Synthesis and antiviral activity of novel 1,3,4-thiadiazole inhibitors of DDX3x

Article abstract of DOI:10.3390/molecules24213988

The human ATPase/RNA helicase X-linked DEAD-box polypeptide 3 (DDX3X) emerged as a novel therapeutic target in the fight against both infectious diseases and cancer. Herein, a new family of DDX3X inhibitors was designed, synthesized, and tested for its inhibitory action on the ATPase activity of the enzyme. The potential use of the most promising derivatives it has been investigated by evaluating their anti-HIV-1 effects, revealing inhibitory activities in the low micromolar range. A preliminary ADME analysis demonstrated high metabolic stability and good aqueous solubility. The promising biological profile, together with the suitable in vitro pharmacokinetic properties, make these novel compounds a very good starting point for further development.

Full text of DOI:10.3390/molecules24213988

molecules
Article
Synthesis and Antiviral Activity of Novel
1,3,4-Thiadiazole Inhibitors of DDX3X
Annalaura Brai 1,† , Stefania Ronzini 1,† , Valentina Riva 2,†, Lorenzo Botta 1,
Claudio Zamperini 1 , Matteo Borgini 1 , Claudia Immacolata Trivisani 1, Anna Garbelli 2,
Carla Pennisi 2, Adele Boccuto 3, Francesco Saladini 3, Maurizio Zazzi 3 , Giovanni Maga 2,
*
and Maurizio Botta 1,4,
*
1
Dipartimento Biotecnologie, Chimica e Farmacia, Università degli Studi di Siena, Via A. Moro 2,
I-53100 Siena, Italy; annalaura.brai@gmail.com (A.B.); ronzinis@gmail.com (S.R.);
lor.botta83@gmail.com (L.B.); claudiozamperini@yahoo.it (C.Z.);
borgini.m4@gmail.com (M.B.); c.trivisani@gmail.com (C.I.T.)
2
3
4
Istituto di Genetica Molecolare, IGM-CNR “Luigi Luca Cavalli-Sforza”, Via Abbiategrasso 207, I-27100 Pavia,
Italy; valentina.riva01@universitadipavia.it (V.R.); agarbelli@gmail.com (A.G.); carlapennisi@outlook.it (C.P.)
Dipartimento di Biotecnologie Mediche, Università degli Studi di Siena, 53100 Siena, Italy;
adele.boccuto@gmail.com (A.B.); france.saladini@gmail.com (F.S.); maurizio.zazzi@gmail.com (M.Z.)
Biotechnology College of Science and Technology, Temple University, BioLife Science Building, Suite 333,
1900 North 12th Street, Philadelphia, PA 19122, USA
*
†
Correspondence: giovanni.maga@igm.cnr.it (G.M.); botta.maurizio@gmail.com (M.B.)
These authors contributed equally to this work.
ꢀꢁꢂꢀꢃꢄꢅꢆꢇ
ꢀꢁꢂꢃꢄꢅꢆ
Received: 2 September 2019; Accepted: 4 October 2019; Published: 4 November 2019
Abstract: The human ATPase/RNA helicase X-linked DEAD-box polypeptide 3 (DDX3X) emerged as
a novel therapeutic target in the fight against both infectious diseases and cancer. Herein, a new family
of DDX3X inhibitors was designed, synthesized, and tested for its inhibitory action on the ATPase
activity of the enzyme. The potential use of the most promising derivatives it has been investigated
by evaluating their anti-HIV-1 effects, revealing inhibitory activities in the low micromolar range.
A preliminary ADME analysis demonstrated high metabolic stability and good aqueous solubility.
The promising biological profile, together with the suitable in vitro pharmacokinetic properties, make
these novel compounds a very good starting point for further development.
Keywords: DDX3X; HIV-1; host proteins; antivirals
1. Introduction
Human ATPase/RNA helicase X-linked DEAD-box polypeptide 3 (DDX3X) belongs to the
DEAD-box proteins, a large family of ATP-dependent RNA helicases that are involved in many aspects
of RNA metabolism [
shuttle protein that is able to export the viral RNA from the nucleus to the cytoplasm [
Ishaq and coworkers [ ] demonstrated that DDX3X knockdown suppressed HIV replication without
inducing apoptosis. Besides HIV, DDX3X is known to be an essential host factor for other major human
viral pathogens, such as Hepatitis B and C viruses [ ], as well as for emerging viruses, such as
1
]. In 2004, Yedavalli et al. highlighted its fundamental role in HIV-1 life cycle as a
2
], subsequently
3
4–6
Dengue virus (DENV), West-Nile virus (WNV), and Japanese Encephalitis Virus (JEV) [7,8].
DDX3X has multiple enzymatic activities (ATPase and RNA helicase) and functional domains that
might be targeted by potential inhibitors [
oriented towards ATPase inhibitors, while only few efforts have been devoted to affect the helicase
activity of DDX3X by targeting the RNA binding pocket with small molecules [11 14]. Figure 1 shows
the structures of known DDX3X ATPase inhibitors. The first ATPase DDX3X inhibitors were discovered
9,10]. Drug discovery activity in this area has been mostly
–
Molecules 2019, 24, 3988; doi:10.3390/molecules24213988
www.mdpi.com/journal/molecules

Molecules 2019, 24, 3988
2 of 18
in 2008 [15]. Among them, we identified FE15 through a virtual screening approach. This compound,
characterized by a rhodanine scaffold, showed low micromolar potency of inhibition against the
DDX3X ATPase activity and it was able to inhibit the HIV-1 replication in MT4 cells with an EC50 of
86.7 µM, without showing cytotoxicity. Similarly, the ring expanded nucleosides (RENs) were found
able to inhibit the ATP dependent activity of DDX3X and suppress HIV-1 replication in T cells and
monocyte-derived macrophages [16]. In 2011, through a hit optimization protocol, we identified the
second generation of rhodanine DDX3X inhibitors endowed with an improved activity profile (as an
example FE109 showed a Ki of 0.2 µM) [17]. In parallel, some REN derivatives were synthesized, among
them compound NZ51 has been reported to inhibit the ATP dependent helicase activity of DDX3X, as
well as the proliferation of cancer cells expressing high levels of DDX3X [18]. Raman and coworkers
have recently reported compound RK-33 containing the diimidazo[4,5-d;40,50-f] [1,3]diazepine ring.
RK
different tumor cell lines derived from lung (A-549 and H-460), prostate (PC-3), breast (MCF-7 and
MDA-MB-231), and ovarian (OVCAR-3) cancers [19 21]. At the same time, ketorolac salt has been
-33 has been extensively studied as an anticancer compound, and its spectrum of activity includes
–
identified as a novel DDX3X inhibitor able to affect the ATPase activity and endowed with anticancer
activity against oral squamous cell carcinoma (OSCC) cell lines [22].
Figure 1. Two-dimensional (2D) Structures of previously identified DDX3X ATPase inhibitors.
Herein, docking studies were employed to guide the design of new DDX3X inhibitors endowed
with a thiadiazole nucleus. Being the rhodanines promiscuous binders with poor selectivity and also
considered to be Pan Assay Interference Compounds (PAINS) [23], we pursued the idea of replacing
the rhodanine moiety with a different ring maintaining profitable interactions within the ATP binding
pocket of DDX3X. As a result, a new series of inhibitors of the ATPase activity of DDX3X was identified
that showed good anti-HIV activity. Taken together, our results led to the identification of a new family
of DDX3X inhibitors that can be used as a starting point to identify novel preclinical candidates to treat
viral diseases that are caused by DDX3X dependent pathogens.
2. Results
2.1. Molecular Modeling
Docking simulations were performed on the known ATPase DDX3X inhibitors RK33 and ketorolac
in order to study the key molecular interactions on the basis of their inhibitory activity and the predicted
binding modes were compared to those previously published for the active rhodanine derivative FE15

