60646-30-2

Usage

Uses

Used in Analytical Chemistry:
(S)-(+)-2,2,2-TRIFLUORO-1-(9-ANTHRYL)ETHANOL is used as a chiral solvating agent for the NMR spectral determination of optical purity (and in some cases, absolute configuration) of a wide variety of chiral compounds. Its unique spectroscopic properties allow for the differentiation between enantiomers, providing valuable information on the purity and configuration of the studied compounds.
Used in Pharmaceutical Industry:
In the pharmaceutical industry, (S)-(+)-2,2,2-TRIFLUORO-1-(9-ANTHRYL)ETHANOL is used for the analysis and quality control of chiral drugs. The accurate determination of optical purity is crucial for ensuring the safety and efficacy of chiral pharmaceuticals, as the different enantiomers of a drug can exhibit different biological activities and pharmacological effects.
Used in Research and Development:
(S)-(+)-2,2,2-TRIFLUORO-1-(9-ANTHRYL)ETHANOL is also utilized in research and development for the synthesis and study of novel chiral compounds. Its ability to interact with a wide range of chiral molecules makes it a valuable tool for investigating the structure, properties, and potential applications of these compounds in various fields, such as materials science, catalysis, and biology.

InChI:InChI=1/C16H11F3O/c17-16(18,19)15(20)14-12-7-3-1-5-10(12)9-11-6-2-4-8-13(11)14/h1-9,15,20H/t15-/m0/s1

Upstream product

• 53531-31-0 1-(9-anthracenyl)-2,2,2-trifluoroethan-1-one 
• 60686-64-8 1-(9-anthryl)-2,2,2-trifluoroethanol 
• 123-62-6 propionic acid anhydride 
• 67602-77-1 N,N-bis(2-cyanoethyl)-N',N'-dimethyl-1,2-diaminoethane 
• 1564-64-3 9-Bromoanthracene 

Downstream Products

• 1155859-84-9 (1'S,3S,4S)-1-(9-anthryl)-2,2,2-trifluoroethyl-4-benzyl-5-oxo-3-tetrahydrofurancarboxylate 

Relevant academic research and scientific papers

Ultrasound-Controlled Chiral Separation of Four Amino Acids and 2,2,2-Trifluoro-1-(9-anthryl)ethanol

Chiral separation of 4-hydroxyphenylglycine, phenylglycine, tryptophan, methionine, and 2,2,2-trifluoro-1-(9-anthryl)ethanol (TFAE) was performed under ultrasound reduction at room temperature and high temperature (50 °C). At high temperature (50 °C), both α and Rs were improved slightly under ultrasound reduction as compared to those under non-ultrasonic and ultrasonic irradiation (50 watt/L) conditions. Even at low temperatures, the largest α was observed under ultrasound reduction conditions, except in the case of methionine. However, at low temperature, Rs was reduced under ultrasound (50 watt/L) irradiation, but was improved under ultrasound reduction rather than under the continuous ultrasonic irradiation. Similar to the fact that gradient elution (based on solvent polarity) can improve α, ultrasound reduction can improve α and Rs. Ultrasound reduction is demonstrated to aid the rapid separation of chiral compounds with improved resolution, especially, at high temperatures. Although chromatographic separation using ultrasound has been rarely dealt with until now, ultrasound can be used as an external field in chromatography.

Three-State Switchable Chiral Stationary Phase Based on Helicity Control of an Optically Active Poly(phenylacetylene) Derivative by Using Metal Cations in the Solid State

An unprecedented three-state switchable chiral stationary phase (CSP) for high-performance liquid chromatography (HPLC) was developed using a helical poly(phenylacetylene) bearing a chiral (R)-α-methoxyphenylacetic acid residue as the pendant (poly-1). The left- and right-handed helical conformations were induced in poly-1-based CSP upon coordination with a catalytic amount of soluble sodium and cesium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate salts (MBArF), respectively, which are soluble in the HPLC conditions [hexane-2-propanol (95:5, v/v)]. The switch between the two different helical states of poly-1 can be easily achieved by rinsing the poly-1-based CSP with MeOH and the subsequent addition of the proper MBArF salt. Using this dynamic helical CSP, we demonstrate how changes on the orientation of the secondary structure of a chiral polymer (right-handed, left-handed, and racemic helices) can alter and even invert the elution order of the enantiomers. This study was done without adding chiral additives or changing the mobile phase, which could produce changes on the retention times and make it more difficult to determine the role of the secondary structure during the chiral recognition process.

