591-93-5Relevant articles and documents
Srinivasan
, p. 2752 (1968)
CATALYTIC HYDROCARBON DEHYDROGENATION
-
Paragraph 0056; 0122; 0123, (2021/03/13)
A catalyst for dehydrogenation of hydrocarbons includes a support including zirconium oxide and Linde type L zeolite (L-zeolite). A concentration of the zirconium oxide in the catalyst is in a range of from 0.1 weight percent (wt. %) to 20 wt. %. The catalyst includes from 5 wt. % to 15 wt. % of an alkali metal or alkaline earth metal. The catalyst includes from 0.1 wt. % to 10 wt. % of tin. The catalyst includes from 0.1 wt. % to 8 wt. % of a platinum group metal. The alkali metal or alkaline earth metal, tin, and platinum group metal are disposed on the support.
Phosphonate-Modified UiO-66 Br?nsted Acid Catalyst and Its Use in Dehydra-Decyclization of 2-Methyltetrahydrofuran to Pentadienes
Caratzoulas, Stavros,Chen, Tso-Hsuan,Dauenhauer, Paul,Dorneles de Mello, Matheus,Han, Songi-I,Jain, Sheetal K.,Kumar, Gaurav,Li, Xinyu,Scott, Susannah L.,Tabassum, Tarnuma,Tsapatsis, Michael,Vlachos, Dionisios G.
supporting information, p. 13260 - 13266 (2020/06/08)
Phosphorus-modified all-silica zeolites exhibit activity and selectivity in certain Br?nsted acid catalyzed reactions for biomass conversion. In an effort to achieve similar performance with catalysts having well-defined sites, we report the incorporation of Br?nsted acidity to metal–organic frameworks with the UiO-66 topology, achieved by attaching phosphonic acid to the 1,4-benzenedicarboxylate ligand and using it to form UiO-66-PO3H2 by post-synthesis modification. Characterization reveals that UiO-66-PO3H2 retains stability similar to UiO-66, and exhibits weak Br?nsted acidity, as demonstrated by titrations, alcohol dehydration, and dehydra-decyclization of 2-methyltetrahydrofuran (2-MTHF). For the later reaction, the reported catalyst exhibits site-time yields and selectivity approaching that of phosphoric acid on all-silica zeolites. Using solid-state NMR and deprotonation energy calculations, the chemical environments of P and the corresponding acidities are determined.
One-pot Synthesis of 1,3-Butadiene and 1,6-Hexanediol Derivatives from Cyclopentadiene (CPD) via Tandem Olefin Metathesis Reactions
Turczel, Gábor,Kovács, Ervin,Csizmadia, Eszter,Nagy, Tibor,Tóth, Imre,Tuba, Robert
, p. 4884 - 4891 (2018/09/25)
A novel tandem reaction of cyclopentadiene leading to high value linear chemicals via ruthenium catalyzed ring opening cross metathesis (ROCM), followed by cross metathesis (CM) is reported. The ROCM of cyclopentadiene (CPD) with ethylene using commercially available 2nd gen. Grubbs metathesis catalysts (1-G2) gives 1,3-butadiene (BD) and 1,4-pentadiene (2) (and 1,4-cyclohexadiene (3)) with reasonable yields (up to 24 % (BD) and 67 % (2+3) at 73 % CPD conversion) at 1–5 mol % catalyst loading in toluene solution (5 V% CPD, 10 bar, RT) in an equilibrium reaction. The ROCM of CPD with cis-butene diol diacetate (4) using 1.00 - 0.05 mol % of 3rd gen. Grubbs (1-G3) or 2nd gen. Hoveyda-Grubbs (1-HG2) catalysts loading gives hexa-2,4-diene-1,6-diyl diacetate (5), which is a precursor of 1,6-hexanediol (an intermediate in polyurethane, polyester and polyol synthesis) and hepta-2,5-diene-1,7-diyl diacetate (6) in good yield (up to 68 % or TON: 1180). Thus, convenient and selective synthetic procedures are revealed by ROCM of CPD with ethylene and 4 leading to BD and 1,6-hexanediol precursor, respectively, as key components of commercial intermediates of high-performance materials.
