92495-53-9Relevant academic research and scientific papers
Facile synthesis of NC(sp3)O pincer palladium complexes and their use as efficient catalysts for Suzuki-Miyaura reaction of aryl bromides in aqueous medium
Gong, Jun-Fang,Li, Nan,Pan, Ya-Ping,Song, Mao-Ping,Yang, Jing-Jing,Zhu, Zhi-Wu
, (2020/12/15)
Two NC(sp3)O pincer palladium(II) complexes 3a-3b were readily prepared in high yields in only two steps. Of the first step, catalytic hydrophosphination of 2-alkenoylpyridines and subsequent in situ phosphine oxidation produced the NC(sp3)O pincer preligands 2a-2b. The second step is palladation of the preligands 2a-2b where PdCl2 was used as the Pd source to afford the desired Pd pincers 3a-3b via C(sp3)-H bond activation. Single crystal X-ray diffraction analysis of complex 3a unambiguously confirmed the NCO tridentate coordination mode of the complexes. The two complexes 3a-3b were applied to catalyze the Suzuki-Miyaura reaction. Complex 3b was found to be more efficient and exhibited very high activity in the Suzuki reaction of structurally diverse aryl bromides with arylboronic acids in aqueous ethanol under air. At a reaction temperature of 70 °C, a TON of up to 1.9 × 105 and a TOF of up to 9800 h?1 were achieved. At lower temperatures 3b was still very active, giving a TON of up to 9.5 × 103 and a TOF of up to 3900 h?1 at room temperature.
Highly Active Fe3O4@SBA-15@NHC-Pd Catalyst for Suzuki–Miyaura Cross-Coupling Reaction
?zdemir, ?smail,Akko?, Mitat,Alt?n, Serdar,Bu?day, Nesrin,Ya?ar, Sedat
, (2021/08/03)
A novel Pd-NHC functionalized magnetic Fe3O4@SBA-15@NHC-Pd was synthesized and used as an efficient heterogeneous catalyst in the Suzuki–Miyaura C–C bond formation reactions. The Fe3O4@SBA-15@NHC-Pd characterized by X-Ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), Fourier Transform Infrared (FTIR) spectroscopy, Scanning Electron Microscopy (SEM), Transmission Electron Microscopy?(TEM), Energy Dispersive X-ray analysis (EDX), Thermogravimetric Analysis (TGA), Differential Thermal Analysis (DTA). The Inductively Coupled Plasma-Optical emission spectroscopy (ICP-OES)?analysis was used to determine the exact amount of Pd (0.33?wt%) in Fe3O4@SBA-15@NHC-Pd. The TEM images of the catalyst showed the existence of palladium nanoparticles immobilized in the catalyst's structure, while no reducing agent was used. The NHC moieties in the catalyst structure could be stabilize Pd(0) nanoparticles prevents agglomeration. The magnetic catalyst was effectively used in the Suzuki–Miyaura cross-coupling reaction of substituted phenylboronic acid derivatives with (hetero)aryl bromides in the presence of a K2CO3 at room temperature in aqueous media and magnetic catalyst could be simply extracted from the reaction mixture by an external magnet. Different aryl bromides were converted to coupled-products in excellent yields with spectacular TOFs values (up to 1,960,339?h?1); in the presence of 1?mg of Fe3O4@SBA-15@NHC-Pd catalyst (contains 3.1 × 10–6?mol% Pd) at room temperature in aqueous media. After reusability experiments, it is found that this catalyst was effectively used up to ten times in the reaction with almost consistent catalytic efficiency. A decrease in the activity of the 10th reused catalyst was found as 9%. Graphic Abstract: [Figure not available: see fulltext.]
Magnetite@MCM-41 nanoparticles as support material for Pd-N-heterocyclic carbene complex: A magnetically separable catalyst for Suzuki–Miyaura reaction
Akko?, Mitat,Bu?day, Nesrin,Alt?n, Serdar,Ya?ar, Sedat
, (2021/03/22)
The Magnetite@MCM-41@NHC@Pd catalyst was obtained with Pd metal bound to the NHC ligand anchored to the surface of Fe3O4@MCM-41. It was characterized by Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), energy disperse X-ray analysis (EDX), thermogravimetric analysis (TGA), differential thermal analysis (DTA), and scanning electron microscopy (SEM). The amount of Pd in the Magnetite@MCM-41@NHC@Pd was measure by inductively coupled plasma–optical emission spectroscopy (ICP-OES) analysis. The catalytic activity of Magnetite@MCM-41@NHC@Pd heterogeneous catalyst done on Suzuki–Miyaura reactions of aryl halides with different substituted arylboronic acid derivatives. All coupling reactions afforded excellent yields and up to 408404 Turnover Frequency (TOF) h?1 in the presence of 2 mg of Magnetite@MCM-41@NHC@Pd catalyst (0.0564 mmol g?1, 0.01127 mmol% Pd) at room temperature in 2-propanol/H2O (1:2). Moreover, Magnetite@MCM-41@NHC@Pd catalyst was recover by applying the magnet and reused for another reaction. The catalyst showed excellent structural and chemical stability and reused ten times without a substantial loss in its catalytic performance.
