57706-88-4Relevant academic research and scientific papers
Efficient preparation and application of monodisperse palladium loaded graphene oxide as a reusable and effective heterogeneous catalyst for suzuki cross-coupling reaction
Diler, Fatma,Burhan, Hakan,Genc, Hayriye,Kuyuldar, Esra,Zengin, Mustafa,Cellat, Kemal,Sen, Fatih
, (2019/11/29)
A homogeneously dispersed graphene oxide supported palladium nanomaterial (Pd?GO) has been successfully synthesized and used as a catalyst in cross-coupling reactions at room temperature. Various analytical techniques such as X-ray Diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HR-TEM) were used to characterize the monodisperse Pd?GO. Monodisperse Pd?GO nanomaterials were used for the cross-coupling reactions which brought together organic molecules with functional significance. This catalyst showed superior catalytic activity and stability for these coupling reactions. High product yields, short reaction times and mild reaction conditions, obtained by the using of developed catalysts. Importantly, the catalyst can be used at least five experiments successfully without losing its efficiency.
Ruthenium nanoparticle-intercalated montmorillonite clay for solvent-free alkene hydrogenation reaction
Upadhyay, Praveenkumar,Srivastava, Vivek
, p. 740 - 745 (2015/02/05)
Well-characterized, ruthenium nanoparticle-intercalated montmorillonite clay was used as a catalyst in solvent-free alkene hydrogenation reactions and the corresponding products were obtained in good yields. The catalytic activity of ruthenium nanoparticle-intercalated montmorillonite clay was successfully tested with 16 different functionalized and non-functionalized alkenes. Apart from alkene reduction, the ruthenium nanoparticle-intercalated montmorillonite clay was also tested in Wittig-type reactions for obtaining dehydrobrittonin A, an important intermediate for the synthesis of brittonin A. Ruthenium nanoparticle-intercalated montmorillonite clay was found to be active in the synthesis of dehydrobrittonin A and brittonin A. The ability to recycle the catalyst nine times, together with low catalyst loading, high catalytic activity and catalytic selectivity were noteworthy advantages of the proposed protocol.
Bis(phosphine)cobalt dialkyl complexes for directed catalytic alkene hydrogenation
Friedfeld, Max R.,Margulieux, Grant W.,Schaefer, Brian A.,Chirik, Paul J.
supporting information, p. 13178 - 13181 (2015/03/30)
Planar, low-spin cobalt(II) dialkyl complexes bearing bidentate phosphine ligands, (P - P)Co-(CH2SiMe3)2, are active for the hydrogenation of geminal and 1,2-disubstituted alkenes. Hydrogenation of more hindered internal and endocyclic trisubstituted alkenes was achieved through hydroxyl group activation, an approach that also enables directed hydrogenations to yield contrasteric isomers of cyclic alkanes.
Regioselective oxidation of nonactivated alkyl C-H groups using highly structured non-heme iron catalysts
Gómez, Laura,Canta, Merceì,Font, David,Prat, Irene,Ribas, Xavi,Costas, Miquel
, p. 1421 - 1433 (2013/03/29)
Selective oxidation of alkyl C-H groups constitutes one of the highest challenges in organic synthesis. In this work, we show that mononuclear iron coordination complexes Λ-[Fe(CF3SO3) 2((S,S,R)-MCPP)] (Λ-1P), Δ-[Fe(CF3SO 3)2((R,R,R)-MCPP)] (Δ-1P), Λ-[Fe(CF 3SO3)2((S,S,R)-BPBPP)] (Λ-2P), and Δ-[Fe(CF3SO3)2((R,R,R)-BPBPP)] (Δ-2P) catalyze the fast, efficient, and selective oxidation of nonactivated alkyl C-H groups employing H2O2 as terminal oxidant. These complexes are based on tetradentate N-based ligands and contain iron centers embedded in highly structured coordination sites defined by two bulky 4,5-pinenopyridine donor ligands, a chiral diamine ligand backbone, and chirality at the metal (Λ or Δ). X-ray diffraction analysis shows that in Λ-1P and Λ-2P the pinene rings create cavity-like structures that isolate the iron site. The efficiency and regioselectivity in catalytic C-H oxidation reactions of these structurally rich complexes has been compared with those of Λ-[Fe(CF3SO3) 2((S,S)-MCP)] (Λ-1), Λ-[Fe(CF3SO 3)2((S,S)-BPBP)] (Λ-2), Δ-[Fe(CF 3SO3)2((R,R)-BPBP)] (Δ-2), Λ-[Fe(CH3CN)2((S,S)-BPBP)](SbF6) 2 (Λ-2SbF6), and Δ-[Fe(CH3CN) 2((R,R)-BPBP)](SbF6)2 (Δ-2SbF 6), which lack the steric bulk introduced by the pinene rings. Cavity-containing complexes Λ-1P and Λ-2P exhibit enhanced activity in comparison with Δ-1P, Δ-2P, Λ-1, Λ-2, and Λ-2SbF6. The regioselectivity exhibited by catalysts Λ-1P, Λ-2P, Δ-1P, and Δ-2P in the C-H oxidation of simple organic molecules can be predicted on the basis of the innate properties of the distinct C-H groups of the substrate. However, in specific complex organic molecules where oxidation of multiple C-H sites is competitive, the highly elaborate structure of the catalysts allows modulation of C-H regioselectivity between the oxidation of tertiary and secondary C-H groups and also among multiple methylene sites, providing oxidation products in synthetically valuable yields. These selectivities complement those accomplished with structurally simpler oxidants, including non-heme iron catalysts Λ-2 and Λ-2SbF6.