Molecules 2019, 24, 3988
3 of 18
as well as with that of the crystallized ligand AMP (Figure 2). Calculations were performed according
to the already published protocol [15].
Figure 2. Binding poses of (A) AMP (salmon), (B) FE15 (blue), (C) RK-33 (yellow), and (D) ketorolac
(periwinkle) into the ATP pocket of human DDX3. For the sake of clarity, only a few key residues are
labeled, hydrogen atoms are omitted, and hydrogen-bonding interactions are represented by black
dashed lines. Compounds and key amino acids are in stick representation.
An analysis of the interactions established by the studied DDX3X inhibitors within the ATP
binding pocket was performed. Common interactions emerged from such investigation. In detail,
the studied inhibitors established a hydrogen bond with Gln207 and a π-π interaction with Tyr200
that resulted in being crucial for their inhibitory activity. Furthermore, FE15 and ketorolac made
polar contacts with Gly227 and Gly229, mimicking the phosphate group of AMP. Ketorolac, being
endowed with an acidic group, better reproduced the phosphate interactions and indeed additionally
interacted with Thr231. FE15 and RK-33 both also occupied a region delineated by the amino acids
Thr201 and Arg202. Taking into consideration all of the interactions made by the known active ligands,
a new series of compounds was designed that contains all of the features identified as being crucial
for the activity against DDX3X. The rhodanine group included in our previous hit compound, FE15
,
was discarded. Indeed, rhodanine derivatives are promiscuous binders that have been associated
with multiple biological activities. Furthermore, rhodanines have been described as PAINS and
highly problematic frequent hitters [23,24]. Viceversa, the thiadiazole ring, is an important framework
in medicinal chemistry. Thiadiazole is a bioisostere of pyrimidine and oxadiazole and given the
prevalence of pyrimidine in nature it is unsurprising that thiadiazoles exhibit significant therapeutic
potential. Accordingly, a number of thiadiazole-containing drugs are currently on the market [25].
For the above reasons, we decided to replace the rhodanine nucleus of the hit compound FE15 with a
1,3,4-thiadiazole ring.
Docking studies predicted good poses for the novel series of compounds within the ATP binding
pocket of DDX3X. The binding mode of compound 23 (as representative of the novel series) revealed
its ability to establish (Figure 3), similarly to the active inhibitors RK33, ketorolac, and FE15, hydrogen
bond interactions with the crucial residues Gln207, Gly227, Gly229, Thr231, Thr201, and Arg202.

Molecules 2019, 24, 3988
4 of 18
Furthermore, its binding mode is stabilized by a
π
-π
contact between the thiadiazole heterocycle and
the side-chain of Tyr200. Starting from this result, a small library of 1,3,4-thiadiazole derivatives has
been rationally designed and synthesized.
Figure 3. Binding mode of 1 within the ATP binding pocket of human DDX3.
2.2. Chemistry
The synthesis of final compounds 23
intermediates 5–7 and 14–16.
–28 and 29–32 first entailed the synthesis of the key
According to Scheme 1,
5,
6, and
7
were obtained by condensation of the thiosemicarbazide
4
with the opportune benzoic acid 1–3.
N
R3
O
R3
N
S
POCl3
R2
R1
R2
R1
NH2
OH
S
+
NH2
NH2 NH
reflux, 4h
1 R1=OCH3 ; R2=H; R3=H;
4
5 R1=OCH3 ; R2=H; R3=H;
2
3
6
7
R1=OH ; R2=H; R3=H;
R1=H ; R2=H; R3=Br;
R1=OH ; R2=H; R3=H;
R1=H ; R2=H; R3=Br;
.
Scheme 1. Synthesis of intermediates 5–7.
The synthesis of intermediates 14
,
15, and 16 is depicted in Scheme 2. Aromatic aldehydes
8–
10
reacted with thiosemicarbazide
4
to furnish thiosemicarbazones 11
–13. Subsequent cyclization in the
presence of FeCl3 provides intermediates 14–16.
N
N
R3
R3
R3
EtOH
S
H
FeCl3 6H2O
EtOH
R2
R1
R2
R1
N
NH2
NH2
R2
R1
H2O
S
N
O
NH2
NH2 NH
+
reflux, o.n.
reflux, o.n.
S
8
4
11
14
R1=OCH3 ; R2=OCH3; R3=H;
R1=OCH3 ; R2=OCH3; R3=H;
R1=OCH3 ; R2=OCH3; R3=H;
9 R1=N(CH3)2 ; R2=H; R3=H;
10 R1=H ; R2=H; R3=NO2;
12 R1=N(CH3)2 ; R2=H; R3=H;
13 R1=H ; R2=H; R3=NO2;
15 R1=N(CH3)2 ; R2=H; R3=H;
16 R1=H ; R2=H; R3=NO2;
Scheme 2. Synthesis of intermediates 14–16.

Molecules 2019, 24, 3988
5 of 18
Intermediates
5
–
7
and 14
–
16 were reacted with phtalimide to furnish compounds 17
28. Esters 29 32 were synthesized
28 with the opportune alcohoxydes (Scheme 3). As depicted in Scheme 4
sulfonic acids 33 and 34 were produced by reacting between aminothiazoles and 16 and 2-Sulfobenzoic
–22.
Subsequent hydrolysis in presence of LiOH provides final acids 23
by the reaction of acids 23
–
–
–
5
acid cyclic anhydride. Finally, reduction of compounds 34 and 28 led to anilines 35 and 36 (Scheme 5).
Scheme 3. Synthesis of final compounds 23–32.
Scheme 4. Synthesis of final compounds 33–34.
Scheme 5. Synthesis of final compounds 35 and 36.
2.3. Biological Evaluation
Derivatives 23–36 were next evaluated for their ability to inhibit the ATPase activity of DDX3X.
As reported in Table 1, compounds were characterized by Ki values in the low micromolar range
against the ATPase binding site, confirming the validity of the reported approach. The phtalimido
compound 17 was found to be completely inactive, probably due to its chemical instability. The
para-methoxy derivative 23 and its corresponding phenol derivative 24 are endowed with the best
affinity values (Ki) of 1.5
µM and 1.9
µM, respectively. The substitution of acidic function with ester
slightly reduced the activities, being derivatives 29
,
30 and 31 respectively 12.5, 16.8 and 18.8 times less
active than compound 23. The introduction of electron withdrawing groups, such as bromine and nitro
in ortho position, abolished (compound 25) or reduced the activity (compound 28), despite even in this

Molecules 2019, 24, 3988
6 of 18
case the substitution of the carboxylic acid with a methyl ester (compound 32) annulled enzymatic
inhibition. The introduction of dimethylamino group in para position slightly decreased the activity in
compound 27 (Ki = 11.9), while the introduction of amino group induced the total loss of inhibitory
capability of compound 36. Finally, the replacement of the carboxylic group with sulfonic acid was
detrimental for the activity of compounds 33, 34, and 35.
Table 1. Biological evaluation of selected compounds against DDX3X ATPase and HIV-1 infected cells [a]
.
DDX3X
ATPase
HIV-1 (NL4-3)
Cpd.
ID
Structure
[b]
[c,d]
Ki [b]
(µM)
IC50
CC50
(µM)
(µM)
17
>50
NT
NT
23
24
25
1.3 ± 0.2
1.9 ± 0.4
NA
>50
2.8 ± 1.5
NT
>200
125
NT
26
27
NA
NT
NT
130
11.9 ± 1.9
>50
28
29
18.3 ± 1.8
42.3 ± 5.2
74
45
15.6
10

Molecules 2019, 24, 3988
7 of 18
Table 1. Cont.
DDX3X
ATPase
Ki [b]
HIV-1 (NL4-3)
Cpd.
ID
Structure
[b]
[c,d]
IC50
CC50
(µM)
(µM)
(µM)
O
N
N
NH
O
30
31
32
33
34
35
36
20.1 ± 2.1
23.5 ± 2.5
NA
>50
>200
100
NT
NT
110
130
NT
S
O
O
16.0 ± 10
NT
NA
NT
35.4 ± 3.5
20.1 ± 2.1
NA
>50
>50
NT
[a] Data represent mean
±
standard deviation of three experiments. [b] Ki, apparent dissociation constant for inhibitor
[c]
binding; IC50: half maximal inhibitory concentration or needed concentration to inhibit 50% viral replication.
CC50 Cytotoxic concentration 50 or needed concentration to induce 50% death of non-infected cells.
on H9 cells. NA: not active; NT: not tested.
[d]
Evaluated
Compounds that were endowed of the best anti-enzymatic activity values were then essayed
against HIV-1 in H9 cells. As reported in Table 1, esters derivatives 29 and 31 had promising antiviral
activity values of 36
attributable to its cytotoxic effect (SI = 1.7). The best result is represented by compound 24, characterized
by a promising antiviral activity of 3.9 M without signs of cytotoxicity (CC50 = 125 M, SI = 45).
µM and 16 µM. However, compound 28 had some antiviral activity that can be
µ
µ
Strikingly, its p-methoxy derivative 23 was found to be inactive. The reasons are unknown and
under investigation.