N-heterocyclic carbene Pd(II) complex supported on Fe3O4@SiO2: Highly active, reusable and magnetically separable catalyst for Suzuki-Miyaura cross-coupling reactions in aqueous media
Akko?, Mitat,Bu?day, Nesrin,Alt?n, Serdar,Kiraz, Nadir,Ya?ar, Sedat,?zdemir, ?smail
, (2021/05/05)
A new type magnetic nano Fe3O4@SiO2@NHC@Pd-MNPs heterogeneous catalyst was fabricated and characterized by Fourier Transform Infrared (FTIR) spectroscopy, Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), Energy Disperse X-ray analysis (EDX), Thermogravimetric Analysis (TGA), Differential Thermal Analysis (DTA), and Scanning Electron Microscopy (SEM). The loading amount of Palladium (Pd) to magnetic nano Fe3O4@SiO2@NHC@Pd-MNPs was measured by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) analysis. The catalytic activity of magnetic nano Fe3O4@SiO2@NHC@Pd-MNPs heterogeneous catalyst was examined on Suzuki-Miyaura cross-coupling reactions of aryl halides with different substituted arylboronic acid derivatives. All coupling reactions yielded excellent results and high TOF (up to 76528 h?1) in the presence of 2 mg of Fe3O4@SiO2@NHC@Pd-MNPs catalyst (0.0197 mmolg?1, 0.00394 mmol%Pd) at 80 °C in 2-propanol/H2O (1:2). In addition, the magnetic nano Fe3O4@SiO2@NHC@Pd-MNPs catalyst was easily recovered by using an external Nd-magnet and reused for the Suzuki cross-coupling reactions. The catalyst showed strong structural and chemical stability and was reused six times without losing its catalytic activity substantially.
Palladium nanoparticle supported on nitrogen-doped porous carbon: Investigation of structural properties and catalytic activity on Suzuki–Miyaura reactions
Bu?day, Nesrin,Alt?n, Serdar,Ya?ar, Sedat
, (2021/08/25)
Novel palladium-doped nanoporous carbon composite material obtained via thermolysis of amorphous zeolitic imidazolate framework (aZIF) was synthesized and used as an efficient catalyst on Suzuki–Miyaura cross-coupling reactions of aryl bromides. With this developed catalytic system, the Suzuki–Miyaura cross-coupling reaction was accomplished in aqueous solutions, and biaryls were obtained in good to excellent yields in a short reaction time. The APC-750@Pd catalyst was characterized by Fourier Transform Infrared spectroscopy (FTIR), X-ray Diffraction (XRD), Scanning Electron Eicroscopy (SEM), X-ray Photoelectron Spectroscopy (XPS), Transmission Electron Microscopy (TEM), Thermal Gravimetric Analysis (TGA), Differential Thermal Analysis (DTA), Inductively Coupled Plasma Mass Spectrometry (ICP-MS) and Brunauer–Emmett–Teller (BET) analysis tecniques. N-doped porous carbon material (NPC-1000) was synthesized by thermolysis from aZIF. Activated porous carbon material (APC-750) was fabricated via fused at 750°C with KOH from NPC-1000. The APC-750@Pd was obtained as a result of the interaction of APC-750 and PdCl2 in deionized water. The cross-coupling reaction of different aryl bromides with phenylboronic acid was investigated to show the potential of the APC-750@Pd in the Suzuki–Miyaura cross-coupling reactions. The APC-750@Pd catalyst could be recycled at least five times with a 15% loss of catalytic efficiency in this catalytic system.
Bis-N,N-aminophosphine (PNP) crosslinked poly(p-tert-butyl styrene) particles: A new support for heterogeneous palladium catalysts for Suzuki coupling reactions
Vece, Vito,Szeto, Kai C.,Charlin, Marc O.,Rouge, Pascal,De Mallmann, Aimery,Taam, Manel,Dugas, Pierre-Yves,Lansalot, Muriel,D'Agosto, Franck,Taoufik, Mostafa
, (2019/06/18)
Crosslinked polymer particles carrying hemilabile bis-N,N-aminophosphine (PNP) moieties are obtained by the copolymerization of a PNP-derived monomer bearing four vinyl fragments as cross-linkers, with para-tert-butylstyrene and divinylbenzene, using free radical copolymerization in presence of AIBN, performed in aqueous dispersed medium. This new support was characterized by thermogravimetric analysis, elemental analysis, laser diffraction, solid state NMR. The PNP moiety could allow monochelation to palladium. The resulting insoluble Pd-catalyst revealed to be very active for Suzuki cross-coupling with several substrates, allowing separation of the product from the catalyst by filtration. The final palladium PS-PNP catalyst could be reused for several catalytic cycles.