Three-State Switchable Chiral Stationary Phase Based on Helicity Control of an Optically Active Poly(phenylacetylene) Derivative by Using Metal Cations in the Solid State

An unprecedented three-state switchable chiral stationary phase (CSP) for high-performance liquid chromatography (HPLC) was developed using a helical poly(phenylacetylene) bearing a chiral (R)-α-methoxyphenylacetic acid residue as the pendant (poly-1). The left- and right-handed helical conformations were induced in poly-1-based CSP upon coordination with a catalytic amount of soluble sodium and cesium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate salts (MBArF), respectively, which are soluble in the HPLC conditions [hexane-2-propanol (95:5, v/v)]. The switch between the two different helical states of poly-1 can be easily achieved by rinsing the poly-1-based CSP with MeOH and the subsequent addition of the proper MBArF salt. Using this dynamic helical CSP, we demonstrate how changes on the orientation of the secondary structure of a chiral polymer (right-handed, left-handed, and racemic helices) can alter and even invert the elution order of the enantiomers. This study was done without adding chiral additives or changing the mobile phase, which could produce changes on the retention times and make it more difficult to determine the role of the secondary structure during the chiral recognition process.

Synthesis of new C3 symmetric amino acid- and aminoalcohol-containing chiral stationary phases and application to HPLC enantioseparations

We recently reported a new C3-symmetric (R)-phenylglycinol N-1,3,5-benzenetricarboxylic acid-derived chiral high-performance liquid chromatography (HPLC) stationary phase (CSP 1) that demonstrated better results as compared to a previously described N-3,5-dintrobenzoyl (DNB) (R)-phenylglycinol-derived CSP. Over a decade ago, (S)-leucinol, (R)-phenylglycine, and (S)-leucine derivatives were used as the starting materials of 3,5-DNB-based Pirkle-type CSPs for chiral separation. In this study, three new C3-symmetric CSPs (CSP 2, 3, and 4) were prepared by combining the ideas and results mentioned above. Here we describe the synthetic procedures and applications of the new C3-symmetric CSPs (CSP 2–CSP 4).

Ultrafast chiral separations for high throughput enantiopurity analysis

Recent developments in fast chromatographic enantioseparations now make high throughput analysis of enantiopurity on the order of a few seconds achievable. Nevertheless, routine chromatographic determinations of enantiopurity to support stereochemical investigations in pharmaceutical research and development, synthetic chemistry and bioanalysis are still typically performed on the 5-20 min timescale, with many practitioners believing that sub-minute enantioseparations are not representative of the molecules encountered in day to day research. In this study we develop ultrafast chromatographic enantioseparations for a variety of pharmaceutically-related drugs and intermediates, showing that sub-minute resolutions are now possible in the vast majority of cases by both supercritical fluid chromatography (SFC) and reversed phase liquid chromatography (RP-LC). Examples are provided illustrating how such methods can be routinely developed and used for ultrafast high throughput analysis to support enantioselective synthesis investigations.

New chiral stationary phases based on xanthone derivatives for liquid chromatography

Six chiral derivatives of xanthones (CDXs) were covalently bonded to silica, yielding the corresponding xanthonic chiral stationary phases (XCSPs). The new XCSPs were packed into stainless-steel columns with 150 x 4.6 mm i.d. Moreover, the greening of the chromatographic analysis by reducing the internal diameter (150 x 2.1 mm i.d.) of the liquid chromatography (LC) columns was also investigated. The enantioselective capability of these phases was evaluated by LC using different chemical classes of chiral compounds, including several types of drugs. A library of CDXs was evaluated in order to explore the principle of reciprocity as well as the chiral self-recognition phenomenon. The separation of enantiomeric mixtures of CDXs was investigated under multimodal elution conditions. The XCSPs provided high specificity for the enantiomeric mixtures of CDXs evaluated mainly under normal-phase elution conditions. Furthermore, two XCSPs were prepared with both enantiomers of the same xanthonic selector in order to confirm the inversion order elution.