Molecules 2019, 24, 3988
8 of 18
2.4. ADME Assays
Selected compounds were then analyzed in vitro for liver microsomal stability, membrane passive
permeability, and aqueous solubility at pH 7.4.
Microsomal metabolic stability was evaluated by incubating each compound at 37 ◦C for 60 min. in
phosphate buffer in presence of human liver microsomes. The reaction mixtures were then centrifuged,
and the parent drug and metabolites were subsequently determined by LC-UV-MS. As reported in
Table 2, compounds 23 and 24 had good metabolic stability, and only little percentage of the parent
compound was metabolized into the dealkylated and into the oxidized derivatives. Contrarily, esters
29–31 revealed low stability, and they were rapidly converted into their corresponding carboxylic
acids. In particular, compound 29 was rapidly converted into methoxy derivative 23 and phenol
derivative 24.
Table 2. In vitro ADME studies of selected compounds.
AppP b
CPD ID
Metabolism a
AqS c
<0.1
(0%)
3.3
(−5.03)
M1 1.9%
M1 1.2%
P 98.1%
P 98.8%
<0.1
(0%)
27.8
(−4.08)
0.7
(36%)
0.5
(−5.87)
M2 12.8%
M1 61.7%
P 25.3%
P 75.7%
2.1
(4.6%)
<0.1
(>−6)
M2 2.0
M1 22.3
6.1
(25.9%)
<0.1
(>−6)
P
M2 3.3%
M1 42.8%
P 53.8%
a
Human Liver Microsomal Metabolic Stability expressed as percentage of unmodified parent drug, methabolites
b
c
M1 and M2 are reported. Apparent permeability reported in cm
as Log of molar concentration.
·
s−1
.
Aqueous solubility expressed as µg/mL and
Kinetic solubility was calculated adding 1 mg of compound into 1 mL of water. After 24 h of
stirring at 27 ◦C, the mixture was filtered and the quantity of solubilized compound determined by
LC-MS-MS. As reported in Table 1, compounds 23, 24, and 29 showed very promising solubility values.
By contrast, esters 30 and 31 due to their lipophilicity have values outside the recommended range
(−2 < LogS < −6).
Finally, we evaluated passive membrane permeability (AppP) while using Parallel Artificial
Membrane Permeability Assay (PAMPA). The quantity of compound able to diffuse through a
semipermeable artificial membrane was calculated by LC-MS-MS. As reported in Table 1, acids 23 and

Molecules 2019, 24, 3988
9 of 18
24 showed low AppP, in contrast esters derivatives 29
–31 possessing very good permeability values,
directly proportional to the length of their sidechains.
3. Experimental Section
3.1. General Procedures
The reagents were from Sigma-Aldrich (Milan, Italy), Alfa Aesar (Kandel, Germany) and Merck.
Commercially available CH2Cl2 and MeOH were dried to remove calcium hydride or magnesium
methoxide contaminants.
Anhydrous reactions were performed at positive pressure in dry N2 or argon atmosphere. TLC
was carried out on Merck silica gel 60 F254 TLC plates. Flash chromatography was performed on
Merck 60 silica gel, 23–400 mesh, columns.
For NMR spectra, a Bruker Avance DPX400 spectrometer (Bruker, Billerica, MA, USA) at
400 MHz for 1H-NMR or 100 MHz for 13C-NMR was used. Reported chemical shifts are relative to
tetramethylsilane at 0.00 ppm. The abbreviations used for 1H patterns were: s = singlet, d = doublet,
t = triplet, q = quartet, quint = quintet, sx = sextet, sept = septet, m = multiplet, br = broad signal, and
br s = broad singlet.
For mass spectra (MS), an Agilent 1100 LC/MSD VL system (G1946C, Agilent Technologies,
Palo Alto, CA, USA) with a 0.4 mL/min. flow rate was used in a binary solvent system 25 of 95:5
methyl alcohol/water. UV were monitored at 254 nm. Positive and negative mode scanning for mass
spectra acquisition over the mass range was used.
3.1.1. General Procedure for the Synthesis of Amino Thiazoles 5–7
A mixture of the opportune substituted benzoic acid (6.57 mmol), thiosemicarbazide (9.85 mmol)
and phosphorus oxychloride (5 mL) was stirred at 75 ◦C for 4 h under N2 atmosphere. After cooling to
room temperature, water was added and the reaction mixture was further refluxed for 4 h. The mixture
was cooled and basified to pH 8 by the addition of 1N NaOH(aq) solution. The resulting mixture was
then extracted three times with EtOAc and then washed with water. Organic layer was dried over
Na2SO4 and evaporated under reduced pressure. The crude mass was recrystallized from EtOH. The
compounds were obtained as light-yellow solids in a yield of 75–80%.
5-(4-Methoxyphenyl)-1,3,4-thiadiazol-2-amine (
1H-NMR (400 MHz, Acetone):
7.73–7.71 (d, J = 8.0 Hz, 2H), 7.01–6.99 (d, J = 8.0 Hz, 2H), 6.56 (bs, 2H),
3.84 (s, 3H) ppm. LC-MS (ES): m/z 230 [M + Na]+.
5): crystallization in EtOH. Yellow solid, yield 75%.
δ
4-(5-Amino-1,3,4-thiadiazol-2-yl)phenol (
): crystallization in EtOH. Yellow solid, yield 30%.1H-NMR
8.88 (bs, 1H), 7.65–7.64 (d, J = 5.2 Hz, 2H), 6.92–6.91 (d, J = 5.2 Hz, 2H), 6.57
6
(400 MHz, Acetone):
(bs, 2H) ppm.
δ
5-(2-Bromophenyl)-1,3,4-thiadiazol-2-amine (
7
): Purification eluent DCM/MeOH 98:2, yield 50%, yellow
1
solid. H-NMR (400 MHz, CDCl3):
δ 7.95–7.93 (d, J = 8.0 Hz, 1H), 7.68–7.66 (d, J = 8.0 Hz, 1H), 7.42–7.38
(t, J = 8.0 Hz, 1H), 7.32–7.30 (t, J = 8.0Hz, 1H), 7.26 (bs, 2H) ppm.
3.1.2. General Procedure for the Synthesis of Thiosemicarbazones 11–13
The opportune aromatic aldehyde 8–10 (40 mmol) was dissolved in warm EtOH was added to an
aqueous solution of thiosemicarbazide (40 mmol) with continous stirring. After 1 h, the white solid tha
formed was filtered off as pure 11–13.
(2-(3,4-Dimethoxybenzylidene)hydrazine-1-carbothioamide (11): crystallization in EtOH. Yellow solid, yield
1
60%. H-NMR (400 MHz, DMSO-d6):
δ 11.20 (bs, 1H), 8.07 (s, 1H),7.88 (s, 1H), 7.43 (bs, 2H), 7.06–7.04
(d, J = 8.0 Hz, 1H), 6.88–6.86 (d, J = 8.0Hz, 1H), 3.73 (s, 3H), 3.70 (s, 3H) ppm.

