73020-77-6

Upstream product

• 98-85-1 1-Phenylethanol 
• 100-41-4 ethylbenzene 
• 100-42-5 styrene 
• 57-55-6 propylene glycol 
• 73007-56-4 <18O>acetophenone 

Downstream Products

• 73007-56-4 <18O>acetophenone 
• 25570-02-9 3,3',5,5'-tetramethyl-1,1'-biphenyl 
• 137591-57-2 5,5'-oxybis(1,3-dimethylbenzene) 

Relevant academic research and scientific papers

Enantiomer-specific oxygen exchange reactions. 2. Acid-catalyzed water exchange with 1-phenyl-1-alkanols

The rate constants for three competing processes at the chiral center in the acid-catalyzed racemization of (R)-1-phenyl-1-propanol and (R)-1-phenyl-1-butanol at 64.5 ± 1.0 °C have been determined by chiral HPLC and GC/MS methods: oxygen exchange without

Unprecedented Reactivities of Highly Reactive Manganese(III)-Iodosylarene Porphyrins in Oxidation Reactions

We report that Mn(III)-iodosylarene porphyrins, [MnIII(Porp)(sArIO)]+, are capable of activating the C-H bonds of hydrocarbons, including unactivated alkanes such as cyclohexane, with unprecedented reactivities, such as a low kinetic isotope effect, a saturation behavior of reaction rates, and no electronic effect of porphyrin ligands on the reactivities of [MnIII(Porp)(sArIO)]+. In oxygen atom transfer (OAT) reactions, the sulfoxidation of para-X-substituted thioanisoles by [MnIII(Porp)(sArIO)]+ affords a very unusual behavior in the Hammett plot with the saturation behavior of reaction rates and no electronic effect of porphyrin ligands on reactivities. The reactivities and mechanisms of [MnIII(Porp)(sArIO)]+ are then compared with those of the corresponding MnIV(Porp)(O) complex. The present study reports the first example of highly reactive Mn(III)-iodosylarene porphyrins with unprecedented reactivities in C-H bond activation and OAT reactions.

Selective C-H halogenation over hydroxylation by non-heme iron(iv)-oxo

Non-heme iron based halogenase enzymes promote selective halogenation of the sp3-C-H bond through iron(iv)-oxo-halide active species. During halogenation, competitive hydroxylation can be prevented completely in enzymatic systems. However, synthetic iron(iv)-oxo-halide intermediates often result in a mixture of halogenation and hydroxylation products. In this report, we have developed a new synthetic strategy by employing non-heme iron based complexes for selective sp3-C-H halogenation by overriding hydroxylation. A room temperature stable, iron(iv)-oxo complex, [Fe(2PyN2Q)(O)]2+ was directed for hydrogen atom abstraction (HAA) from aliphatic substrates and the iron(ii)-halide [FeII(2PyN2Q)(X)]+ (X, halogen) was exploited in conjunction to deliver the halogen atom to the ensuing carbon centered radical. Despite iron(iv)-oxo being an effective promoter of hydroxylation of aliphatic substrates, the perfect interplay of HAA and halogen atom transfer in this work leads to the halogenation product selectively by diverting the hydroxylation pathway. Experimental studies outline the mechanistic details of the iron(iv)-oxo mediated halogenation reactions. A kinetic isotope study between PhCH3 and C6D5CD3 showed a value of 13.5 that supports the initial HAA step as the RDS during halogenation. Successful implementation of this new strategy led to the establishment of a functional mimic of non-heme halogenase enzymes with an excellent selectivity for halogenation over hydroxylation. Detailed theoretical studies based on density functional methods reveal how the small difference in the ligand design leads to a large difference in the electronic structure of the [Fe(2PyN2Q)(O)]2+ species. Both experimental and computational studies suggest that the halide rebound process of the cage escaped radical with iron(iii)-halide is energetically favorable compared to iron(iii)-hydroxide and it brings in selective formation of halogenation products over hydroxylation.

