. The methods include administering to a mammal a therapeutically effective amount of a compound according to Formula I. Also provided herein is a pharmaceutical composition including a therapeutically effective amount of a compound according to Formula I, or a pharmaceutically acceptable salt thereof, and a pharmaceutically acceptable carrier.

Stereospecific copper(II)-catalyzed tandem ring opening/oxidative alkylation of donor-acceptor cyclopropanes with hydrazones: Synthesis of tetrahydropyridazines

Aerobic copper(II)-catalyzed tandem ring opening and oxidative C-H alkylation of donor-acceptor cyclopropanes with bisaryl hydrazones is accomplished to produce tetrahydropyridazines, in which copper(II) plays dual role as a Lewis acid as well as redox catalyst. The reaction is stereospecific, and optically active cyclopropanes can be reacted with high optical purities (89-98% enantiomeric excess). The substrate scope, functional group tolerance, dual role of the copper(II) catalyst, and the use of air as an oxidant are the important practical features. A product bearing a 3-bromoaryl group can be subjected to Pd-catalyzed Suzuki coupling with boronic acid in high yield.

An Expeditious Route to trans-Configured Tetrahydrothiophenes Enabled by Fe(OTf)3-Catalyzed [3+2] Cycloaddition of Donor–Acceptor Cyclopropanes with Thionoesters

A synthetic route to trans-configured tetrahydrothiophenes (THTs) through Fe(OTf)3-promoted [3+2] cycloaddition of donor–acceptor cyclopropanes with thionoesters was developed. The cycloaddition proceeded in high yield with high diastereoselectivity, affording transient α-alkoxy THTs. Not only aromatic and aliphatic thionoesters, but also thionolactone were applicable to the present iron catalysis. Further transformation of the S,O-ketal functionality of the product was achieved in a highly trans diastereoselective manner. Moreover, the utility of our methodology was clearly demonstrated by the synthesis of enantioenriched trans-configured THTs.