- Selective ruthenium-catalyzed transfer hydrogenations of nitriles to amines with 2-butanol
-
Transfer your hydrogen: Fast and general transfer hydrogenation of nitriles to form primary amines is possible with a homogeneous Ru/1,4- bis(diphenylphosphino)butane (DPPB) catalyst (see scheme). The use of 2-butanol as the hydrogen-transfer reagent is essential for the selective reduction of aromatic, heteroaromatic, and aliphatic nitriles with this system. Copyright
- Werkmeister, Svenja,Bornschein, Christoph,Junge, Kathrin,Beller, Matthias
-
-
Read Online
- Copper catalyzed reduction of azides with diboron under mild conditions
-
We report herein the first Cu catalyzed reduction of azides with B2pin2 (pin = pinacolato) as the reductant under very mild conditions. A series of primary amines and amides were obtained in moderate to excellent yields with high chemoselectivity and good functional group tolerance. This reaction can be performed with a cheap copper salt, a simple NHC ligand and a diboron reagent.
- Chen, Yang,Deng, Shengqi,Gao, Yihua,Liu, Liwen,Liu, Yu,Lu, Da,Wang, Qianwen,Zhang, Xiao
-
-
Read Online
- Hydrogenation of Nitriles and Ketones Catalyzed by an Air-Stable Bisphosphine Mn(I) Complex
-
Efficient hydrogenations of nitriles and ketones with molecular hydrogen catalyzed by a well-defined bench-stable bisphosphine Mn(I) complex are described. These reactions are environmentally benign and atomically economic, implementing an inexpensive, earth-abundant nonprecious metal catalyst. A range of aromatic and aliphatic nitriles and ketones were efficiently converted into primary amines and alcohols, respectively, in good to excellent yields. The hydrogenation of nitriles proceeds at 100 °C with catalyst loading of 2 mol % and 20 mol % base (t-BuOK), while the hydrogenation of ketones takes place already at 50 °C, with a catalyst loading of 1 mol % and 5 mol % of base. In both cases, a hydrogen pressure of 50 bar was applied.
- Weber, Stefan,St?ger, Berthold,Kirchner, Karl
-
-
Read Online
- Preparation of a magnetic mesoporous Fe3O4-Pd@TiO2 photocatalyst for the efficient selective reduction of aromatic cyanides
-
Herein, a hierarchical magnetic mesoporous microsphere was successfully prepared as a photocatalyst via a simple and reproducible route. Typically, Pd nanoparticles (NPs) were evenly dispersed on the surface of a magnetic Fe3O4 microsphere and then coated with a porous anatase-TiO2 shell to form Fe3O4-Pd@TiO2. The core-shell structure could efficiently suppress the conglomeration of Pd NPs during the calcination process at high temperatures as well as the shedding of Pd during the catalytic reaction process in the liquid phase. The as-prepared photocatalyst was characterized by TEM, XRD, XPS, VSM, and N2 adsorption-desorption. Fe3O4-Pd@TiO2 exhibits high photocatalytic activity for the selective reduction of aromatic cyanides to aromatic primary amines in an acidic aqueous solution. Moreover, this magnetic photocatalyst could be easily recovered from the reaction mixture by an external magnet and reused five times without significant reduction in its activity. The superior photocatalytic efficiency of the proposed photocatalyst may be attributed to its high charge separation efficiency and charge transfer rate, which are caused by the Schottky junction and large interface area. The results indicate that the strategy of coating the active noble metal sites with a mesoporous semiconductor shell has a significant potential for application in metal-semiconductor-based photocatalytic reactions.
- Zhao, Ziming,Long, Yu,Luo, Sha,Wu, Wei,Ma, Jiantai
-
-
Read Online
- Zirconium-hydride-catalyzed site-selective hydroboration of amides for the synthesis of amines: Mechanism, scope, and application
-
Developing mild and efficient catalytic methods for the selective synthesis of amines is a longstanding research objective. In this respect, catalytic deoxygenative amide reduction has proven to be promising but challenging, as this approach necessitates selective C–O bond cleavage. Herein, we report the selective hydroboration of primary, secondary, and tertiary amides at room temperature catalyzed by an earth-abundant-metal catalyst, Zr-H, for accessing diverse amines. Various readily reducible functional groups, such as esters, alkynes, and alkenes, were well tolerated. Furthermore, the methodology was extended to the synthesis of bio- and drug-derived amines. Detailed mechanistic studies revealed a reaction pathway entailing aldehyde and amido complex formation via an unusual C–N bond cleavage-reformation process, followed by C–O bond cleavage.
- Han, Bo,Jiao, Haijun,Wu, Lipeng,Zhang, Jiong
-
p. 2059 - 2067
(2021/09/02)
-
- Deoxygenative hydroboration of primary, secondary, and tertiary amides: Catalyst-free synthesis of various substituted amines
-
Transformation of relatively less reactive functional groups under catalyst-free conditions is an interesting aspect and requires a typical protocol. Herein, we report the synthesis of various primary, secondary, and tertiary amines through hydroboration of amides using pinacolborane under catalyst-free and solvent-free conditions. The deoxygenative hydroboration of primary and secondary amides proceeded with excellent conversions. The comparatively less reactive tertiary amides were also converted to the corresponding N,N-diamines in moderate yields under catalyst-free conditions, although alcohols were obtained as a minor product.
- An, Duk Keun,Jaladi, Ashok Kumar,Kim, Hyun Tae,Yi, Jaeeun
-
-
- Cobalt-Catalyzed Hydrogenative Transformation of Nitriles
-
Here, we report the transformation of nitrile compounds in a hydrogen atmosphere. Catalyzed by a cobalt/tetraphosphine complex, hydrogenative coupling of unprotected indoles with nitriles proceeds smoothly in a basic medium, yielding C3 alkylated indoles. In addition, the direct hydrogenation of nitriles under the same conditions yielded primary amines. Isotope labeling experiments, along with a series of control experiments, revealed a reaction pathway that involves nucleophilic addition of indoles and 1,4-reduction of a conjugate imine intermediate. Different from reductive alkylation of indoles under an acidic condition, E1cB elimination is believed to occur in this base-promoted hydrogenative coupling reaction.