Molecules 2019, 24, 3988
10 of 18
2-(4-(Dimethylamino)benzylidene)hydrazine-1-carbothioamide (12): crystallization in EtOH, yellow solid,
1
yield 50%, H-NMR (400 MHz, DMSO-d6):
δ 12.3 (bs, 1H), 8.41 (s, 1H), 7.75 (bs, 2H), 7.48–7.46
(d, J = 8.0 Hz, 2H), 6.81–6.6.79 (d, J = 8.0 Hz, 1H), 3.02 (s, 6H) ppm.
3.1.3. General Procedure for the Synthesis of Thiadiazoles 14–16
Te opportune thiosemicarbazone (5 mmol) was suspended in EtOH, to this FeCl3 6H2O (20 mmol)
·
was added and the reaction mixture was stirred under reflux for further 12 h. The reaction mixture was
quenched with aqueous Na2S2O3, cooled to room temperature, poured into 30 mL water under stirring,
and then extracted with CH2Cl2 (three times). The organic layer was dried over anhydrous Na2SO4.
The organic solvent evaporated and the corresponding residue was purified by recrystallization from
EtOH to afford the corresponding thiadiazoles 14–16.
5-(3,4-Dimethoxyphenyl)-1,3,4-thiadiazol-2-amine (14): crystallization in EtOH. Yellow solid, yield 44%.
1H-NMR (400 MHz, DMSO-d6):
δ 7.28 (s, 1H), 7.22 (bs, 2H),7.13–7.12 (d, J = 2.8 Hz, 1H), 6.65–6.64
(d, J = 2.8 Hz, 1H), 3.75 (s, 3H), 3.72 (s, 3H) ppm.
5-(4-(Dimethylamino)phenyl)-1,3,4-thiadiazol-2-amine (15): crystallization in EtOH. yellow solid, yield
50%, 1H-NMR (400 MHz, DMSO-d6):
δ 7.72–7.70 (d, J = 8.0 Hz, 2H), 7.57 (bs, 2H), 6.90–6.88 (d, J = 8.0 Hz,
2H), 3.14 (s, 6H) ppm.
5-(2-Nitrophenyl)-1,3,4-thiadiazol-2-amine (16). To a suspension of 2 (100 mg, 0.44 mmol) in EtOH (10 mL),
FeCl3*6H2O (482.1 mg, 1.78 mmol) in EtOH (10 mL) was added and the resulting mixture was heated
at reflux for 12 h. The reaction mixture was diluted with water, alkalized by 10% NaOH solution, and
then extracted with DCM. The organic layer was evaporated and the residue was recrystallized from
1
Ethanol (60% yield). H NMR (DMSO-d6):
δ
7.93 (d, J = 7.4 Hz, 1H), 7.74–7.64 (m, 3H), 7.53 (s, 2H)
ppm. 13C-NMR (DMSO-d6):
δ 170.4, 150.9, 148.7, 133.2, 131.7, 131.2, 124.7, 124.0. LC-MS(ES) m/z =
222.7 [M + H]+, m/z = 244.8 [M + Na]+.
3.1.4. General Procedure for the Synthesis of Isoindoline-1,3-Diones 17–22
To a solution of substituted-1,3,4-thiadiazol-2-amine (0.48 mmol) in CH3CN, phtalic anhydride
(1.4 mmol) and triethylamine (1.05 mmol) were added, and the corresponding mixture was stirred at
reflux overnight under N2 atmosphere. The product was filtered and washed with EtOAc to give a
light yellow solid.
1
2-(5-(4-Methoxyphenyl)-1,3,4-thiadiazol-2-yl)isoindoline-1,3-dione (17): Yellow solid, yield 78%. H-NMR
(400 MHz, DMSO-d6):
13C-NMR (DMSO-d6):
115.43, 114.87 ppm.
δ
8.06–8.04 (m, 2H), 7.98–7.96 (m, 4H, 7.12–7.10 (d, J = 8.0 Hz, 2H), 3.84 (s, 3H).
167.05, 164.74, 162.25, 152.88, 136.03, 131.59, 129.67, 124.74, 122.41, 115.95,
δ
2-(5-(4-Hydroxyphenyl)-1,3,4-thiadiazol-2-yl)isoindoline-1,3-dione (18): filtration, yellow solid, yield 80%.
1H-NMR (400 MHz, DMSO-d6):
10.23 (bs, 1H), 8.05–8.02 (m, 2H), 7.97–7.94 (m, 2H), 7.86-7.84
δ
(d, J = 8.0 Hz, 2H), 6.93–6.91 (d, J = 8.0 Hz, 2H).
2-(5-(2-Bromophenyl)-1,3,4-thiadiazol-2-yl)isoindoline-1,3-dione (19): filtration, yellow solid, yield 45%.
1H-NMR (400 MHz, CDCl3):
δ 8.21–8.19 (d, J = 8.0 Hz, 1H), 8.08–8.04 (m, 2H), 7.91–7.88 (m, 2H),
7.75–7.73 (d, J = 8.0 Hz, 1H), 7.49–7.46 (t, J = 7.2 Hz, 1H), 7.38–7.34 (t, J = 8.0 Hz, 1H), 7.26 (s, 1H).
2-(5-(3,4-Dimethoxyphenyl)-1,3,4-thiadiazol-2-yl)isoindoline-1,3-dione (20): filtration, Yellow solid, yield
1
63%. H-NMR (400 MHz, DMSO-d6):
δ 8.08 (s, 1H), 8.00–7.98 (d, J = 8 Hz, 1H), 7.91–7.89 (d, J = 8.0 Hz,
1H), 7.50 (s, 1H), 7.42–7.40 (d, J = 8.0 Hz, 1H), 7.07–7.05 (d, J = 8.0 Hz 1H), 3.81 (s, 3H), 3.78 (s, 3H).
2-(5-(4-(Dimethylamino)phenyl)-1,3,4-thiadiazol-2-yl)isoindoline-1,3-dione (21): filtration, Yellow solid,
1
yield 45%. H-NMR (400 MHz, CDCl3):
δ 8.06–8.08 (d, J = 8.0 Hz, 2H), 7.92–7.88 (m, 4H), 7.26–7.25
(d, J = 3.2 Hz, 1H), 6.92–6.91 (d, J = 3.2 Hz, 1H).

Molecules 2019, 24, 3988
11 of 18
2-(5-(2-Nitrophenyl)-1,3,4-thiadiazol-2-yl)isoindoline-1,3-dione (22). Crystallization MeCN (81% yield,
1
brown solid). H NMR (DMSO-d6):
δ 8.14 (d, J = 7.3 Hz, 1H), 8.08–8.06 (m, 2H), 7.97–7.94 (m, 3H),
7.90–7.82 (m, 2H). LC-MS(ES) m/z = 352.9 [M + H]+, m/z = 375.0 [M + Na]+.
3.1.5. General Procedure for the Synthesis of Acids 23–28
Lithium hydroxide monohydrate (0.18 mmol) was added to
a
suspension of
substituted-(1,3,4-thiadiazol-2-yl)isoindoline-1,3-dione (0.15 mmol) in a (1:1) mixture of H2O:THF.
The reaction mixture was stirred at room temperature for 2 h, and was then acidified with HCl 1N
and extracted three times with EtOAc. The organic layer was dried over anhydrous Na2SO4 and the
solvent was removed at reduced pressure to provide the final product as white solid, which was used
in the next step without further purification.
2-((5-(4-Methoxyphenyl)-1,3,4-thiadiazol-2-yl)carbamoyl)benzoic acid (23): crystallization MeCN, yield 67%
1H NMR (DMSO):
ppm 13C-NMR (DMSO):
δ 12.98 (s, 1H), 7.90–7.86 (m, 2H), 7.65–7.56 (m, 2H), 7.06–7.04 (m, 2H), 3.79 (s, 3H)
δ
167.55, 167.01, 161.76, 161.09, 158.06, 135.97, 131.87, 130.38, 130.30, 129.76,
128.56, 128.52, 128.48, 128.17, 122.17, 114.78, 55.42 ppm LC-MS(ES) m/z = 352.9 [M + H]+, m/z = 354.0
[M − H]−.
2-((5-(4-Hydroxyphenyl)-1,3,4-thiadiazol-2-yl)carbamoyl)benzoic acid (24): crystallization in EtOH. white
solid, yield 75%, 1H-NMR (400 MHz, DMSO-d6):
δ
13.16 (bs, 1H), 10.04 (s, 1H), 7.93-7.91 (d, J = 8.0 Hz,
1H), 7.79–7.77 (d, J = 8.0 Hz, 2H), 7.69–7.60 (m, 3H), 6.90–6.88 (d, J = 8.0 Hz, 2H). 13C-NMR (100 MHz,
DMSO-d6): 167.96, 167.49, 162.60, 160.17, 158.21, 136.50, 132.32, 130.82, 130.22, 129.10, 128.64, 121.70,
116.56 ppm.
δ
2-((5-(2-Bromophenyl)-1,3,4-thiadiazol-2-yl)carbamoyl)benzoic acid (25): Purification eluent DCM/MeOH
1
96:4, yield 50%, white solid. H-NMR (400 MHz, DMSO-d6):
δ 13.40 (bs, 1H), 7.97–7.93 (t, J = 8.0 Hz,
2H), 7.85–7.83 (d, J = 8.0 Hz, 1H), 7.68–7.61 (m, 3H), 7.58–7.54 (t, J = 8.0 Hz, 1H), 7.49–7.45 (t, J = 8.0 Hz,
1H). 13C-NMR (100 MHz, DMSO-d6):
δ
168.18, 167.56, 160.70, 159.82, 136.20, 134.32, 132.44, 132.30,
132.21, 131.60, 130.96, 130.35, 128.79, 128.75, 121.89 ppm.
2-((5-(3,4-Dimethoxyphenyl)-1,3,4-thiadiazol-2-yl)carbamoyl)benzoic acid (26): crystallization in EtOH.
1
White solid, yield 60%. H-NMR (400 MHz, DMSO-d6):
δ 7.87–7.85 (d, J = 8 Hz, 1H), 7.64–7.54 (m, 3H),
7.45–7.41 (m, 2H), 7.04–7.02 (d, J = 8 Hz, 1H), 3.8 (s, 3H), 3.76 (s, 3H). 13C-NMR (100 MHz, CDCl3):
168.06, 167.43, 162.44, 158.58, 151.36, 149.65, 136.54, 132.41, 130.85, 130.61, 130.18, 128.60, 123.31,
δ
120.86, 112.57 ppm.
2-((5-(4-(Dimethylamino)phenyl)-1,3,4-thiadiazol-2-yl)carbamoyl)benzoic acid (27): crystallization in EtOH.
white solid, yield 98%, 1H-NMR (400 MHz, DMSO-d6):
δ
13.13 (bs, 1H), 7.92–7.90 (d, J = 8.0 Hz, 1H),
7.76–7.74 (d, J = 8.0Hz, 2H), 7.96–7.59 (m, 3H), 6.80–6.68 (d, J = 8.0Hz, 2H). 13C-NMR (100 MHz,
DMSO-d6):
δ 167.86, 167.50, 163.07, 152.15, 136.62, 132.32, 130.77, 130.18, 128.62, 128.49, 117.90,
112.52 ppm.
2-((5-(2-Nitrophenyl)-1,3,4-thiadiazol-2-yl)carbamoyl)benzoic acid (28): Crystallization MeCN (73% yield,
1
pale yellow solid). H NMR (DMSO-d6):
δ
8.06–8.00 (m, 3H), 7.90–7.74 (m, 3H), 7.59–7.51 (m, 2H).
13C-NMR (DMSO-d6):
δ 170.5, 167.7, 156.6, 149.0, 138.0, 133.5, 133.2, 132.2, 131.7, 131.3, 130.5, 130.0,
124.9, 124.5. LC-MS(ES) m/z = 370.9 [M + H]+, m/z = 393.0 [M + Na]+, m/z = 368.9 [M − H]−.
3.1.6. General Procedure for the Synthesis of Esters 29–32
A mixture of substituted-(1,3,4-thiadiazol-2-yl)isoindoline-1,3-dione (0.29 mmol) and the
opportune alcohoxide (0.29 mmol) was stirred at room temperature for 16 h under N2 atmosphere.
Mixture was diluted with diluted CH3COOH, the residue was filtered and the solvent was evaporated
at a reduced pressure. The product was purified via flash chromatography on silica gel (eluent
CHCl3/EtOH, 98/2) to furnish a white solid product.