An iron catalyst for oxidation of alkyl C-H bonds showing enhanced selectivity for methylenic sites
Prat, Irene,Gomez, Laura,Canta, Merce,Ribas, Xavi,Costas, Miquel
supporting information, p. 1908 - 1913 (2013/03/14)
Many are called but few are chosen: A nonheme iron complex catalyzes the oxidation of alkyl C-H bonds by using H2O2 as the oxidant, showing an enhanced selectivity for secondary over tertiary C-H bonds (see scheme). Copyright
An iron(III)-monoamidate complex catalyst for selective hydroxylation of alkane C-H bonds with hydrogen peroxide
Hitomi, Yutaka,Arakawa, Kengo,Funabiki, Takuzo,Kodera, Masahito
supporting information; experimental part, p. 3448 - 3452 (2012/06/16)
Selective oxidation: The success of the title reaction (see scheme) is caused by the strong electron donation from the amidate moiety of the dpaq ligand to the iron center (dpaq=2-[bis(pyridin-2-ylmethyl)]amino-N-quinolin-8- yl-acetamidate). This process facilitates the O-O bond heterolysis of the intermediate FeIIIOOH species to generate a selective oxidant without forming highly reactive hydroxyl radicals. Copyright
Highly efficient, regioselective, and stereospecific oxidation of aliphatic C-H groups with H2O2, catalyzed by aminopyridine manganese complexes
Ottenbacher, Roman V.,Samsonenko, Denis G.,Talsi, Evgenii P.,Bryliakov, Konstantin P.
supporting information, p. 4310 - 4313 (2012/11/06)
Aminopyridine manganese complexes [LMnII(OTf)2] having a similar coordination topology catalyze the oxidation of unactivated aliphatic C-H groups with H2O2, demonstrating excellent efficiency (up to TON = 970), site selectivity, and stereospecificity (up to >99%).
Iron(III) chloride-catalysed aerobic reduction of olefins using aqueous hydrazine at ambient temperature
Lamani, Manjunath,Ravikumara, Guralamata S.,Prabhu, Kandikere Ramaiah
supporting information; experimental part, p. 1437 - 1442 (2012/07/03)
A chemoselective reduction of olefins and acetylenes is demonstrated by employing catalytic amounts of ferric chloride hexahydrate (FeCl 3·6 H2O) and aqueous hydrazine (NH 2NH2·H2O) as hydrogen source at room temperature. The reduction is chemoselective and tolerates a variety of reducible functional groups. Unlike other metal-catalysed reduction methods, the present method employs a minimum amount of aqueous hydrazine (1.5-2 equiv.). Also, the scope of this method is demonstrated in the synthesis of ibuprofen in aqueous medium. Copyright
Selective Aliphatic C-H Oxidation
-
Page/Page column 14-15, (2011/02/18)
A composition including a complex of a metal, a tetradentate ligand, at least one ancillary ligand, and a counterion may be used for selective sp3 C—H bond oxidation. The tetradentate ligand may include a N-heterocyclic-N,N′-bis(pyridyl)-ethane-1,2-diamine group or a N,N′-bis(heterocyclic)-N,N′-bis(pyridyl)-ethane-1,2-diamine group. The composition can be used in combination with H2O2 to effect highly selective oxidations of unactivated sp3 C—H bonds over a broad range of substrates. The site of oxidation can be predicted, based on the electronic and/or steric environment of the C—H bond. In addition, the oxidation reaction does not require the presence of directing groups in the substrate.
Commercially available neat organozincs as highly reactive reagents for catalytic enantioselective addition to ketones and aldehydes under solvent free conditions
Hatano, Manabu,Mizuno, Tomokazu,Ishihara, Kazuaki
experimental part, p. 4417 - 4424 (2011/08/06)
Neat Et2Zn, Ph2Zn, and highly concentrated Me 2Zn are highly reactive organozinc reagents, which are commercially available in bulk quantities. We here report a catalytic enantioselective Et2Zn, Ph2Zn, and Me2Zn addition to ketones and aldehydes under solvent free or highly concentrated conditions without Ti(Oi-Pr)4 as a conventional activator of organozinc reagents. The desired optically active tertiary and secondary alcohols were obtained in good yield with high enantioselectivity when compared to the conventional solvent-use conditions. From the viewpoint of ecological and environmental reasons in green chemistry, this catalysis would be practical for not only academic but also industrial use.