- Zhang, Shaoke,Duan, Ya-Nan,Qian, Yu,Tang, Wenyue,Zhang, Runtong,Wen, Jialin,Zhang, Xumu
-
p. 13761 - 13767
(2021/11/17)
-
- Method for preparing primary amine by catalytically reducing nitrile compounds through nano-porous palladium catalyst
-
The invention belongs to the technical field of heterogeneous catalysis, and provides a method for preparing primary amine by catalytically reducing nitrile compounds with a nano-porous palladium catalyst. According to the invention, aromatic and aliphatic nitrile compounds are adopted as raw materials, nano-porous palladium is adopted as a catalyst, ammonia borane is adopted as a hydrogen source, no additional additive is added, and selective hydrogenation is performed to prepare the corresponding primary amine. The method provided by the invention has the beneficial effects of mild reaction conditions, no additive, environmental protection, no need of hydrogen, simple operation, stable hydrogen source, safety, harmlessness, high conversion rate, high selectivity and good catalyst stability, and makes industrialization possible.
- -
-
Paragraph 0065-0068
(2021/05/29)
-
- Reaction of Diisobutylaluminum Borohydride, a Binary Hydride, with Selected Organic Compounds Containing Representative Functional Groups
-
The binary hydride, diisobutylaluminum borohydride [(iBu)2AlBH4], synthesized from diisobutylaluminum hydride (DIBAL) and borane dimethyl sulfide (BMS) has shown great potential in reducing a variety of organic functional groups. This unique binary hydride, (iBu)2AlBH4, is readily synthesized, versatile, and simple to use. Aldehydes, ketones, esters, and epoxides are reduced very fast to the corresponding alcohols in essentially quantitative yields. This binary hydride can reduce tertiary amides rapidly to the corresponding amines at 25 °C in an efficient manner. Furthermore, nitriles are converted into the corresponding amines in essentially quantitative yields. These reactions occur under ambient conditions and are completed in an hour or less. The reduction products are isolated through a simple acid-base extraction and without the use of column chromatography. Further investigation showed that (iBu)2AlBH4 has the potential to be a selective hydride donor as shown through a series of competitive reactions. Similarities and differences between (iBu)2AlBH4, DIBAL, and BMS are discussed.
- Amberchan, Gabriella,Snelling, Rachel A.,Moya, Enrique,Landi, Madison,Lutz, Kyle,Gatihi, Roxanne,Singaram, Bakthan
-
supporting information
p. 6207 - 6227
(2021/05/06)
-
- Self-regulated catalysis for the selective synthesis of primary amines from carbonyl compounds
-
Most current processes for the general synthesis of primary amines by reductive amination are performed with enormously excessive amounts of hazardous ammonia. It remains unclear how catalysts should be designed to regulate amination reaction dynamics at a low ammonia-to-substrate ratio for the quantitative synthesis of primary amines from the corresponding carbonyl compounds. Herein we show a facile control of the reaction selectivity in the layered boron nitride supported ruthenium catalyzed reductive amination reaction. Specifically, locating ruthenium to the edge surface of layered boron nitride leads to an increased hydrogenation activity owing to the enhanced interfacial electronic effects between ruthenium and the edge surface of boron nitride. This enables self-accelerated reductive amination reactions which quantitatively synthesize structurally diverse primary amines by reductive amination of carbonyl compounds with twofold ammonia. This journal is
- Fan, Xiaomeng,Gao, Jin,Gao, Mingxia,Jia, Xiuquan,Ma, Jiping,Xu, Jie
-
supporting information
p. 7115 - 7121
(2021/09/28)
-
- Comparative account of catalytic activity of Ru- and Ni-based nanocomposites towards reductive amination of biomass derived molecules
-
This work includes an effective comparison of metallic ruthenium and nickel nanoparticles loaded on montmorillonite clay (MMT) for reductive amination reaction of biomass-derived molecules. It comprises an eco-friendly reaction using water as a solvent, utilizing molecular hydrogen and liquor ammonia (25% aq. solution) for the synthesis of primary amines from bio-derived aldehydes within 3–10 h of reaction time. Various parameters such as temperature, hydrogen pressure, substrate/ammonia concentration ratio, and reaction time were optimized while comparing the selectivity of primary amines for both catalysts. The applicability scope of these catalysts was explored with a library of aryl and heterocyclic aldehydes. The reductive amination of crude furfural extracted from biomass feedstock (rice husk) and pure xylose sugar was tested, showing yields in the range of 11–36%, to show the wider industrial scope of both nanocomposites. Gram scale conversion was also carried out to showcase the bulk scalability of the Ru/MMT catalyst.
- Bhanage, Bhalchandra M.,Gokhale, Tejas A.,Raut, Amol B.
-
-
- Simplified preparation of a graphene-co-shelled Ni/NiO@C nano-catalyst and its application in theN-dimethylation synthesis of amines under mild conditions
-
The development of Earth-abundant, reusable and non-toxic heterogeneous catalysts to be applied in the pharmaceutical industry for bio-active relevant compound synthesis remains an important goal of general chemical research.N-methylated compounds, as one of the most essential bioactive compounds, have been widely used in the fine and bulk chemical industries for the production of high-value chemicals. Herein, an environmentally friendly and simplified method for the preparation of graphene encapsulated Ni/NiO nanoalloy catalysts (Ni/NiO@C) was developed for the first time, for the highly selective synthesis ofN-methylated compounds using various functional amines and aldehydes under easy to handle, and industrially applicable conditions. A large number of primary and secondary amines (more than 70 examples) could be converted to the correspondingN,N-dimethylamines with the participation of different functional aldehydes, with an average yield of over 95%. A gram-scale synthesis also demonstrated a similar yield when compared with the benchmark test. In addition, it was further proved that the catalyst could easily be recycled because of its intrinsic magnetism and reused up to 10 times without losing its activity and selectivity. Also, for the first time, the tandem synthesis ofN,N-dimethylamine products in a one-pot process, using only a single earth-abundant metal catalyst, whose activity and selectivity were more than 99% and 94%, respectively, for all tested substrates, was developed. Overall, the advantages of this newly developed method include operational simplicity, high stability, easy recyclability, cost-effectiveness of the catalyst, and good functional group compatibility for the synthesis ofN-methylation products as well as the industrially applicable tandem synthesis process.
