Welcome to LookChem.com Sign In|Join Free

CAS

  • or
2-(Bromomethyl)phenol, with the molecular formula C7H7BrO, is an organic compound characterized by a benzene ring with a hydroxyl group and a bromomethyl group attached to it. It is a versatile intermediate in the synthesis of various organic compounds, pharmaceuticals, and polymers.

58402-38-3

Post Buying Request

58402-38-3 Suppliers

Recommended suppliersmore

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

58402-38-3 Usage

Uses

Used in Pharmaceutical Industry:
2-(Bromomethyl)phenol is used as a key intermediate in the synthesis of pharmaceuticals for its ability to be incorporated into the molecular structures of various drugs, enhancing their therapeutic properties and effectiveness.
Used in Polymer Production:
In the polymer industry, 2-(Bromomethyl)phenol serves as a building block in the production of polymers, contributing to the development of materials with specific properties and applications.
Used in Organic Synthesis:
2-(Bromomethyl)phenol is utilized as a versatile starting material in the synthesis of other organic compounds, allowing for the creation of a wide range of chemical products.
However, it is important to note that 2-(Bromomethyl)phenol is considered a hazardous chemical and should be handled with care to minimize potential health and environmental hazards.

Check Digit Verification of cas no

The CAS Registry Mumber 58402-38-3 includes 8 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 5 digits, 5,8,4,0 and 2 respectively; the second part has 2 digits, 3 and 8 respectively.
Calculate Digit Verification of CAS Registry Number 58402-38:
(7*5)+(6*8)+(5*4)+(4*0)+(3*2)+(2*3)+(1*8)=123
123 % 10 = 3
So 58402-38-3 is a valid CAS Registry Number.

58402-38-3SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 20, 2017

Revision Date: Aug 20, 2017

1.Identification

1.1 GHS Product identifier

Product name 2-(BROMOMETHYL)PHENOL

1.2 Other means of identification

Product number -
Other names 2-bromomethylphenol

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:58402-38-3 SDS

58402-38-3Relevant articles and documents

Flash photolytic generation of ortho-quinone methide in aqueous solution and study of its chemistry in that medium

Chiang,Kresge,Zhu

, p. 8089 - 8094 (2001)

Flash photolysis of o-hydroxybenzyl alcohol, o-hydroxybenzyl p-cyanophenyl ether, and (o-hydroxybenzyl)trimethylammonium iodide in aqueous perchloric acid and sodium hydroxide solutions, and in acetic acid and biphosphate ion buffers, produced o-quinone methide as a short-lived transient species that underwent hydration back to benzyl alcohol in hydrogen-ion catalyzed (kH+ = 8.4 × 105 M-1 s-1) and hydroxideion catalyzed (kHO- 3.0 × 104 M-1 s-1) reactions as well as an uncatalyzed (kUC = 2.6 × 102 s-1) process. The hydrogen-ion catalyzed reaction gave the solvent isotope effect kH+/kD+ = 0.42, whose inverse nature indicates that this process occurs by rapid and reversible equilibrium protonation of the carbonyl oxygen atom of the quinone methide, followed by rate-determining capture of the carbocation so produced by water. The magnitude of the rate constant of the uncatalyzed reaction, on the other hand, indicates that this process occurs by simple nucleophilic addition of water to the methylene group of the quinone methide. Decay of the quinone methide is also accelerated by acetic acid buffers through both acid- and base-catalyzed pathways, and quantitative analysis of the reaction products formed in these solutions shows that this acceleration is caused by nucleophilic reactions of acetate ion rather than by acetate ion assisted hydration. Bromide and thiocyanate ions also accelerate decay of the quinone methide through both hydrogen-ion catalyzed and uncatalyzed pathways, and the inverse nature of solvent isotope effects on the hydrogen-ion catalyzed reactions shows that these reactions also occur by rapid equilibrium protonation of the quinone methide carbonyl oxygen followed by rate-determining nucleophilic capture of the ensuing carbocation. Assignment of an encounter-controlled value to the rate constant for the rate-determining step of the thiocyanate reaction leads to pKa = 1.7 for the acidity constant of the carbonyl-protonated quinone methide.

Synthesis, inhibition properties against xanthine oxidase and molecular docking studies of dimethyl N-benzyl-1H-1,2,3-triazole-4,5-dicarboxylate and (N-benzyl-1H-1,2,3-triazole-4,5-diyl)dimethanol derivatives

Yagiz, Güler,Noma, Samir Abbas Ali,Altundas, Aliye,Al-khafaji, Khattab,Taskin-Tok, Tugba,Ates, Burhan

, (2021/01/28)

This study focused on synthesis various dimethyl N-benzyl-1H-1,2,3-triazole-4,5-dicarboxylate and (N-benzyl-1H-1,2,3-triazole-4,5-diyl)dimethanol derivatives under the conditions of green chemistry without the use of solvent and catalysts. Their inhibition properties were also investigated on xanthine oxidase (XO) activity. All dimethanol and dicarboxylate derivatives exhibited significant inhibition activities with IC50 values ranging from 0.71 to 2.25 μM. Especially, (1-(3-bromobenzyl)-1H-1,2,3-triazole-4,5-diyl)dimethanol (5c) and dimethyl 1-(4-chlorobenzyl)-1H-1,2,3-triazole-4,5-dicarboxylate (6 g) compounds were found to be the most promising derivatives on the XO enzyme inhibition with IC50 values 0.71 and 0.73 μM, respectively. Moreover, the double docking procedure was to evaluate compound modes of inhibition and their interactions with the protein (XO) at atomic level. Surprisingly, the docking results showed a good correlation with IC50 [correlation coefficient (R2 = 0.7455)]. Also, the docking results exhibited that the 5c, 6f and 6 g have lowest docking scores ?4.790, ?4.755, and ?4.730, respectively. These data were in agreement with the IC50 values. These results give promising beginning stages to assist in the improvement of novel and powerful inhibitor against XO.