Molecules 2019, 24, 3988
12 of 18
Methyl 2-((5-(4-methoxyphenyl)-1,3,4-thiadiazol-2-yl)carbamoyl)benzoate (29): Crystallization MeCN (53%
yield, white solid).1H NMR (DMSO-d6):
8.04–8.02 (m, 2H), 7.96–7.92 (m, 2H), 7.10–7.07 (m, 2H), 3.81
δ
(s, 3H) ppm 13C-NMR (DMSO-d6):
δ 167.05, 164.74, 162.25, 152.88, 136.03, 131.59, 129.67, 124.74, 122.41,
115.95, 115.43, 114.87 ppm LC-MS(ES) m/z = 370.1 [M + H]+.
Ethyl 2-((5-(4-methoxyphenyl)-1,3,4-thiadiazol-2-yl)carbamoyl)benzoate
(
30):
Purification eluent
8.00–7.98 (d, J = 8.0
CHCl3/EtOH 98:2, yield 10%, white solid. 1H-NMR (400 MHz, CDCl3):
δ
Hz, 1H), 7.84–7.82 (d, J = 8.0 Hz, 2H), 7.63–7.54 (m, 3H), 6.97–6.95 (d, J = 8.0 Hz, 2H), 4.29–4.23
(q, J = 7.2 Hz, 2H), 3.83 (s, 3H), 1.22–1.20 (t, J = 8.0 Hz, 3H). 13C-NMR (100 MHz, CDCl3):
δ
167.48,
165.99, 164.74, 132.24, 130.68, 130.38, 129.43, 128.82, 127.85, 114.61, 61.82, 55.44, 13.87 ppm. LC-MS(ES)
m/z = 384.2 [M + H]+.
Butyl 2-((5-(4-methoxyphenyl)-1,3,4-thiadiazol-2-yl)carbamoyl)benzoate
CHCl3/EtOH 98:2, crystallization in EtOH, yield 23%, white solid. 1H-NMR (400 MHz, CDCl3):
8.07–8.05 (d, J = 8 Hz, 1H), 7.77–7.75 (d, J = 8.0 Hz, 3H), 7.70–7.62 (m, 2H), 6.99–6.97 (d, J = 8 Hz, 2H),
4.23–4.19 (t, J = 6.8 Hz, 2H), 3.88 (s, 3H), 1.58–1.54 (q, J = 6.8 Hz, 2H), 1.33–1.28 (q, J = 7.6 Hz, 2H),
0.82–0.79 (t, J = 7.2 Hz, 3H). 13C-NMR (100 MHz, CDCl3):
167.44, 166.16, 162.39, 161.56, 159.59, 135.58,
(31):
Purification eluent
δ
δ
132.19, 130.55, 130.39, 129.96, 128.60, 128.51, 123.11, 114.49, 65.57, 55.47, 53.43, 30.47, 19.15, 13.64 ppm.
LC-MS(ES) m/z = 412.1 [M + H]+.
Methyl 2-((5-(2-nitrophenyl)-1,3,4-thiadiazol-2-yl)carbamoyl)benzoate (32): The crude was purified by flash
chromatography using 99:1 DCM:MeOH (35% yield, white solid).1H NMR (Acetone-d6):
δ 167.3, 166.0, 160.0, 157.7, 149.2, 136.2, 132.9, 132.3, 132.0,
131.4, 130.7, 129.9, 129.5, 128.3, 52.0 ppm. LC-MS(ES) m/z = 385.0 [M + H]+, m/z = 406.9 [M + Na]+.
δ
8.07–7.67
(m, 8H), 3.82 (s, 3H). 13C-NMR (Acetone-d6):
3.1.7. General Procedure for the Synthesis of Sulfonic Acids 33 and 34
2-Sulfobenzoic acid cyclic anhydride (0.99 mmol) and TEA (0.54 mmol) were added to a stirred
solution of the opportune aminothiazole (0.25 mmol) in MeCN (5 mL). The reaction mixture was
heated at reflux for 90 min. Then, water was added to the mixture and acidified to pH 2 with 1N HCl.
The resulting mixture was extracted with AcOEt, the organic layer was washed with brine, dried over
Na2SO4, filtered, and evaporated in vacuo. The crude was purified by flash chromatography while
using the opportune eluent.
2-((5-(4-Methoxyphenyl)-1,3,4-thiadiazol-2-yl)carbamoyl)benzenesulfonic acid (33): The crude was purified
by flash chromatography on silica gel (from 4:6 PE:AcOEt to 100% AcOEt). (68% yield, white solid).
1H NMR (DMSO-d6):
δ
8.05 (d, J = 7.9 Hz, 1H), 7.88 (d, J = 7.9 Hz, 2H), 7.74 (t, J = 8.0 Hz, 1H), 7.64–7.61
166.88, 163.42, 161.89, 158.65,
(m, 2H), 7.06 (d, J = 7.9 Hz, 2H), 3.87 (s, 3H) ppm. 13C-NMR (MeOD):
δ
143.12, 131.83, 130.88, 130.20, 129.95, 128.52, 127.30, 122.90, 114.50, 54.77 ppm. LC-MS(ES) m/z = 390.1
[M − H]−.
2-((5-(2-Nitrophenyl)-1,3,4-thiadiazol-2-yl)carbamoyl)benzenesulfonic acid (34): The crude was purified by
flash chromatography using from 4:6 PE:AcOEt to 100% AcOEt. (54% yield, yellow solid).1H NMR
(DMSO-d6):
δ 13.85 (s, 1H), 8.10 (d, J = 7.9 Hz, 1H),7.93 (d, J = 7.9 Hz, 2H), 7.89–7.78 (m, 3H), 7.65–7.55
(m, 2H). 13C-NMR (DMSO-d6):
δ 166.6, 160.2, 157.6, 149.0, 154.3, 133.6, 132.5, 132.0, 131.9, 131.4, 130.2,
127.4, 125.1, 124.0. LC-MS(ES) m/z = 404.9 [M − H]−.
3.1.8. General Procedure for the Synthesis of Compounds 35 and 36
Iron dust (0.61 mmol) and NH4Cl (0.061 mmol) were added to a solution of the opportune
nitrocompound (0.12 mmol) in a 3:1 mixture of EtOH/H2O (13 mL). The reaction mixture was stirred at
reflux for 30 min. After that, the mixture was filtered through a Celite pad, concentrated in vacuo, and
then purified by flash chromatography on silica gel whileusing the opportune eluent.