- Liu, Jianguo,Ma, Longlong,Song, Yanpei,Zhang, Mingyue,Zhuang, Xiuzheng
-
supporting information
p. 4604 - 4617
(2021/06/30)
-
- Metal-Organic Framework-Confined Single-Site Base-Metal Catalyst for Chemoselective Hydrodeoxygenation of Carbonyls and Alcohols
-
Chemoselective deoxygenation of carbonyls and alcohols using hydrogen by heterogeneous base-metal catalysts is crucial for the sustainable production of fine chemicals and biofuels. We report an aluminum metal-organic framework (DUT-5) node support cobalt(II) hydride, which is a highly chemoselective and recyclable heterogeneous catalyst for deoxygenation of a range of aromatic and aliphatic ketones, aldehydes, and primary and secondary alcohols, including biomass-derived substrates under 1 bar H2. The single-site cobalt catalyst (DUT-5-CoH) was easily prepared by postsynthetic metalation of the secondary building units (SBUs) of DUT-5 with CoCl2 followed by the reaction of NaEt3BH. X-ray photoelectron spectroscopy and X-ray absorption near-edge spectroscopy (XANES) indicated the presence of CoII and AlIII centers in DUT-5-CoH and DUT-5-Co after catalysis. The coordination environment of the cobalt center of DUT-5-Co before and after catalysis was established by extended X-ray fine structure spectroscopy (EXAFS) and density functional theory. The kinetic and computational data suggest reversible carbonyl coordination to cobalt preceding the turnover-limiting step, which involves 1,2-insertion of the coordinated carbonyl into the cobalt-hydride bond. The unique coordination environment of the cobalt ion ligated by oxo-nodes within the porous framework and the rate independency on the pressure of H2 allow the deoxygenation reactions chemoselectively under ambient hydrogen pressure.
- Antil, Neha,Kumar, Ajay,Akhtar, Naved,Newar, Rajashree,Begum, Wahida,Manna, Kuntal
-
supporting information
p. 9029 - 9039
(2021/06/28)
-
- Development and Application of Efficient Ag-based Hydrogenation Catalysts Prepared from Rice Husk Waste
-
The development of strategies for the sustainable management and valorization of agricultural waste is of outmost importance. With this in mind, we report the use of rice husk (RH) as feedstock for the preparation of heterogeneous catalysts for hydrogenation reactions. The catalysts were prepared by impregnating the milled RH with a silver nitrate solution followed by carbothermal reduction. The composition and morphology of the prepared catalysts were fully assessed by IR, AAS, ICP-MS, XPS, XRD and STEM techniques. This novel bio-genic silver-based catalysts showed excellent activity and remarkable selectivity in the hydrogenation of nitro groups in both aromatic and aliphatic substrates, even in the presence of reactive functionalities like halogens, carbonyls, borate esters or nitriles. Recycling experiments showed that the catalysts can be easily recovered and reused multiple times without significant drop in performance and without requiring re-activation.
- Unglaube, Felix,Kreyenschulte, Carsten Robert,Mejía, Esteban
-
p. 2583 - 2591
(2021/04/09)
-
- Nitrile Synthesis by Aerobic Oxidation of Primary Amines and in situ Generated Imines from Aldehydes and Ammonium Salt with Grubbs Catalyst
-
Herein, a Grubbs-catalyzed route for the synthesis of nitriles via the aerobic oxidation of primary amines is reported. This reaction accommodates a variety of substrates, including simple primary amines, sterically hindered β,β-disubstituted amines, allylamine, benzylamines, and α-amino esters. Reaction compatibility with various functionalities is also noted, particularly with alkenes, alkynes, halogens, esters, silyl ethers, and free hydroxyl groups. The nitriles were also synthesized via the oxidation of imines generated from aldehydes and NH4OAc in situ. (Figure presented.).
- Utsumi, Tatsuki,Noda, Kenta,Kawauchi, Daichi,Ueda, Hirofumi,Tokuyama, Hidetoshi
-
supporting information
p. 3583 - 3588
(2020/08/05)
-
- Nickel(ii) and nickel(0) complexes as precursors of nickel nanoparticles for the catalytic hydrogenation of benzonitrile
-
The use of the nickel(ii) complex [(TEEDA)NiCl2] (1; TEEDA= N,N,N′,N′-tetraethyl-ethylendiamine) and nickel(0) complex [Ni(COD)2] (5) as pre-catalysts in the additive-free catalytic hydrogenation of benzonitrile (BN) is reported. In the presence of 1 (1 mol%), BN was hydrogenated under relatively mild reaction conditions (100 °C, 120 psi H2, 72 h) to the corresponding secondary imine, N-benzylidenebenzylamine (BBA), in very good yield (83%). As a counterpart, 5 (1 mol%) selectively hydrogenated BN to benzylamine (BA) in excellent yield (96%) under similar reaction conditions (80 °C, 120 psi H2, 24 h). In both cases, nickel nanoparticles (Ni-NPs) were identified as the catalytically active species. These Ni-NPs were formed in situ from 1 and 5 without external additives or additional stabilizers. The use of complex 5 was extended to the hydrogenation of different (hetero) aromatic and aliphatic nitriles.
- Rodríguez, Alejandro A.,Gardu?o, Jorge A.,García, Juventino J.
-
p. 1082 - 1089
(2020/01/31)
-
- Manganese catalyzed selective hydrogenation of cyclic imides to diols and amines
-
Herein we report the selective hydrogenation of cyclic imides to diols and amines, homogeneously catalyzed for the first time by a complex of an earth-abundant metal, a manganese pincer complex. A plausible catalytic cycle is proposed based on informative mechanistic experiments.
- Das, Uttam Kumar,Janes, Trevor,Kumar, Amit,Milstein, David
-
supporting information
p. 3079 - 3082
(2020/06/19)
-
- General and selective synthesis of primary amines using Ni-based homogeneous catalysts
-
The development of base metal catalysts for industrially relevant amination and hydrogenation reactions by applying abundant and atom economical reagents continues to be important for the cost-effective and sustainable synthesis of amines which represent highly essential chemicals. In particular, the synthesis of primary amines is of central importance because these compounds serve as key precursors and central intermediates to produce value-added fine and bulk chemicals as well as pharmaceuticals, agrochemicals and materials. Here we report a Ni-triphos complex as the first Ni-based homogeneous catalyst for both reductive amination of carbonyl compounds with ammonia and hydrogenation of nitroarenes to prepare all kinds of primary amines. Remarkably, this Ni-complex enabled the synthesis of functionalized and structurally diverse benzylic, heterocyclic and aliphatic linear and branched primary amines as well as aromatic primary amines starting from inexpensive and easily accessible carbonyl compounds (aldehydes and ketones) and nitroarenes using ammonia and molecular hydrogen. This Ni-catalyzed reductive amination methodology has been applied for the amination of more complex pharmaceuticals and steroid derivatives. Detailed DFT computations have been performed for the Ni-triphos based reductive amination reaction, and they revealed that the overall reaction has an inner-sphere mechanism with H2metathesis as the rate-determining step.