Pd-Catalyzed Aerobic Oxidation Reactions: Strategies to Increase Catalyst Lifetimes

The palladium complex [(neocuproine)Pd(μ-OAc)]2[OTf]2 (1, neocuproine = 2,9-dimethyl-1,10-phenanthroline) is an effective catalyst precursor for the selective oxidation of primary and secondary alcohols, vicinal diols, polyols, and carbohydrates. Both air and benzoquinone can be used as terminal oxidants, but aerobic oxidations are accompanied by oxidative degradation of the neocuproine ligand, thus necessitating high Pd loadings. Several strategies to improve aerobic catalyst lifetimes were devised, guided by mechanistic studies of catalyst deactivation. These studies implicate a radical autoxidation mechanism initiated by H atom abstraction from the neocuproine ligand. Ligand modifications designed to retard H atom abstractions as well as the addition of sacrificial H atom donors increase catalyst lifetimes and lead to higher turnover numbers (TON) under aerobic conditions. Additional investigations revealed that the addition of benzylic hydroperoxides or styrene leads to significant increases in TON as well. Mechanistic studies suggest that benzylic hydroperoxides function as H atom donors and that styrene is effective at intercepting Pd hydrides. These strategies enabled the selective aerobic oxidation of polyols on preparative scales using as little as 0.25 mol % of Pd, a major improvement over previous work.

Interplay of Experiment and Theory in Elucidating Mechanisms of Oxidation Reactions by a Nonheme RuIVO Complex

A comprehensive experimental and theoretical study of the reactivity patterns and reaction mechanisms in alkane hydroxylation, olefin epoxidation, cyclohexene oxidation, and sulfoxidation reactions by a mononuclear nonheme ruthenium(IV)-oxo complex, [RuIV(O)(terpy)(bpm)]2+ (1), has been conducted. In alkane hydroxylation (i.e., oxygen rebound vs oxygen non-rebound mechanisms), both the experimental and theoretical results show that the substrate radical formed via a rate-determining H atom abstraction of alkanes by 1 prefers dissociation over oxygen rebound and desaturation processes. In the oxidation of olefins by 1, the observations of a kinetic isotope effect (KIE) value of 1 and styrene oxide formation lead us to conclude that an epoxidation reaction via oxygen atom transfer (OAT) from the RuIVO complex to the C-C double bond is the dominant pathway. Density functional theory (DFT) calculations show that the epoxidation reaction is a two-step, two-spin-state process. In contrast, the oxidation of cyclohexene by 1 affords products derived from allylic C-H bond oxidation, with a high KIE value of 38(3). The preference for H atom abstraction over C-C double bond epoxidation in the oxidation of cyclohexene by 1 is elucidated by DFT calculations, which show that the energy barrier for C-H activation is 4.5 kcal mol-1 lower than the energy barrier for epoxidation. In the oxidation of sulfides, sulfoxidation by the electrophilic Ru-oxo group of 1 occurs via a direct OAT mechanism, and DFT calculations show that this is a two-spin-state reaction in which the transition state is the lowest in the S = 0 state.

Mechanistic elucidation of C-H oxidation by electron rich non-heme iron(IV)-oxo at room temperature

Non-heme iron(iv)-oxo species form iron(iii) intermediates during hydrogen atom abstraction (HAA) from the C-H bond. While synthesizing a room temperature stable, electron rich, non-heme iron(iv)-oxo compound, we obtained iron(iii)-hydroxide, iron(iii)-alkoxide and hydroxylated-substrate-bound iron(ii) as the detectable intermediates. The present study revealed that a radical rebound pathway was operative for benzylic C-H oxidation of ethylbenzene and cumene. A dissociative pathway for cyclohexane oxidation was established based on UV-vis and radical trap experiments. Interestingly, experimental evidence including O-18 labeling and mechanistic study suggested an electron transfer mechanism to be operative during C-H oxidation of alcohols (e.g. benzyl alcohol and cyclobutanol). The present report, therefore, unveils non-heme iron(iv)-oxo promoted substrate-dependent C-H oxidation pathways which are of synthetic as well as biological significance.

Mechanistic insight into the hydroxylation of alkanes by a nonheme iron(V)-oxo complex

Hydroxylation of alkanes by a mononuclear nonheme iron(v)-oxo complex, [Fe(v)(O)(TAML)]-, is initiated by a rate-determining hydrogen atom (H-atom) abstraction, followed by an oxygen non-rebound process. Evidence for the H-atom abstraction-oxygen non-rebound mechanism is obtained experimentally and supported by DFT calculations. the Partner Organisations 2014.