Molecules 2019, 24, 3988
13 of 18
2-((5-(2-Aminophenyl)-1,3,4-thiadiazol-2-yl)carbamoyl)benzenesulfonic acid (35): From EtOAc to 98:2
AcOEt:MeOH (76% yield, yellow solid). 1H NMR (DMSO-d6):
7.91 (d, J = 8.2 Hz, 1H), 7.80
δ
(d, J = 8.4 Hz, 1H), 7.60–7.49 (m, 3H),7.91 (d, J = 8.2 Hz, 1H),7.15 (t, J = 7.6 Hz, 1H), 6.87–6.83 (m, 3H),
1
6.62 (t, J = 7.4 Hz, 1H). H NMR (DMSO-d6 + D2O):
δ 7.91 (d, J = 8.2 Hz, 1H), 7.80 (d, J = 8.4 Hz,
1H), 7.60–7.49 (m, 3H), 7.91 (d, J = 8.2 Hz, 1H), 7.15 (t, J = 7.6 Hz, 1H), 6.83 (d, J = 8.3 Hz, 1H), 6.62
(t, J = 7.4 Hz, 1H). 13C-NMR (DMSO-d6):
δ 166.5, 164.7, 157.0, 147.1, 144.8, 131.8, 131.4, 131.2, 130.5,
130.3, 127.4, 116.7, 116.5, 111.6. LC-MS(ES) m/z = 376.9 [M + H]+, m/z = 374.9 [M − H]−.
2-((5-(2-Aminophenyl)-1,3,4-thiadiazol-2-yl)carbamoyl)benzoic acid (36). The residue was purified by
1
flash chromatography from 100% AcOEt to 95:5 AcOEt:MeOH (31% yield, yellow solid). H NMR
(DMSO-d6):
δ
7.86 (d, J = 7.4 Hz, 1H), 7.79 (d, J = 7.6 Hz, 1H), 7.56–7.44 (m, 3H), 7.14 (t, J = 7.6 Hz, 1H),
7.86 (d, J = 7.4 Hz, 1H), 7.79
6.90-6.84(m, 3H), 6.63 (t, J = 7.6 Hz, 1H). 1H NMR (DMSO-d6 + D2O):
δ
(
d, J = 7.6 Hz, 1H), 7.56–7.44 (m, 3H), 7.14 (t, J = 7.6 Hz, 1H), 6.82 (d, J = 9.2 Hz, 1H), 6.63 (t, J = 7.6 Hz,
1H). 13C-NMR (DMSO-d6):
δ 169.3, 167.4, 164.3, 158.2, 147.4, 134.2, 131.4, 131.2, 131.0, 130.8, 130.5,
129.8, 116.6, 116.2, 111.9.LC-MS(ES) m/z = 339.0 [M − H]−.
3.2. Enzymatic Assays
3.2.1. Protein Expression and Purification
Recombinant his-tagged human full length DDX3X was cloned into the E. coli expression vector
pET-30a(+). Shuffle T7 E. coli cells were transformed with the plasmid and grown at 37 ◦C up to OD600
= 0.7. DDX3X expression was induced with 0.5 mM IPTG at 15 ◦C O/N. The cells were harvested
◦
by centrifugation, lysed, and the crude extract centrifuged at 100.000xg for 60 min. at 4 C in a
Beckman centrifuge before being loaded onto a FPLC Ni-NTA column (GE Healthcare). Column was
equilibrated in Buffer A (50 mM Tris-HCl pH 8.0, 250 mM NaCl, 25 mM Imidazole, and 20% glycerol).
After extensive washing in Buffer A, the column was eluted with a linear gradient in Buffer A from 25
mM to 250 mM Imidazole. Proteins in the eluted fractions were visualized on SDS-PAGE and then
tested for the presence of DDX3X by Western blot with anti-DDX3X A300-475A(BETHYL) at 1:2000
dilution in 5% milk. Fractions containing the purest DDX3X protein were pooled and stored at
−
80 ◦C.
3.2.2. ATPase Assay
The ATPase assay was carried out by using the commercial kit Promega (Milan, Italy), ADP-GloTM
Kinase Assay. Reaction was performed in 30 mM TrisHCl pH 8, 9 mM MgCl2, 0.05 mg/mL BSA, 50
ATP, and 4
M of recombinant DDX3X. Reaction was performed following the ADP-GloTM Kinase
µM
µ
Assay Protocol and luminescence was measured with MicroBeta TriLux (Perkin Elmer, Milan, Italy).
3.3. Antiviral Assay
The antiviral activity was evaluated by measuring the half maximal inhibitory concentration
(IC50) values against the HIV-1 wild-type reference strain NL4-3 in a TZM-bl cell line based phenotypic
assay, named BiCycle Assay [26]. The method includes a first round of infection of human T cell
lymphoma derived clone H9 at multiplicity of infection of 0.03 in the presence of serial dilution of
compounds in a 96-well plate. After 72 h, 50 microliters of supernatants from each well were used to
infect the TZM-bl cell line, which allow the quantitative analysis of HIV infection by measuring the
expression of the luciferase gene integrated in the genome of the cells under the control of HIV-1 LTR
promoter. The contribution of DDX3X expression in TZM-bl cells does not contribute in a relevant
way to the determination of viral activity, as the reporter TZM-bl cells are minimally exposed to
investigational compounds.
After 48 h, dose-response curves were generated by measuring reporter gene expression in each
well by using the Bright-Glo Luciferase Assay (Promega) through the GloMax Discovery reader
(Promega). Relative luminescence units measured in each well were elaborated with the GraphPad

Molecules 2019, 24, 3988
14 of 18
Software v.6.0 to calculate IC50 values. All the viruses and cell lines were obtained through the NIH
AIDS Reagent Program (www.aidsreagent.org).
3.4. Cytotoxicity Assay
Cytotoxicity in H9 cells was determined by using the CellTiter-Glo 2.0 assay (Promega). H9 cells
were seeded at 40,000 cells/well in duplicate in the presence of serial two-fold dilutions of compounds
(range 200–1.56 µM) and incubated for 72 h. Cell viability was calculated by measuring cellular ATP as
a marker of metabolically active cells through a luciferase based chemical reaction and expressed as
the concentration that reduce cell viability by 50%.
3.5. ADME Assay
Chemicals. All solvents and reagents were from Sigma-Aldrich Srl (Milan, Italy). Dodecane
was purchased from Fluka (Milan, Italy). Pooled Male Donors 20 mg/mL HLM were from BD
Gentest-Biosciences (San Jose, California). Milli-Q quality water (Millipore, Milford, MA, USA)
was used. Hydrophobic filter plates (MultiScreen-IP, Clear Plates, 0.45 µm diameter pore size),
96-well microplates, and 96-well UV-transparent microplates were obtained from Millipore (Bedford,
MA, USA).
3.5.1. Parallel Artificial Membrane Permeability Assay (PAMPA)
Donor solution (0.5 mM) was prepared by diluting 1 mM dimethylsulfoxide (DMSO) compound
stock solution while using phosphate buffer (pH 7.4, 0.025 M). Filters were coated with 5
(w/v) dodecane solution of phosphatidylcholine for intestinal permeability. Donor solution (150
was added to each well of the filter plate. To each well of the acceptor plate was added 300 L of
µL of a 1%
µL)
µ
solution (50% DMSO in phosphate buffer). All of the compounds were tested in three different plates
on different days. The sandwich was incubated for 5 h at room temperature under gentle shaking.
After the incubation time, the plates were separated, and samples were taken from both receiver and
donor sides and analyzed while using LC with UV detection at 280 nm. LC analysis was performed
with a PerkinElmer (series 200) instrument that was equipped with an UV detector (PerkinElmer
785A, UV/vis Detector). Chromatographic separation was conducted using a Polaris C18 column
(150–4.6 mm, 5 µ
m particle size) at a flow rate of 0.8 mL min−1 with a mobile phase composed of 60%
ACN/40% H2O-formic acid 0.1% for all compounds. Permeability (Papp) was calculated according to
the following equation with some modification to obtain permeability values in cm/s,
VDVA
(VD + VA)At
Papp =
− ln(1 − r)
(1)
where VA is the volume in the acceptor well, VD is the volume in the donor well (cm3), A is the “effective
area” of the membrane (cm2), t is the incubation time (s), and r the ratio between drug concentration in
the acceptor and equilibrium concentration of the drug in the total volume(VD + VA).
Drug concentration is estimated by using the peak area integration. Membrane retentions (%)
were calculated according to the following equation:
[r − (D + A)]100
%MR =
(2)
Eq
where r is the ratio between drug concentration in the acceptor and equilibrium concentration, D, A,
and Eq represented drug concentration in the donor, acceptor, and equilibrium solution, respectively.
3.5.2. Water Solubility Assay
The appropriate (1 mg) was added to 1 mL of water. The sample was shaken in a shaker bath at
room temperature for 24–36 h. The suspensions were filtered through a 0.45 µm nylon filter (Acrodisc,