- Beller, Matthias,Chandrashekhar, Vishwas G.,Jagadeesh, Rajenahally V.,Jiao, Haijun,Murugesan, Kathiravan,Wei, Zhihong
-
p. 4332 - 4339
(2020/05/18)
-
- Ultra-small cobalt nanoparticles from molecularly-defined Co-salen complexes for catalytic synthesis of amines
-
We report the synthesis of in situ generated cobalt nanoparticles from molecularly defined complexes as efficient and selective catalysts for reductive amination reactions. In the presence of ammonia and hydrogen, cobalt-salen complexes such as cobalt(ii)-N,N′-bis(salicylidene)-1,2-phenylenediamine produce ultra-small (2-4 nm) cobalt-nanoparticles embedded in a carbon-nitrogen framework. The resulting materials constitute stable, reusable and magnetically separable catalysts, which enable the synthesis of linear and branched benzylic, heterocyclic and aliphatic primary amines from carbonyl compounds and ammonia. The isolated nanoparticles also represent excellent catalysts for the synthesis of primary, secondary as well as tertiary amines including biologically relevant N-methyl amines.
- Beller, Matthias,Chandrashekhar, Vishwas G.,Gawande, Manoj B.,Jagadeesh, Rajenahally V.,Kalevaru, Narayana V.,Kamer, Paul C. J.,Senthamarai, Thirusangumurugan,Zbo?il, Radek
-
p. 2973 - 2981
(2020/03/27)
-
- Method for preparing primary amine by catalyzing reductive amination of aldehyde ketone compounds
-
The invention discloses a method for preparing primary amine by catalyzing reductive amination of aldehyde ketone compounds. The method comprises the following steps: 1) mixing nickel nitrate hexahydrate, citric acid and an organic solvent, carrying out heating and stirring until a colloidal material is obtained, drying the colloidal material, roasting the colloidal material in a protective atmosphere, pickling, washing and drying a roasted product, and performing a partial oxidation reaction on a dried product in an oxygen-nitrogen mixed atmosphere to obtain a catalyst for a reductive amination reaction; and 2) mixing aldehyde or ketone compounds, a methanol solution of ammonia and the reductive amination reaction catalyst, introducing hydrogen, and carrying out a reductive amination reaction. The method has the advantages of high primary amine yield, high selectivity, wide aldehyde ketone substrate range, short reaction time, mild reaction conditions, low cost, greenness, economicalperformance and the like; the used reductive amination reaction catalyst can be recycled more than 10 times, and the catalytic activity of the catalyst is not obviously changed in gram-level reactions; and the method is suitable for large-scale application.
- -
-
Paragraph 0043-0044
(2020/05/30)
-
- The Synthesis of Primary Amines through Reductive Amination Employing an Iron Catalyst
-
The reductive amination of ketones and aldehydes by ammonia is a highly attractive method for the synthesis of primary amines. The use of catalysts, especially reusable catalysts, based on earth-abundant metals is similarly appealing. Here, the iron-catalyzed synthesis of primary amines through reductive amination was realized. A broad scope and a very good tolerance of functional groups were observed. Ketones, including purely aliphatic ones, aryl–alkyl, dialkyl, and heterocyclic, as well as aldehydes could be converted smoothly into their corresponding primary amines. In addition, the amination of pharmaceuticals, bioactive compounds, and natural products was demonstrated. Many functional groups, such as hydroxy, methoxy, dioxol, sulfonyl, and boronate ester substituents, were tolerated. The catalyst is easy to handle, selective, and reusable and ammonia dissolved in water could be employed as the nitrogen source. The key is the use of a specific Fe complex for the catalyst synthesis and an N-doped SiC material as catalyst support.
- B?umler, Christoph,Bauer, Christof,Kempe, Rhett
-
p. 3110 - 3114
(2020/06/01)
-
- Facile synthesis of controllable graphene-co-shelled reusable Ni/NiO nanoparticles and their application in the synthesis of amines under mild conditions
-
The primary objective of many researchers in chemical synthesis is the development of recyclable and easily accessible catalysts. These catalysts should preferably be made from Earth-abundant metals and have the ability to be utilised in the synthesis of pharmaceutically important compounds. Amines are classified as privileged compounds, and are used extensively in the fine and bulk chemical industries, as well as in pharmaceutical and materials research. In many laboratories and in industry, transition metal catalysed reductive amination of carbonyl compounds is performed using predominantly ammonia and H2. However, these reactions usually require precious metal-based catalysts or RANEY nickel, and require harsh reaction conditions and yield low selectivity for the desired products. Herein, we describe a simple and environmentally friendly method for the preparation of thin graphene spheres that encapsulate uniform Ni/NiO nanoalloy catalysts (Ni/NiO?C) using nickel citrate as the precursor. The resulting catalysts are stable and reusable and were successfully used for the synthesis of primary, secondary, tertiary, and N-methylamines (more than 62 examples). The reaction couples easily accessible carbonyl compounds (aldehydes and ketones) with ammonia, amines, and H2 under very mild industrially viable and scalable conditions (80 °C and 1 MPa H2 pressure, 4 h), offering cost-effective access to numerous functionalized, structurally diverse linear and branched benzylic, heterocyclic, and aliphatic amines including drugs and steroid derivatives. We have also demonstrated the scale-up of the heterogeneous amination protocol to gram-scale synthesis. Furthermore, the catalyst can be immobilized on a magnetic stirring bar and be conveniently recycled up to five times without any significant loss of catalytic activity and selectivity for the product.
- Cui, Zhibing,Liu, Jianguo,Liu, Qiying,Ma, Longlong,Singh, Thishana,Wang, Chenguang,Wang, Nan,Zhu, Yuting
-
supporting information
p. 7387 - 7397
(2020/11/19)
-
- COMBINATION TREATMENTS COMPRISING ADMINISTRATION OF 1H-PYRAZOLO[4,3-B]PYRIDINES
-
The present invention provides 1H-pyrazolo[4,3-b]pyridin-7-amines of formula (I) as PDE1 inhibitors together with a second compound useful in the treatment of a neurodegenerative disorder and their combined use as a medicament, in particular for the treatment of neurodegenerative and/or cognitive disorders.
- -
-
Page/Page column 110
(2019/07/19)
-
- 1H-PYRAZOLO[4,3-B]PYRIDINES AS PDE1 INHIBITORS
-
The present invention provides 1H-pyrazolo[4,3-b]pyridines of formula (I) as PDE1 inhibitors and their use as a medicament, in particular for the treatment of neurodegenerative disorders and psychiatric disorders.
