948038-95-7Relevant academic research and scientific papers
Switching from Ethylene Trimerization to Ethylene Polymerization by Chromium Catalysts Bearing SNS Tridentate Ligands: Process Optimization Using Response Surface Methodology
Soheili, Majid,Mohamadnia, Zahra,Karimi, Babak
, p. 3685 - 3700 (2018)
Two types of chromium catalysts bearing pyridine and amine based SNS ligands under the title of (pyridine-SNS-alkyl/CrCl3) and (amine-SNS-alkyl/CrCl3) were synthesized. Different thiolates such as octyl, pentyl, butyl, cyclohexyl and cyclopentyl thiolates were reacted with 2,6-pyridine-dimethylene-ditosylate (PMT)/THF solution at room temperature. Then, the purified pyridine-based SNS ligands (1–5) were reacted with CrCl3 (THF)3 to obtain the pyridine-SNS-alkyl/CrCl3 catalysts (6–10) in 50–70% yields. MMAO-activated pyridine-SNS-alkyl/CrCl3 catalysts were capable of oligomerizing ethylene. Statistical experimental design was conducted using the central composite design method and surface methodology to study of the effect of important parameters such as ethylene pressure, Al/Cr ratio, catalyst concentration and the reaction temperature on 1-C6 productivity of catalyst (7). A quadratic polynomial equation was developed to predict the 1-C6 productivity. Ethylene oligomerization using the catalyst (7) was lead to a optimized reaction conditions, including the ethylene pressure of 19.5?bar, the temperature of 58.2?°C, the MMAO co-catalyst, Al/Cr = 841 and the catalyst concentration of 8.7?μmol. The catalytic properties for ethylene oligomerization are strongly affected by reaction temperature. The experimental results indicated the reasonable agreement with the predicted values. The transformation from ethylene trimerization to ethylenev polymerization of catalyst system (7) was occurred by exchanging the reaction pressure. Influence of ligand structure with different substitutions on sulphur atom on productivity and selectivity was investigated. 1-C6 with the high selectivity and productivity 4318 (g 1-C6/g Cr h) was obtained for catalyst (7). In the second part, 1-C6 was obtained with high selectivity and productivity around 141 × 103 (g 1-C6/g Cr h) for amine-based catalyst. All amine-based catalysts (14–16) showed considerably higher catalytic activities compared to pyridine-based catalysts. According to the TGA analysis the thermal stability of pyridine-based catalysts was found to be higher than the amine-based catalysts. Graphical Abstract: Chromium complexes bearing pyridine and amine based SNS ligands have been synthesized and their catalytic performance in ethylene oligomerization has been investigated. A switching from ethylene trimerization to ethylene polymerization of the catalyst (7) was obtained utilizing exchanging of the ethylene pressure. [Figure not available: see fulltext.].
Coordination chemistry of Co complexes containing tridentate SNS ligands and their application as catalysts for the oxidation of n-octane
Soobramoney, Lynette,Bala, Muhammad D.,Friedrich, Holger B.
, p. 15968 - 15978 (2015/01/08)
The selective oxidation of saturated hydrocarbons to terminal oxygenates under mild catalytic conditions has remained a centuries long challenge in chemical catalysis. In an attempt to address this challenge, two series of tridentate donor ligands {2,6-bis(RSCH2)pyridine and bis(RSCH2CH2)amine [R = alkyl, aryl]} and their respective cobalt complexes {Co[2,6-bis(RSCH2)pyridine]Cl2 and Co[bis(RSCH2CH2)amine]Cl2} were synthesized and characterized. Crystal structures of Co[2,6-bis(RSCH2)pyridine]Cl2 [R = -CH3 (1), -CH2CH3 (2), -CH2CH2CH2CH3 (3) and -C6H5 (4)] are reported in which 1 crystallized as a homo-bimetallic dimer that incorporated two bridging chloride atoms in an octahedral geometry around each cobalt center, while 2, 3 and 4 crystallized as mono-metallic species characterized by trigonal bipyramidal arrangement of ligands around each cobalt center. As catalysts for the homogeneous selective oxidation of n-octane, the catalysts yielded ketones as the dominant products with a selectivity of ca. 90% for the most active catalyst Co[bis(CH2CH2SCH2CH2)amine]Cl2 (6) at a total n-octane conversion of 23%. Using tert-butyl hydroperoxide (TBHP) as an oxidant, optimization of reaction conditions is also reported.