Reactivity of an iron-oxygen oxidant generated upon oxidative decarboxylation of biomimetic iron(II) α-hydroxy acid complexes

Three biomimetic iron(II) α-hydroxy acid complexes, [(Tp Ph2)FeII(mandelate)(H2O)] (1), [(Tp Ph2)FeII(benzilate)] (2), and [(TpPh2)Fe II(HMP)] (3), together with two iron(II) α-methoxy acid complexes, [(TpPh2)FeII(MPA)] (4) and [(Tp Ph2)FeII(MMP)] (5) (where HMP = 2-hydroxy-2- methylpropanoate, MPA = 2-methoxy-2-phenylacetate, and MMP = 2-methoxy-2-methylpropanoate), of a facial tridentate ligand TpPh2 [where TpPh2 = hydrotris(3,5-diphenylpyrazole-1-yl)borate] were isolated and characterized to study the mechanism of dioxygen activation at the iron(II) centers. Single-crystal X-ray structural analyses of 1, 2, and 5 were performed to assess the binding mode of an α-hydroxy/methoxy acid anion to the iron(II) center. While the iron(II) α-methoxy acid complexes are unreactive toward dioxygen, the iron(II) α-hydroxy acid complexes undergo oxidative decarboxylation, implying the importance of the hydroxyl group in the activation of dioxygen. In the reaction with dioxygen, the iron(II) α-hydroxy acid complexes form iron(III) phenolate complexes of a modified ligand (TpPh2*), where the ortho position of one of the phenyl rings of TpPh2 gets hydroxylated. The iron(II) mandelate complex (1), upon decarboxylation of mandelate, affords a mixture of benzaldehyde (67%), benzoic acid (20%), and benzyl alcohol (10%). On the other hand, complexes 2 and 3 react with dioxygen to form benzophenone and acetone, respectively. The intramolecular ligand hydroxylation gets inhibited in the presence of external intercepting agents. Reactions of 1 and 2 with dioxygen in the presence of an excess amount of alkenes result in the formation of the corresponding cis-diols in good yield. The incorporation of both oxygen atoms of dioxygen into the diol products is confirmed by 18O-labeling studies. On the basis of reactivity and mechanistic studies, the generation of a nucleophilic iron-oxygen intermediate upon decarboxylation of the coordinated α-hydroxy acids is proposed as the active oxidant. The novel iron-oxygen intermediate oxidizes various substrates like sulfide, fluorene, toluene, ethylbenzene, and benzaldehyde. The oxidant oxidizes benzaldehyde to benzoic acid and also participates in the Cannizzaro reaction.

A highly reactive mononuclear non-heme manganese(IV)-oxo complex that can activate the strong C-H bonds of alkanes

A mononuclear non-heme manganese(IV)-oxo complex has been synthesized and characterized using various spectroscopic methods. The Mn(IV)-oxo complex shows high reactivity in oxidation reactions, such as C-H bond activation, oxidations of olefins, alcohols, sulfides, and aromatic compounds, and N-dealkylation. In C-H bond activation, the Mn(IV)-oxo complex can activate C-H bonds as strong as those in cyclohexane. It is proposed that C-H bond activation by the non-heme Mn(IV)-oxo complex does not occur via an oxygen-rebound mechanism. The electrophilic character of the non-heme Mn(IV)-oxo complex is demonstrated by a large negative ρ value of -4.4 in the oxidation of para-substituted thioanisoles.

Use of tunable ligands allows for intermolecular Pd-catalyzed C-O bond formation

Bulky biaryl phosphine ligands facilitate Pd-catalyzed C-O coupling reactions of aryl halides with primary and secondary alcohols by promoting reductive elimination at the expense of β-hydride elimination. The key to their success is the ability to match the size of the ligand to that of the combination of substrates. The efficient coupling of a number of unactivated aryl chlorides and bromides with cyclic and acyclic secondary alcohols was achieved. This included the coupling of allylic alcohols for the first time in a Pd-catalyzed coupling process.