- -
-
Paragraph 0516-0517
(2019/07/10)
-
- COMBINATION TREATMENTS COMPRISING ADMINISTRATION OF 1H-PYRAZOLO[4,3-B]PYRIDINES
-
The present invention provides 1H-pyrazolo[4,3-b]pyridin-7-amines of formula (I) as PDE1 inhibitors together with a second compound which compound is useful in the treatment of a psychiatric disorder and their combined use as a medicament, in particular for the treatment of psychiatric and/or cognitive disorders.
- -
-
Page/Page column 107
(2019/07/19)
-
- Method for preparing substituted primary aliphatic amine
-
The invention belongs to the fields of medicinal and natural compound chemical intermediates and related chemical technologies, and relates to a preparation method of substituted primary amine. The method adopts benzonitrile and its derivative as raw materials, takes nanoporous palladium as a catalyst, takes hydrogen as a hydrogen source, and performs selective hydrogenation to prepare the substituted primary amine. The molar concentration of benzonitrile and its derivative in a solvent is 0.01-2 mmol/mL, and the molar ratio of benzonitrile and its derivative to the catalyst is 1:0.01-1:0.5; the size pore skeleton of the nanoporous palladium is 1 nm to 50 nm; and the pressure of hydrogen gas is 0.1 to 20.0 MPa. The method has the beneficial effects that the obtained product has high selectivity, the reaction condition is very mild, no additives is needed, the operation and the post-treatment are simple, the catalyst reproducibility is good, the multi-time catalytic effect with repeateduse is not significantly reduced, and the method provides possibility for industrialization.
- -
-
Paragraph 0032-0039
(2019/01/21)
-
- Method for preparing primary amines through hydrogen transfer selective nitrile reduction
-
The invention discloses a method for preparing primary amines through hydrogen transfer selective nitrile reduction. The method includes the step of adding low-price copper, iron and other metal saltsor low-price easy-to-obtain iodine elementary substances as additives with a nitrile compound as the raw material and oxazole borane as the hydrogen transfer agent under the mild conditions, therebypromoting the hydrogen transfer reaction and selectively synthesizing a series of corresponding primary amines under different conditions respectively. The high yield and high selectivity are achievedin the reaction. The oxazole borane is obtained through reaction of alkamine and a tetrahydrofuran complex of borane. In addition, the method is mild in reaction condition, easy to operate, free of high-pressure devices, environmentally friendly and high in raw material general applicability, the agents required for the reaction are all low in price and easy to obtain, the reduction product is only primary amines, and selectivity and repeatability are high. Thus, an effective scheme is provided for the industrial production of other high-additional-value compounds of similar structures in future.
- -
-
Paragraph 0037-0041
(2019/05/02)
-
- Nitrogen-Doped Carbon-Supported Nickel Nanoparticles: A Robust Catalyst to Bridge the Hydrogenation of Nitriles and the Reductive Amination of Carbonyl Compounds for the Synthesis of Primary Amines
-
An efficient method was developed for the synthesis of primary amines either from the hydrogenation of nitriles or reductive amination of carbonyl compounds. The reactions were catalyzed by nitrogen-doped mesoporous carbon (MC)-supported nickel nanoparticles (abbreviated as MC/Ni). The MC/Ni catalyst demonstrated high catalytic activity for the hydrogenation of nitriles into primary amines in high yields (81.9–99 %) under mild reaction conditions (80 °C and 2.5 bar H2). The MC/Ni catalyst also promoted the reductive amination of carbonyl compounds for the synthesis of primary amines at 80 °C and 1 bar H2. The hydrogenation of nitriles and the reductive amination proceeded through the same intermediates for the generation of the primary amines. To the best of our knowledge, no other heterogeneous non-noble metal catalysts have been reported for the synthesis of primary amines under mild conditions, both from the hydrogenation of nitriles and reductive amination.
- Zhang, Yangmin,Yang, Hanmin,Chi, Quan,Zhang, Zehui
-
p. 1246 - 1255
(2019/03/07)
-
- Mild palladium-catalysed highly efficient hydrogenation of CN, C-NO2, and CO bonds using H2 of 1 atm in H2O
-
Here we present the first example of a mild and high-efficiency protocol enabling a process in water using 1 atm of H2 for the efficient and selective hydrogenation of nitriles, nitro compounds, ketones, and aldehydes to yield primary amines and alcohols with satisfactory yields of up to >99%. Several palladium-based nanoparticle catalysts were prepared from K2PdCl4 and ligands, and one of them was found to be the best and most suitable for the hydrogenation of CN, C-NO2, and CO bonds. In addition, the catalyst Pd-NPs can be easily recycled and reused without losing their activity and selectivity. A plausible mechanism for the hydrogenation of a CN bond was also proposed, representing the first example that possesses great potential for sustainable industrial purposes.
- Liu, Yaxu,He, Shaopo,Quan, Ziyi,Cai, Huizhuo,Zhao, Yang,Wang, Bo
-
supporting information
p. 830 - 838
(2019/02/27)
-
- A ppm level Rh-based composite as an ecofriendly catalyst for transfer hydrogenation of nitriles: Triple guarantee of selectivity for primary amines
-
Hydrogenation of nitriles to afford amines under mild conditions is a challenging task with an inexpensive heterogeneous catalyst, and it is even more difficult to obtain primary amines selectively because of the accompanying self-coupling side reactions. An efficient catalytic system was designed as Fe3O4@nSiO2-NH2-RhCu@mSiO2 to prepare primary amines through the transfer hydrogenation of nitrile compounds with economical HCOOH as the hydrogen donor. The loading of rhodium in the catalyst could be at the ppm level, and the TOF reaches 6803 h-1 for Rh. This catalytic system has a wide substrate range including some nitriles that could not proceed in the previous literature. The experimental results demonstrate that the excellent selectivity for primary amines is guaranteed by three tactics, which are the strong active site, the inhibition of side products by the hydrogen source and the special pore structure of the catalyst. In addition, the catalyst could be reused ten times without activity loss through convenient magnetic recovery.
- Liu, Lei,Li, Jifan,Ai, Yongjian,Liu, Yuhong,Xiong, Jialiang,Wang, Hongdong,Qiao, Yijun,Liu, Wenrui,Tan, Shanchao,Feng, Shaofei,Wang, Kunpeng,Sun, Hongbin,Liang, Qionglin
-
p. 1390 - 1395
(2019/03/26)
-
- Continuous-Flow Hydrogenation and Reductive Deuteration of Nitriles: a Simple Access to α,α-Dideutero Amines
-
A simple and efficient continuous flow methodology has been developed for hydrogenation and reductive deuteration of nitriles to yield primary amines and also valuable α,α-dideutero analogues. Raney nickel proved to be a useful catalyst for the transformation of a wide range of nitriles under reasonably mild conditions with excellent deuterium incorporation (>90 %) and quantitative conversion. Among known model compounds, three new deuterated primary amines were prepared. The large-scale synthesis of deuterated tryptamine was also carried out to deliver 1.1 g product under flow conditions.