Molecules 2019, 24, 3988
15 of 18
Sigma Aldrich, Milan, Italy) and the solubilized compound determined by LC-MS-MS assay. The
determination was performed in triplicate. For the quantification, an LC-MS system consisting of a
Varian apparatus (Varian Inc., Palo Alto, CA, USA), including a vacuum solvent degassing unit, two
pumps (212-LC), a Triple Quadrupole MSD (Mod. 320-LC) mass spectrometer with ES interface, and
Varian MS Workstation System Control Vers. 6.9 software, was used. Chromatographic separation was
obtained while using a 3
µ
m particle size Pursuit C18 column (50
×
2.0 mm) (Varian). Column was
equilibrated in Buffer B (aqueous solution of 0.1% formic acid) and eluted with a linear increase from 0%
to 70% gradient of Buffer A (ACN) for 10 min. and subsequent increase up to 98% for additional 5 min.
The instrument operated in positive mode and the following parameters were used: injection volume
5 µL, flow rate 0.3 mL/min, detector 1850 V, drying gas pressure 25.0 psi, desolvation temperature
300.0 ◦C, nebulizing gas 45.0 psi, needle 5000 V, and shield 600 V. Nebulizer gas and drying gas was
Nitrogen. Argon was the collision gas at a pressure of 1.8 mTorr in the collision cell. Single compound
quantification was performed in comparison with standard calibration curves in methanol.
3.5.3. Microsomal Stability Assay
Each compound was incubated at a final concentration of 50
(final solution) DMSO for 60 min. at 37 ◦C under the following conditions: 125 mM phosphate buffer
(pH 7.4), 5 L of human liver microsomal protein (0.2 mg/mL) and NADPH-generating system. The
µM in a final volume of 0.5 mL in 2%
µ
reactions were stopped by adding 1.0 mL of acetonitrile and cooled in ice. Parent drug and metabolites
in the reaction mixtures were determined after centrifugation of the samples by LC-UV-MS.
An Agilent 1100 LC/MSD VL system (G1946C) (Agilent Technologies, Palo Alto, CA, USA) was
used for chromatographic analysis. A vacuum solvent degassing unit constituted the instrument, a
binary high-pressure gradient pump, an 1100 series UV detector, and an 1100 MSD model VL benchtop
mass spectrometer. A Varian Polaris C18-A column (150–4.6 mm, 5 µm particle size) was used under the
following conditions: eluent A: ACN; eluent B: aqueous solution of formic acid (0.1%); linear gradient
2–70% of eluent A for 12 min, then increased to 98% up to 20 min.; flow rate 0.8 mL min.-1; injection
volume 20 µL. The LC-ESI-MS determination was performed with Agilent 1100 series mass spectra
detection (MSD) single-quadrupole instrument in the positive ion mode and an orthogonal spray
API-ES (Agilent Technologies, Palo Alto, CA, USA). Nebulizing and drying gas was Nitrogen. Pressure
of the nebulizing gas 40 psi, flow of the drying gas 9 L/min, capillary voltage 3000 V, fragmentor
voltage 70 V, and vaporization temperature 350 ◦C. UV were monitored at 280 nm. Scan range for
spectra acquisition was m/z 100–1500 while using a step size of 0.1 u. The percentage of compound not
metabolized was determined by comparison with reference solutions.
4. Discussion
In the present paper, 15 novel inhibitors of the ATPase activity of the human helicase DDX3X
were designed, synthesized, and biologically characterized. The compounds were designed starting
from hits previously published, by replacing their rohdanine moiety, already reported in the list of
PAINS, with the 1,3,4-thiadiazole ring. As a result, nine compounds showed promising anti- enzymatic
activities varying from 1.5 µM to 35 µM. Compounds that were endowed of the most interesting
activities against the enzyme were then evaluated on HIV-1 infected H9 cells to discover potential
antiviral drugs. The antiviral screening led to the identification of seven antiviral compounds endowed
of activities ranging from 2.8
µM to 42
µM. Among them, compound 24 was characterized by the
best anti-HIV-1 activity of 2.8
µM and by a promising selectivity index (CC50 = 125
µM, SI = 45).
The ADME assays were finally performed to preliminary evaluate the pharmacokinetic parameters
of compounds and to rationalize results. Acid derivatives showed very good metabolic stability, in
contrast to their corresponding esters, which were rapidly metabolized into the acid precursors. The
aqueous solubility was found very promising; in fact, the values of the most active compounds were
below 6, as recommended for drug candidates. Finally, compounds were characterized by low but not
limiting passive permeability. Taking into account ADME results, the antiviral activities of the esters

Molecules 2019, 24, 3988
16 of 18
29 and 31 is probably due to their enhanced membrane permeability, followed by a cellular conversion
into compound 24. Caco-2 experiments will be performed in the due time to evaluate the involvement
of active transport mechanisms.
In conclusion, in the present work, we have successfully replaced the rhodanine moiety of
compound FE15 with 1,3,4-thiadiazole ring. This approach is useful in reducing the interferences in
assays that are generally associated with PAINS. The most promising derivative, compound 24, is
characterized by good inhibition of the ATPase activity of DDX3X protein and by promising anti-HIV-1
activity in a reference virus-cell system without signs of in vitro cytotoxicity. These data, together with
suitable in vitro PK properties, make inhibitor 24 a good starting point for further optimization.
Author Contributions: Conceptualization, G.M. and M.B.; Data curation, A.B. (Annalaura Brai), S.R., V.R., L.B.,
C.Z., M.B. (Matteo Borgini), C.I.T., A.G., A.B. (Adele Boccuto) and F.S.; Formal analysis, A.B. (Annalaura Brai), S.R.,
V.R., L.B., C.Z., M.B. (Matteo Borgini), C.I.T., A.G., A.B. (Adele Boccuto) and F.S.; Funding acquisition, G.M. and
M.B. (Maurizio Botta); Investigation, A.B. (Annalaura Brai), S.R., V.R., L.B., C.Z., M.B. (Matteo Borgini), C.I.T., A.G.,
C.P., A.B. (Adele Boccuto) and F.S.; Methodology, A.B. (Annalaura Brai), V.R. and M.Z.; Project administration,
G.M. and M.B. (Maurizio Botta); Supervision, M.Z., G.M. and M.B. (Maurizio Botta); Validation, A.B. (Annalaura
Brai), S.R., V.R., and M.Z.; Writing—original draft, A.B. (Annalaura Brai); Writing—review & editing, M.Z., G.M.
Notes: Dedicated to the memory of Maurizio Botta, full professor at the University of Siena, excellent chemist,
beloved master and friend.
Funding: This research was funded by First Health Pharmaceutical B.V; G.M. and V.R. were partially supported
by the CNR Project “Identification of novel molecules with therapeutic potential against Zika virus and other
emerging viruses”.
Acknowledgments: The pNL4-3 plasmid, the H9 and the TZM-bl cell lines were obtained through the AIDS
Reagent Program.
Conflicts of Interest: The authors declare no conflict of interest.
References
1.
2.
3.
Soto-Rifo, R.; Ohlmann, T. The role of the DEAD-box RNA helicase DDX3 in mRNA metabolism.
Wiley Interdiscip. Rev. RNA 2013, 4, 369–385. [CrossRef] [PubMed]
Yedavalli, V.S.R.K.; Neuveut, C.; Chi, Y.-H.; Kleiman, L.; Jeang, K.-T. Requirement of DDX3 DEAD box RNA
helicase for HIV-1 Rev-RRE export function. Cell 2004, 119, 381–392. [CrossRef] [PubMed]
Ishaq, M.; Hu, J.; Wu, X.; Fu, Q.; Yang, Y.; Liu, Q.; Guo, D. Knockdown of cellular RNA helicase DDX3 by
short hairpin RNAs suppresses HIV-1 viral replication without inducing apoptosis. Mol. Biotechnol. 2008, 39,
231–238. [CrossRef] [PubMed]
4.
5.
6.
7.
8.
Owsianka, A.M.; Patel, A.H. Hepatitis C virus core protein interacts with a human DEAD box protein DDX3.
Virology 1999, 257, 330–340. [CrossRef]
Ariumi, Y.; Kuroki, M.; Abe, K.I.; Dansako, H.; Ikeda, M.; Wakita, T.; Kato, N. DDX3 DEAD-Box RNA
Helicase Is Required for Hepatitis C Virus RNA Replication. J. Virol. 2007, 81, 13922–13926. [CrossRef]
Upadya, M.H.; Aweya, J.J.; Tan, Y.J. Understanding the interaction of hepatitis C virus with host DEAD-box
RNA helicases. World J. Gastroenterol. 2014, 20, 2913–2926. [CrossRef]
Chahar, H.S.; Chen, S.; Manjunath, N. P-body components LSM1, GW182, DDX3, DDX6 and XRN1 are
recruited to WNV replication sites and positively regulate viral replication. Virology 2013, 436, 1–7. [CrossRef]
Li, C.; Ge, L.; Li, P.; Wang, Y.; Dai, J.; Sun, M.; Huang, L.; Shen, Z.; Hu, X.; Ishag, H.; et al. Cellular DDX3
regulates Japanese encephalitis virus replication by interacting with viral un-translated regions. Virology
2014, 449, 70–81. [CrossRef]
9.
Park, S.H.; Lee, S.G.; Kim, Y.; Song, K. Assignment of a human putative RNA helicase gene, DDX3, to human
X chromosome bands p11.3→p11.23. Cytogenet. Cell Genet. 1998, 81, 178–179. [CrossRef]
10. Högbom, M.; Collins, R.; van den Berg, S.; Jenvert, R.-M.; Karlberg, T.; Kotenyova, T.; Flores, A.;
Hedestam, G.B.K.; Schiavone, L.H. Crystal Structure of Conserved Domains 1 and 2 of the Human
DEAD-box Helicase DDX3X in Complex with the Mononucleotide AMP. J. Mol. Biol. 2007, 372, 150–159.
[CrossRef]