Clay-Supported Cu(II) Catalyst: An Efficient, Heterogeneous, and Recyclable Catalyst for Synthesis of 1,4-Disubstituted 1,2,3-Triazoles from Alloxan-Derived Terminal Alkyne and Substituted Azides Using Click Chemistry

Dubey, Nitin,Sharma, Pratibha,Kumar, Ashok

, p. 2608 - 2626 (2015/11/28)

A novel series of alloxan-derived 1,4-disubstituted 1,2,3-triazoles was synthesized in excellent yields under catalytic conditions using a click reaction strategy through 1,3-dipolar cycloaddition. Their structures have been ascertained on the basis of spectroanalytical and elemental analysis data. Synthesis of hybrid compounds with varying substitutions in the triazole ring was achieved by reaction between alloxan-derived terminal alkyne and a pertinent azide derivative in the presence of clay-Cu(II) as the catalyst in methanolic medium. Also, comparative evaluation of various catalytic systems [viz., CuI, CuSO4, CuI-zeolite, K10Ti, and clay-Cu(II)] was investigated. Of these catalytic systems, clay-Cu(II) was observed to be the best. The catalyst was recyclable for several runs without showing significant loss in its activity. The good selectivity, cost-efficiency, short reaction time, milder reaction conditions, and simple workup procedure are the added salient features of this synthetic protocol.

Substituent effects on oxidation-induced formation of quinone methides from arylboronic ester precursors

Cao, Sheng,Christiansen, Robin,Peng, Xiaohua

, p. 9050 - 9058 (2013/07/26)

A series of arylboronic esters containing different aromatic substituents and various benzylic leaving groups (Br or N+Me3Br -) have been synthesized. The substituent effects on their reactivity with H2O2 and formation of quinone methide (QM) have been investigated. NMR spectroscopy and ethyl vinyl ether (EVE) trapping experiments were used to determine the reaction mechanism and QM formation, respectively. QMs were not generated during oxidative cleavage of the boronic esters but by subsequent transformation of the phenol products under physiological conditions. The oxidative deboronation is facilitated by electron-withdrawing substituents, such as aromatic F, NO2, or benzylic N+Me 3Br-, whereas electron-donating substituents or a better leaving group favor QM generation. Compounds containing an aromatic CH 3 or OMe group, or a good leaving group (Br), efficiently generate QMs under physiological conditions. Finally, a quantitative relationship between the structure and activity has been established for the arylboronic esters by using a Hammett plot. The reactivity of the arylboronic acids/esters and the inhibition or facilitation of QM formation can now be predictably adjusted. This adjustment is important as some applications may benefit and others may be limited by QM generation. Tunable quinone methide formation: Aromatic substituents and the benzylic leaving group strongly affect the H 2O2-induced formation of quinone methides (QMs) from arylboronic esters (see scheme). The reactivity of arylboronic esters can be predictably adjusted by varying substituents. Copyright

Microwave-promoted, one-pot conversion of alkoxymethylated protected alcohols into their corresponding nitriles, bromides, and iodides using [bmim][InCl4] as a green catalyst

Mirjafari, Arsalan,Mohammadpoor-Baltork, Iraj,Moghadam, Majid,Tangestaninejad, Shahram,Mirkhani, Valiollah,Khosropour, Ahmad Reza

supporting information; experimental part, p. 3274 - 3276 (2010/07/18)

The Lewis acid room temperature ionic liquid, [bmim][InCl4], was found to be an efficient and green catalyst for the highly chemoselective and one-pot conversion of MOM- or EOM-ethers into their corresponding nitriles, bromides, and iodides under microwave irradiation. The procedures are simple, rapid, and high yielding. The catalyst exhibited a remarkable reactivity and is reusable.

A chemoselective, easy bromination of (hydroxymethyl)phenols

Nieddu, Giammario,De Luca, Lidia,Giacomelli, Giampaolo

experimental part, p. 3937 - 3940 (2009/05/26)

A simple and chemoselective method for direct bromination of (hydroxymethyl)phenols via reaction with 2,4,6-trichloro[1,3,5]triazine in N,N-dimethylformamide at room temperature is described. The reaction occurs without affecting the phenolic hydroxy group. Georg Thieme Verlag Stuttgart.

NOVEL ARYLOXYPHENYLPROPANAMINES

-

Page/Page column 58-59, (2010/11/25)

The present invention relates to a non-radioactive, heavy-atom isotopologue of Compound 1 containing one or more deuterium in place of a hydrogen covalently bound to carbon. The Compound 1 isotopologues of the invention are inhibitors of norepinephrine up

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 58402-38-3