- Mészáros, Rebeka,Peng, Bai-Jing,?tv?s, Sándor B.,Yang, Shyh-Chyun,Fül?p, Ferenc
-
p. 1508 - 1511
(2019/11/03)
-
- Old Concepts, New Application – Additive-Free Hydrogenation of Nitriles Catalyzed by an Air Stable Alkyl Mn(I) Complex
-
An efficient additive-free manganese-catalyzed hydrogenation of nitriles to primary amines with molecular hydrogen is described. The pre-catalyst, a well-defined bench-stable alkyl bisphosphine Mn(I) complex fac-[Mn(dpre)(CO)3(CH3)] (dpre=1,2-bis(di-n-propylphosphino)ethane), undergoes CO migratory insertion into the manganese-alkyl bond to form acyl complexes which upon hydrogenolysis yields the active coordinatively unsaturated Mn(I) hydride catalyst [Mn(dpre)(CO)2(H)]. A range of aromatic and aliphatic nitriles were efficiently and selectively converted into primary amines in good to excellent yields. The hydrogenation of nitriles proceeds at 100 °C with a catalyst loading of 2 mol % and a hydrogen pressure of 50 bar. Mechanistic insights are provided by means of DFT calculations. (Figure presented.).
- Weber, Stefan,Veiros, Luis F.,Kirchner, Karl
-
p. 5412 - 5420
(2019/11/13)
-
- Manganese catalyzed hydrogenation of carbamates and urea derivatives
-
We report the hydrogenation of carbamates and urea derivatives, two of the most challenging carbonyl compounds to be hydrogenated, catalyzed for the first time by a complex of an earth-abundant metal. The hydrogenation reaction of these CO2-derived compounds, catalyzed by a manganese pincer complex, yields methanol in addition to amine and alcohol, which makes this methodology a sustainable alternative route for the conversion of CO2 to methanol, involving a base-metal catalyst. Moreover, the hydrogenation proceeds under mild pressure (20 bar). Our observations support a hydrogenation mechanism involving the Mn-H complex. A plausible catalytic cycle is proposed based on informative mechanistic experiments.
- Das, Uttam Kumar,Kumar, Amit,Ben-David, Yehoshoa,Iron, Mark A.,Milstein, David
-
supporting information
p. 12962 - 12966
(2019/08/26)
-
- Preparation of nitrogen-doped carbon supported cobalt catalysts and its application in the reductive amination
-
The use of non-noble metal catalysts with high activity is of great importance for organic transformations. Herein, nitrogen-doped carbon supported cobalt catalysts with high surface area up to 981.2 m2/g were prepared via the simple pyrolysis of cobalt coordinated organic polymers with silica as the hard template. The pyrolysis temperature showed a great effect on the structure and properties of the as-prepared catalysts. The Co@NC-800 catalyst with the pyrolysis temperature of 800 °C demonstrated a high activity for the selective reductive amination of carbonyl compounds to primary amines with ammonia and hydrogen. Structurally-diverse primary amines with yields in the range from 81.8% to 100% were attained under the optimal conditions. The Co@NC-800 catalyst could be reused without the loss of its activity. The Co@NC-800 catalyst demonstrated comparable activity as the reported heterogeneous noble metal catalysts.
- Yuan, Ziliang,Liu, Bing,Zhou, Peng,Zhang, Zehui,Chi, Quan
-
p. 347 - 356
(2019/01/24)
-
- Reusable Nickel Nanoparticles-Catalyzed Reductive Amination for Selective Synthesis of Primary Amines
-
The preparation of nickel nanoparticles as efficient reductive amination catalysts by pyrolysis of in situ generated Ni-tartaric acid complex on silica is presented. The resulting stable and reusable Ni-nanocatalyst enables the synthesis of functionalized and structurally diverse primary benzylic, heterocyclic and aliphatic amines starting from inexpensive and readily available carbonyl compounds and ammonia in presence of molecular hydrogen. Applying this Ni-based amination protocol, -NH2 moiety can be introduced in structurally complex compounds, for example, steroid derivatives and pharmaceuticals.
- Murugesan, Kathiravan,Beller, Matthias,Jagadeesh, Rajenahally V.
-
supporting information
p. 5064 - 5068
(2019/03/19)
-
- Platinum-(phosphinito-phosphinous acid) complexes as bi-talented catalysts for oxidative fragmentation of piperidinols: An entry to primary amines
-
Platinum-(phosphinito-phosphinous acid) complex catalyzes the oxidative fragmentation of hindered piperidinols according to a hydrogen transfer induced methodology. This catalyst acts successively as both a hydrogen carrier and soft Lewis acid in a one pot-two steps process. This method can be applied to the synthesis of a wide variety of primary amines in a pure form by a simple acid-base extraction without further purification.
- Membrat, Romain,Vasseur, Alexandre,Moraleda, Delphine,Michaud-Chevallier, Sabine,Martinez, Alexandre,Giordano, Laurent,Nuel, Didier
-
p. 37825 - 37829
(2019/12/03)
-
- Nano-Fe3O4@SiO2-SO3H: A magnetic, reusable solid-acid catalyst for solvent-free reduction of oximes to amines with the NaBH3CN/ZrCl4 system
-
In this study, the immobilization of sulfonic acid on silica-layered magnetite was carried out by the reaction of ClSO3H with silica-layered magnetite. The prepared magnetic nanoparticles of Fe3O4@SiO2-SO3H were then characterized using scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, vibrating sample magnetometry, and transmission electron microscopy. The sulfonated nanocomposite exhibited excellent catalytic activity and reusability in the reduction of various aldoximes and ketoximes with NaBH3CN in the presence of ZrCl4. All reactions were carried out under solvent-free conditions (r.t. or 75–80°C) within 3–70 min to afford amines in high to excellent yields.
