MATERIAL SAFETY DATA SHEET
1. IDENTIFICATION OF SUBSTANCE/PREPARATION & COMPANY.
PRODUCT NAME: OAKMOSS ABSOLUTE, GREEN
PRODUCT CODE: 30496
SUPPLIER: The Soap Kitchen, Unit 2e Hatchmoor Ind/Est, Torrington, EX38 7HP
Emergency Tel No: 01805 622944 Emergency Contact: Mr. Richard Phillips

2. COMPOSITION / INFORMATION ON INGREDIENTS.
DEFINITION/BOTANICAL ORIGIN: Obtained by solvent extraction from the plant Evernia prunastri
H-No: 3301.90.5000 CAS No: 9000-50-4 Status: Natural
CoE No: 194 FEMA: 2795 Additives: None
FDA: 172.510 IFRA: Conforms Application: Perfumery, aromatherapy, flavouring
RIFM: EINECS: 289-861-3 RTECS:
INCI name: Evernia prunastri FCCIV:

3. HAZARDS IDENTIFICATION:
Xi Irritant

4. FIRST-AID MEASURES:
INHALATION: Remove from exposure site to fresh air. Keep at rest. Obtain medical
attention.
EYE CONTACT: Rinse immediately with plenty of water for at least 15 mins. Contact a doctor if
symptoms persist.
SKIN CONTACT: Remove contaminated clothes. Wash thoroughly with soap & water,
flush with plenty of water. If irritation persists, seek medical advice.
Rinse mouth out with water. Seek medical advice immediately.
INGESTION:
OTHER: When assessing action take Risk & Safety Phrases into account
(Section 15)

5. FIRE FIGHTING MEASURES.
EXTINGUISHING MEDIA Use CO2, Dry Powder or Foam type Extinguishers, spraying
extinguishing media to base of flames. Do not use direct water jet on
RECOMMENDED:
burning material.
SPECIAL MEASURES: Avoid vapour inhalation. Keep away from sources of ignition. Do not
smoke. Wear positive pressure self-contained breathing apparatus &
protective clothing.
EXTINGUISHING PROCEDURES: Closed containers may build up pressure when exposed to heat and
should be cooled with water spray.

6. ACCIDENTAL RELEASE MEASURES.
PERSONAL PRECAUTIONS: Avoid inhalation & direct contact with skin & eyes. Use individual
protective equipment (safety glasses, waterproof-boots, suitable
protective clothing) in case of major spillages.
ENVIRONMENT PRECAUTIONS: Keep away from drains, soils, surface & groundwaters.
CLEANING UP METHODS Remove all potential ignition sources. Contain spilled material. Cover
with an inert or non-combustible inorganic absorbent material, sweep
FOR SPILLAGES:
up and remove to an approved disposal container. Observe state,
federal & local disposal regulations.




PDF created with pdfFactory trial version www.pdffactory.com
 7. HANDLING & STORAGE.
PRECAUTIONS IN HANDLING: Apply good manufacturing practice & industrial hygiene practices,
ensuring proper ventilation. Observe good personal hygiene, and do
not eat, drink or smoke whilst handling.
STORAGE CONDITIONS: Store in tightly closed original container, in a cool, dry & ventilated area
away from heat sources & protected from light. Keep air contact to a
minimum. If possible, use metallic packaging with inside protective coat
and avoid plastic and white iron packaging.
FIRE PROTECTION: Keep away from ignition sources & naked flames. Take precautions to
avoid static discharges in working area.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION.
RESPIRATORY PROTECTION: Avoid breathing product vapour. Apply local ventilation where possible.
VENTILATION: Ensure good ventilation of working area.
HAND PROTECTION: Avoid all skin contact. Use chemically resistant gloves if required.
EYE PROTECTION: Use safety glasses.
WORK/HYGIENE PRACTICES: Wash hands with soap & water after handling.

9. PHYSICAL & CHEMICAL PROPERTIES.
COLOUR: Green-brown
APPEARANCE: Viscous liquid
ODOUR: Characteristic, slightly balsamic
FLASH POINT ??C: >70
Specific gravity (@25??C): 1.020 ?? 1.035
Refractive index (@ 20??C): 1.500 - 1.535

10. STABILITY & REACTIVITY.
REACTIVITY: It presents no significant reactivity hazards, by itself or in contact with
water. Avoid contact with strong acids, alkali or oxidising agents.
DECOMPOSITION: Liable to cause smoke & acrid fumes during combustion: carbon
monoxide, carbon dioxide & other non-identified organic compounds
may be formed.

11. TOXICOLOGICAL INFORMATION.
No toxicological data available

12. ECOLOGICAL INFORMATION.
BIODEGRADABILITY: Data not available
PRECAUTIONS: Prevent surface contamination of soil, ground & surface water.

13. DISPOSAL CONSIDERATIONS.
Avoid disposing to drainage systems and into the environment. Seek expert advice.

14. TRANSPORT REGULATIONS.
Road (ADR/RID: n/a
Air (IATA/ICAO): n/a
SEA (IMDG): n/a
CHIP: See section 15




PDF created with pdfFactory trial version www.pdffactory.com
 15. REGULATORY INFORMATION. According to Directive 88/379/EEC
HAZARDS: Irritant
SYMBOLS: Xi
RISK PHRASES: R36/37/38 Irritating to eyes, respiratory system and skin
R43 May cause sensitisation by skin contact
SAFETY PHRASES: S26 In case of contact with eyes, rinse immediately with plenty of water
and seek medical advice
S24/S37 - avoid contact with skin
S36 Wear suitable protective clothing

16. OTHER INFORMATION.
Cosmetics Directive 7th Amendment: Product classed as a potential sensitiser

PACKAGING:
Type Suitability
Glass Yes
Lacquer lined steel/tin Yes
Aluminium Yes
HPPE No
F/HDPE Yes
Other plastic No

SHELF LIFE
When stored within advised conditions, re-test after 12 months, then at 3 monthly intervals up to a
maximum shelf life of 36 months.

Q.C. REQUIREMENTS.
In-line with general product specification. Always satisfy suitability for specific application.

The data provided in this material safety data sheet is meant to represent typical data/analysis for this
product and is correct to the best of our knowledge. The data was obtained from current and reliable
sources, but is supplied without warranty, expressed or implied, regarding its?? correctness or accuracy.
It is the user's responsibility to determine safe conditions for the use of this product, and to assume
liability for loss, injury, damage or expense arising from improper use of this product. The information
provided does not constitute a contract to supply to any specification, or for any given application, and
buyers should seek to verify their requirements and product use.




PDF created with pdfFactory trial version www.pdffactory.com


FEMA 2795