Preparation and evaluation of regioselectively substituted amylose derivatives for chiral separations

Six novel regioselectively substituted amylose derivatives with a benzoate at 2-position and two different phenylcarbamates at 3- and 6-positions were synthesized and their structures were characterized by 1H nuclear magnetic resonance (NMR) spectroscopy. Their enantioseparation abilities were then examined as chiral stationary phases (CSPs) for high-performance liquid chromatography (HPLC) after they were coated on 3-aminopropyl silica gels. Investigations indicated that the substituents at the 3- and 6-positions played an important role in chiral recognition of these amylose 2-benzoate serial derivatives. The derivatives demonstrated characteristic enantioseparation and some racemates were better resolved on these derivatives than on Chiralpak AD, which is one of the most efficient CSPs, utilizing coated amylose tris(3,5-dimethylphenylcarbamate) as the chiral selector. Among the derivatives prepared, amylose 2-benzoate-3-(phenylcarbamate/4-methylphenylcarbamate)-6-(3,5-dimethylphenylcarbamate) exhibited chiral recognition abilities comparable to that of Chiralpak AD and may be useful CSPs in the future. The effect of mobile phase on chiral recognition was also studied. In general, with the decreased concentration of 2-propanol, better resolutions were obtained with longer retention times. Moreover, when ethanol was used instead of 2-propanol, poorer resolutions were often achieved. However, in some cases, improved enantioselectivity was achieved with ethanol rather than 2-propanol as the mobile phase modifier.

A 3D Homochiral MOF [Cd2(d-cam)3]?2Hdma?4dma for HPLC Chromatographic Enantioseparation

Up to now, some chiral metal-organic frameworks (MOFs) have been reported for enantioseparation in liquid chromatography. Here we report a homochiral MOF, [Cd2(d-cam)3]·2Hdma·4dma, used as a new chiral stationary phase for high-performance liquid chromatographic enantioseparation. Nine racemates of alcohol, naphthol, ketone, and base compounds were used as analytes for evaluating the separation properties of the chiral MOF packed column. Moreover, some effects such as mobile phase composition, column temperature, and analytes mass for separations on this chiral column also were investigated. The relative standard deviations for the resolution values of run-to-run and column-to-column were less than 2.1% and 3.2%, respectively. The experimental results indicate that the homochiral MOF offered good recognition ability, which promotes the application of chiral MOFs use as stationary phase for enantioseparation. Chirality 28:340-346, 2016.

Synthesis of optically active poly(diphenylacetylene)s using polymer reactions and an evaluation of their chiral recognition abilities as chiral stationary phases for HPLC

A series of optically active poly(diphenylacetylene) derivatives bearing a chiral substituent (poly-2S) or chiral and achiral substituents (poly-(2Sx-co-31-x)) on all of their pendant phenyl rings were synthesized by the reaction of poly(bis(4-carboxyphenyl)acetylene) with (S)-1-phenylethylamine ((S)-2) or benzylamine (3) in the presence of a condensing reagent. Their chiroptical properties and chiral recognition abilities as chiral stationary phases (CSPs) for high-performance liquid chromatography (HPLC) were investigated. Poly-2S and poly-(2Sx-co-31-x) (0.06 x-co-31-x)). Furthermore, h-poly-2S and h-poly-(2S0.36-co-30.64) emitted circularly polarized luminescence with opposite signs. h-Poly-2S showed higher chiral recognition abilities toward a larger number of racemates than poly-2S without a preferred-handed helicity and the previously reported preferred-handed poly(diphenylacetylene) derivative bearing the same chiral substituent on half of its pendant phenyl rings. h-Poly-(2S0.36-co-30.64) also exhibited good chiral recognition abilities toward several racemates, though the elution order of some enantiomers was reversed compared with h-poly-2S.

Photochemically immobilized 4-methylbenzoyl cellulose as a powerful chiral stationary phase for enantioselective chromatography

A process to immobilize para-methylbenzoyl cellulose (PMBC) on silica gel has been developed and applied to prepare chiral stationary phases (CSPs) for enantioselective chromatography. The immobilization was achieved by simple irradiation of the polysaccharide derivative with ultraviolet light after coating on a silica gel support. The influence of parameters such as irradiation time and solvent on immobilization effectiveness were investigated. The performance of the prepared immobilized phases were evaluated by injection of a series of racemic compounds onto the packed columns and determination of their chiral recognition ability. By contrast to the classical coated phase, the immobilized CSP can be used under various chromatographic conditions without limitation of organic solvent types as the mobile phase. This extended applicability permits to improve selectivity and to resolve chiral compounds which are not or only poorly soluble in the mobile phases which are compatible with the non-immobilized PMBC stationary phase.