- Sadighnia, Leila,Zeynizadeh, Behzad,Karami, Shiva,Abdollahi, Mohammad
-
p. 535 - 542
(2019/01/04)
-
- Ruthenium(II)-cored supramolecular organic framework-mediated recyclable visible light photoreduction of azides to amines and cascade formation of lactams
-
Ru(bpy)3]2+-cored supramolecular organic framework SMOF-1, assembled from a [Ru(bpy)3]2+-derived hexaarmed molecule and cucurbit[8]uril, has been demonstrated to heterogeneously catalyze visible light-induced reduction of phenyl, benzyl, 2-phenylethyl and 3-phenylpropyl azides in acetonitrile to produce the corresponding amines in good to high yields. For the last two kinds of azides that bear a CO2Me group at the para-position of the benzene ring, cascade reactions take place to generate the corresponding lactams in high yields. Compared with homogeneous control [Ru(bpy)3]Cl2, SMOF-1 exhibits remarkably increased photocatalysis activity as a result of synergistic effect of the [Ru(bpy)3]2+ units that form cubic cages to host the azide molecules and related intermediates. Moreover, SMOF-1 displays high recyclability and considerable photocatalysis activity after 3 to 12 runs.
- Wu, Yi-Peng,Yan, Meng,Gao, Zhong-Zheng,Hou, Jun-Li,Wang, Hui,Zhang, Dan-Wei,Zhang, Junliang,Li, Zhan-Ting
-
p. 1383 - 1386
(2019/05/06)
-
- 1H-PYRAZOLO[4,3-B]PYRIDINES AS PDE1 INHIBITORS
-
The present invention provides 1H-pyrazolo[4,3-b]pyridin-7-amines of formula (I) as PDE1 inhibitors and their use as a medicament, in particular for the treatment of neurodegenerative disorders and psychiatric disorders.
- -
-
Page/Page column 101
(2018/09/25)
-
- Corresponding amine nitrile and method of manufacturing thereof
-
The invention relates to a manufacturing method of nitrile. Compared with the prior art, the manufacturing method has the characteristics of significantly reduced using amount of an ammonia source, low environmental pressure, low energy consumption, low production cost, high purity and yield of a nitrile product and the like, and nitrile with a more complex structure can be obtained. The invention also relates to a method for manufacturing corresponding amine from nitrile.
- -
-
-
- Cobalt-based nanoparticles prepared from MOF-carbon templates as efficient hydrogenation catalysts
-
The development of efficient and selective nanostructured catalysts for industrially relevant hydrogenation reactions continues to be an actual goal of chemical research. In particular, the hydrogenation of nitriles and nitroarenes is of importance for the production of primary amines, which constitute essential feedstocks and key intermediates for advanced chemicals, life science molecules and materials. Herein, we report the preparation of graphene shell encapsulated Co3O4- and Co-nanoparticles supported on carbon by the template synthesis of cobalt-terephthalic acid MOF on carbon and subsequent pyrolysis. The resulting nanoparticles create stable and reusable catalysts for selective hydrogenation of functionalized and structurally diverse aromatic, heterocyclic and aliphatic nitriles, and as well as nitro compounds to primary amines (>65 examples). The synthetic and practical utility of this novel non-noble metal-based hydrogenation protocol is demonstrated by upscaling several reactions to multigram-scale and recycling of the catalyst.
- Murugesan, Kathiravan,Senthamarai, Thirusangumurugan,Sohail, Manzar,Alshammari, Ahmad S.,Pohl, Marga-Martina,Beller, Matthias,Jagadeesh, Rajenahally V.
-
p. 8553 - 8560
(2018/11/30)
-
- Chemo-selective reduction of nitro and nitrile compounds using Ni nanoparticles immobilized on hyperbranched polymer-functionalized magnetic nanoparticles
-
The nitro and nitrile groups in aromatic and aliphatic compounds containing various reducible substituents such as carboxylic acid, ketone, aldehyde and halogen are selectively reduced to the corresponding amines in water as a green solvent with excellent yields by employing NaBH4 in the presence of Fe3O4@PAMAM/Ni(0)-b-PEG nanocatalyst. The morphology and structural features of the catalyst were characterized using various microscopic and spectroscopic techniques. The designed catalyst system because of it being covered with hydrophilic polymers is soluble in a wide range of solvents (e.g. water and ethanol) and suitable for immobilizing and stabilizing Ni nanoparticles in aqueous mediums. In addition, the catalyst can be easily recovered from a reaction mixture by applying an external magnetic field and can be reused up to six runs without significant loss of activity.
- Tabatabaei Rezaei, Seyed Jamal,Mashhadi Malekzadeh, Asemeh,Poulaei, Sima,Ramazani, Ali,Khorramabadi, Hossein
-
-
- Highly Stable COF-Supported Co/Co(OH)2 Nanoparticles Heterogeneous Catalyst for Reduction of Nitrile/Nitro Compounds under Mild Conditions
-
Ordered nanoporosity in covalent organic framework (COF) offers excellent opportunity for property development. Loading nanoparticles (nPs) onto them is one approach to introducing tailor-made properties into a COF. Here, a COF–Co/Co(OH)2 composite containing about 16 wt% of 2 nPs is prepared on a N-rich COF support that catalyzes the release of theoretical equivalence of H2 from readily available, safe, and cheap NaBH4. Furthermore, the released H2 is utilized for the hydrogenation of nitrile and nitro compounds to amines under ambient conditions in a facile one-pot reaction. The COF “by choice” is built from “methoxy” functionalized dialdehydes which is crucial in enabling the complete retention of the COF structure under the conditions of the catalysis, where the regular Schiff bonds would have hydrolyzed. The N-rich binding pockets in the COF ensure strong nP–COF interactions, which provides stability and enables catalyst recycling. Modeling studies reveal the crucial role played by the COF in exposing the active facets and thereby in controlling the activation of the reducing agent. Additionally, via density functional theory, we provide a rational explanation for how these COFs can stabilize nanoparticles which grow beyond the limiting pore size of the COF and yet result in a truly stable heterogeneous catalyst – a ubiquitous observation. The study underscores the versatility of COF as a heterogeneous support for developing cheap and highly active nonnoble metal catalysts.
- Mullangi, Dinesh,Chakraborty, Debanjan,Pradeep, Anu,Koshti, Vijay,Vinod, Chathakudath P.,Panja, Soumendranath,Nair, Sunil,Vaidhyanathan, Ramanathan
-
-
- Synthesis of cobalt nanoparticles by pyrolysis of Vitamin B12: A non-noble-metal catalyst for efficient hydrogenation of nitriles
-
A facile preparation of vitamin B12-derived carbonaceous cobalt particles supported on ceria is reported. The resulting composite material is obtained upon wet impregnation of ceria with natural cyanocobalamin and consecutive pyrolysis under inert conditions. The novel catalyst shows good to excellent performance in the industrially relevant heterogeneous hydrogenation of nitriles to the corresponding primary amines.