Molecules 2019, 24, 3988
17 of 18
11. Radi, M.; Falchi, F.; Garbelli, A.; Samuele, A.; Bernardo, V.; Paolucci, S.; Baldanti, F.; Schenone, S.; Manetti, F.;
Maga, G.; et al. Discovery of the first small molecule inhibitor of human DDX3 specifically designed to
target the RNA binding site: Towards the next generation HIV-1 inhibitors. Bioorg. Med. Chem. Lett. 2012, 22,
2094–2098. [CrossRef] [PubMed]
12. Fazi, R.; Tintori, C.; Brai, A.; Botta, L.; Selvaraj, M.; Garbelli, A.; Maga, G.; Botta, M. Homology Model-Based
Virtual Screening for the Identification of Human Helicase DDX3 Inhibitors. J. Chem. Inf. Model. 2015, 55,
2443–2454. [CrossRef] [PubMed]
13. Brai, A.; Fazi, R.; Tintori, C.; Zamperini, C.; Bugli, F.; Sanguinetti, M.; Stigliano, E.; Esté, J.; Badia, R.; Franco, S.;
et al. Human DDX3 protein is a valuable target to develop broad spectrum antiviral agents. Proc. Natl. Acad.
Sci. USA 2016, 113, 5388–5393. [CrossRef] [PubMed]
14. Brai, A.; Martelli, F.; Riva, V.; Garbelli, A.; Fazi, R.; Zamperini, C.; Pollutri, A.; Falsitta, L.; Ronzini, S.;
Maccari, L.; et al. DDX3X Helicase Inhibitors as a New Strategy To Fight the West Nile Virus Infection.
J. Med. Chem. 2019, 62, 2333–2347. [CrossRef]
15. Maga, G.; Falchi, F.; Garbelli, A.; Belfiore, A.; Witvrouw, M.; Manetti, F.; Botta, M. Pharmacophore
modeling and molecular docking led to the discovery of inhibitors of human immunodeficiency Virus-1
replication targeting the human cellular aspartic acid
3. J. Med. Chem. 2008, 51, 6635–6638. [CrossRef]
−
glutamic acid
−
alanine aspartic acid box polypeptide
−
16. Yedavalli, V.S.R.K.; Zhang, N.; Cai, H.; Zhang, P.; Starost, M.F.; Hosmane, R.S.; Jeang, K.-T. Ring expanded
nucleoside analogues inhibit RNA helicase and intracellular human immunodeficiency virus type 1 replication.
J. Med. Chem. 2008, 51, 5043–5051. [CrossRef]
17. Maga, G.; Falchi, F.; Radi, M.; Botta, L.; Casaluce, G.; Bernardini, M.; Irannejad, H.; Manetti, F.; Garbelli, A.;
Samuele, A.; et al. Toward the discovery of novel Anti-HIV Drugs. Second-Generation inhibitors of the
cellular ATPase DDX3 with improved Anti-HIV activity: Synthesis, structure-activity relationship analysis,
cytotoxicity studies, and target validation. Chem. Med. Chem. 2011, 6, 1371–1389. [CrossRef]
18. Xie, M.; Vesuna, F.; Botlagunta, M.; Bol, G.M.; Irving, A.; Bergman, Y.; Hosmane, R.S.; Kato, Y.; Winnard, P.T.;
Raman, V. NZ51, a ring-expanded nucleoside analog, inhibits motility and viability of breast cancer cells by
targeting the RNA helicase DDX3. Oncotarget 2015, 6, 29901–29913. [CrossRef]
19. Bol, G.M.; Vesuna, F.; Xie, M.; Zeng, J.; Aziz, K.; Gandhi, N.; Levine, A.; Irving, A.; Korz, D.; Tantravedi, S.;
et al. Targeting DDX3 with a small molecule inhibitor for lung cancer therapy. EMBO Mol. Med. 2015, 7,
648–669. [CrossRef]
20. Xie, M.; Vesuna, F.; Tantravedi, S.; Bol, G.M.; Heerma van Voss, M.R.; Nugent, K.; Malek, R.; Gabrielson, K.;
van Diest, P.J.; Tran, P.T.; et al. RK-33 Radiosensitizes prostate cancer cells by blocking the RNA helicase
DDX3. Cancer Res. 2016, 76, 6340–6350. [CrossRef]
21. Kondaskar, A.; Kondaskar, S.; Kumar, R.; Fishbein, J.C.; Muvarak, N.; Lapidus, R.G.; Sadowska, M.;
Edelman, M.J.; Bol, G.M.; Vesuna, F.; et al. Novel, Broad spectrum anticancer agents containing the tricyclic
5:7:5-fused diimidazodiazepine ring system. ACS Med. Chem. Lett. 2011, 2, 252–256. [CrossRef] [PubMed]
22. Samal, S.K.; Routray, S.; Veeramachaneni, G.K.; Dash, R.; Botlagunta, M. Ketorolac salt is a newly discovered
DDX3 inhibitor to treat oral cancer. Sci. Rep. 2015, 5, 9982. [CrossRef] [PubMed]
23. Baell, J.B.; Holloway, G.A. New substructure filters for removal of pan assay interference compounds (PAINS)
from screening libraries and for their exclusion in bioassays. J. Med. Chem. 2010, 53, 2719–2740. [CrossRef]
[PubMed]
24. Tomašic´, T.; Peterlin Mašicˇ, L. Rhodanine as a scaffold in drug discovery: A critical review of its biological
activities and mechanisms of target modulation. Expert Opin. Drug Discov. 2012, 7, 549–560. [CrossRef]
[PubMed]
25. Li, Y.; Geng, J.; Liu, Y.; Yu, S.; Zhao, G. Thiadiazole-a promising structure in medicinal chemistry. Chem. Med.
Chem. 2013, 8, 27–41. [CrossRef]

Molecules 2019, 24, 3988
18 of 18
26. Saladini, F.; Giannini, A.; Boccuto, A.; Vicenti, I.; Zazzi, M. Agreement between an in-house replication
competent and a reference replication defective recombinant virus assay for measuring phenotypic resistance
to HIV-1 protease, reverse transcriptase, and integrase inhibitors. J. Clin. Lab. Anal. 2018, 32, e22206.
[CrossRef]
Sample Availability: Samples of the compounds 23, 24 and 29 are available from the authors.
©
2019 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access
article distributed under the terms and conditions of the Creative Commons Attribution
(CC BY) license (http://creativecommons.org/licenses/by/4.0/).