Schiff-based Pd(II)/Fe(III) bimetallic self-assembly monolayer—preparation, structure, catalytic dynamic and synergistic
Huang, Pingping,Song, Erran,Sun, Yimeng,Li, Tiesheng,Wei, Donghui,Liu, Minghua,Wu, Yangjie
, p. 75 - 86 (2019/03/13)
Graphene oxide supported Pd (II)/Fe (III) bimetallic catalytic monolayer (denoted as GO@H-Pd/Fe) was prepared and characterized. Its catalytic performances for Suzuki coupling reaction, synergetic effect and catalytic mechanism were systematic investigated. Results showed that orientation, composition and distribution of catalyst had efficient effect on catalytic activity. Catalytic activity of GO@H-Pd0.10/Fe0.90 was 475 times more than that of GO@H-Pd due to the ordered catalytic monolayer immobilized on GO, proper ratio of Pd/Fe and the synergetic effect between Pd(II) and Fe(III) which could form active cluster containing Pd and Fe. The Pd(II) could be made more negative by transferring electron from GO to Fe(III) via ligand and then to Pd, improving its catalytic activity since it was easy for oxide addition. It also exhibited better stability and recyclability at least 8 times due to proper functional ligand and support. Deactivation mechanism was confirmed to be the aggregation of active centre during the recycling. Heterogeneous catalytic mechanism was also proved by poison test, hot filtration and ReactIR. The results of ReactIR presented different dynamic catalytic process for GO@H-Pd0.10Fe0.90 and homogeneous catalyst (Li2PdCl4/FeCl3·6H2O).The activation energies were 9.7 KJ/mol and 3.7 KJ/mol obtained for heterogeneous and homogeneous catalyst, respectively. Considering the diffusion effect, the factor of supports on the activity was also investigated by ReactIR, with which that GO@H-Pd0.10Fe0.90 catalytic activity was higher than that of homogeneous catalyst could be confirmed.
The Highly Efficient Suzuki–Miyaura Cross-Coupling of (Hetero)aryl Chlorides and (Hetero)arylboronic Acids Catalyzed by “Bulky-yet-Flexible” Palladium–PEPPSI Complexes in Air
Ouyang, Jia-Sheng,Li, Yan-Fang,Huang, Fei-Dong,Lu, Dong-Dong,Liu, Feng-Shou
, p. 371 - 375 (2017/12/15)
A series of Pd–PEPPSI complexes were designed and synthesized. The relationship between catalyst structure and properties was systematically investigated. It was revealed that “bulky-yet-flexible” C3 bearing ancenaphthyl backbone was a highly efficient precatalyst and could be successfully employed in Suzuki–Miyaura reactions of (hetero)aryl chlorides with (hetero)arylboronic acids at a low palladium loading in the presence of a weak inorganic base in air.
Cathodic aromatic C,C cross-coupling reaction via single electron transfer pathway
Qu, Yang,Tateno, Hiroyuki,Matsumura, Yoshimasa,Kashiwagi, Tsuneo,Atobe, Mahito
supporting information, (2017/03/23)
We have successfully developed a novel cathodic cross-coupling reaction of aryl halides with arenes. Utilization of the cathodic single electron transfer (SET) mechanism for activation of aryl halides enables the cross-coupling reaction to proceed without the need for any transition metal catalysts or single electron donors in a mild condition. The SET from a cathode to an aryl halide initiates a radical chain by giving an anion radical of the aryl halide. The following propagation cycle also consists entirely of anion radical intermediates.
Nanopalladium on polyethylenimine–grafted starch: An efficient and ecofriendly heterogeneous catalyst for Suzuki–Miyaura coupling and transfer hydrogenation reactions
Fu, Lixia,Deng, Wenxiu,Liu, Lujie,Peng, Yanqing
, (2017/10/06)
Functionalized natural polysaccharides are attractive supports for colloidal metal nanocatalysts due to their abundance, cheapness, biocompatibility and biodegradability. In this study, isocyanate–functionalized starch was prepared by treating with diisocyanate. Polyethylenimine grafted onto starch via the formation of urea linker. The palladium nanoparticles deposited starch PEIS@Pd(0) was obtained through a chelating–in situ reduction procedure. Characterization of these materials was done using Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X–ray diffraction, and inductive coupled plasma atomic emission spectrometry. The catalytic activity of PEIS@Pd(0) was then tested in two series of model reactions: Suzuki–Miyaura coupling and transfer hydrogenation. The catalyst could be recovered by simple filtration and was reused for five times without significant loss of catalytic activity, which confirmed the good stability of the catalyst.