- Ferraccioli, Raffaella,Borovika, Diana,Surkus, Annette-Enrica,Kreyenschulte, Carsten,Topf, Christoph,Beller, Matthias
-
p. 499 - 507
(2018/02/07)
-
- Selective Hydrogenation of Cyclic Imides to Diols and Amines and Its Application in the Development of a Liquid Organic Hydrogen Carrier
-
Direct hydrogenation of a broad variety of cyclic imides to diols and amines using a ruthenium catalyst is reported here. We have applied this strategy toward the development of a new liquid organic hydrogen carrier system based on the hydrogenation of bis-cyclic imide that is formed by the dehydrogenative coupling of 1,4-butanediol and ethylenediamine using a new ruthenium catalyst. The rechargeable system has a maximum gravimetric hydrogen storage capacity of 6.66 wt%.
- Kumar, Amit,Janes, Trevor,Espinosa-Jalapa, Noel Angel,Milstein, David
-
supporting information
p. 7453 - 7457
(2018/06/08)
-
- Cobalt complex, preparation method thereof, and application thereof in selective catalysis of transfer hydrogenation reaction of cyano group
-
The invention discloses a cobalt complex, a preparation method thereof, and an application thereof in the selective catalysis of a transfer hydrogenation reaction of a cyano group. The structural formula of the cobalt complex is represented by formula I. The cobalt complex is prepared through a reaction of a cobalt salt and an NNP ligand or a PNP ligand under the protection of an inert atmosphere;and the chemical formula of the cobalt salt is CoX12, wherein X1 represents halogen, a sulfate radical, a perchlorate radical, a hexafluorophosphate radical, a hexafluoroantimonate radical, a tetrafluoroborate radical, a trifluoromethanesulfonate radical or a tetra(pentafluorophenyl)borate radical. The cobalt complex can be used in the selective catalysis of the transfer hydrogenation reaction ofthe cyano group to obtain a primary amine compound, a secondary amine compound and a tertiary amine compound, the primary amine compound, the secondary amine compound and the tertiary amine compoundare important intermediates in a series of subsequent functionalizing reactions, and the cobalt complex has a very high catalysis activity, and has great research values and a great application prospect.
- -
-
Paragraph 0157-0160
(2018/05/07)
-
- Bioproduction of benzylamine from renewable feedstocks via a nine-step artificial enzyme cascade and engineered metabolic pathways
-
Production of chemicals from renewable feedstocks has been an important task for sustainable chemical industry. Although microbial fermentation has been widely employed to produce many biochemicals, it is still very challenging to access non-natural chemicals. Two methods (biotransformation and fermentation) have been developed for the first bio-derived synthesis of benzylamine, a commodity non-natural amine with broad applications. Firstly, a nine-step artificial enzyme cascade was designed by biocatalytic retrosynthetic analysis and engineered in recombinant E. coli LZ243. Biotransformation of l-phenylalanine (60 mm) with the E. coli cells produced benzylamine (42 mm) in 70 % conversion. Importantly, the cascade biotransformation was scaled up to 100 mL and benzylamine was successfully isolated in 57 % yield. Secondly, an artificial biosynthesis pathway to benzylamine from glucose was developed by combining the nine-step cascade with an enhanced l-phenylalanine synthesis pathway in cells. Fermentation with E. coli LZ249 gave benzylamine in 4.3 mm concentration from glucose. In addition, one-pot syntheses of several useful benzylamines from the easily available styrenes were achieved, representing a new type of alkene transformation by formal oxidative cleavage and reductive amination.
- Zhou, Yi,Wu, Shuke,Mao, Jiwei,Li, Zhi
-
p. 2221 - 2228
(2018/10/20)
-
- A benzylamine synthetic method of the compound (by machine translation)
-
The invention discloses a compound of formula (V) indicated by the benzylamine compound synthetic methods: shown in formula (IV) of the phenmethyl nitrine as raw materials, in the boron tribromide, solvent A and gas B under the protection of the reduction reaction, after the reaction, the solvent C quenching, after treatment [...] (V) indicated by the benzylamine compound. Compared with the existing method, the invention adopts the mild reaction conditions of boron tribromide reagent, avoid the use of a metal catalyst, the operation is simple, the reaction yield is high. (by machine translation)
- -
-
Paragraph 0032; 0033; 0034
(2018/09/11)
-
- Mechanochemical N-alkylation of imides
-
The mechanochemical N-alkylation of imide derivatives was studied. Reactions under solvent-free conditions in a ball mill gave good yields and could be put in place of the classical solution conditions. The method is general and can be applied to various imides and alkyl halides. Phthalimides prepared under ball milling conditions were used in a mechanochemical Gabriel synthesis of amines by their reaction with 1,2-diaminoethane.
- Bri?, Anamarija,Dud, Mateja,Margeti?, Davor
-
p. 1745 - 1752
(2017/09/27)
-
- Catalyst-Dependent Selective Hydrogenation of Nitriles: Selective Synthesis of Tertiary and Secondary Amines
-
In the presence of palladium on carbon (Pd/C) as a catalyst, hydrogenation of aliphatic nitriles in cyclohexane efficiently proceeded at 25-60 °C under ordinary hydrogen gas pressure to afford the corresponding tertiary amines. However, the use of rhodium on carbon (Rh/C) led to the highly selective generation of secondary amines. Hydrogenation of aromatic nitriles and cyclohexanecarbonitrile selectively produced secondary amines in the presence of either Pd/C or Rh/C.
- Monguchi, Yasunari,Mizuno, Masahiro,Ichikawa, Tomohiro,Fujita, Yuki,Murakami, Eri,Hattori, Tomohiro,Maegawa, Tomohiro,Sawama, Yoshinari,Sajiki, Hironao
-
p. 10939 - 10944
(2017/10/27)
-
- Low-Pressure Hydrogenation of Nitriles to Primary Amines Catalyzed by Ruthenium Pincer Complexes. Scope and mechanism
-
The catalytic hydrogenation of nitriles to primary amines constitutes an environmentally benign and atom-economical methodology in synthetic organic chemistry. However, selective hydrogenation can be challenging, and usually elevated pressure and the use of various additives is required. Herein the hydrogenation of aromatic and aliphatic nitriles to form primary amines catalyzed by ruthenium pincer complexes is described. The reactions are conducted at low H2 pressure, low catalytic loadings and, in case of a variety of benzonitriles, under neutral conditions and without any additives. Mechanistic insight is provided.
- Mukherjee, Arup,Srimani, Dipankar,Ben-David, Yehoshoa,Milstein, David
-
p. 559 - 563
(2017/02/26)
-