Basic Information | Post buying leads | Suppliers |
Name |
Selenophos |
EINECS | N/A |
CAS No. | 10161-84-9 | Density | g/cm3 |
PSA | N/A | LogP | N/A |
Solubility | N/A | Melting Point |
N/A |
Formula | C10H24 N O2 P Se | Boiling Point | 327.7°Cat760mmHg |
Molecular Weight | 300.24 | Flash Point | 152°C |
Transport Information | N/A | Appearance | N/A |
Safety | Poison by subcutaneous route. When heated to decomposition it emits toxic fumes of NOx, POx, and Se. | Risk Codes | N/A |
Molecular Structure | Hazard Symbols | N/A | |
Synonyms |
Ethaneselenol,2-(diethylamino)-, Se-ester with O-ethyl ethylphosphonoselenoate (8CI);Selenophos |
Selenophos with CAS register number of 10161-84-9 is called for BRN 2361501 ; CID202353 ; LS-107038 ; O-Ethyl Se-(2-diethylaminoethyl)phosphonoselenoate ; Phosphonoselenoic acid, ethyl-, Se-(2-(diethylamino)ethyl) O-ethyl ester ,and so on.
IUPAC Name: 2-[Ethoxy(ethyl)phosphoryl]selanyl-N,N-diethylethanamine
CAS: 10161-84-9
Molecular formula: C10H24NO2PSe
Molecular weight: 300.2368
Molecular structure:
ACD/LogP: 2.26
#H bond acceptors: 3
#H bond donors: 0
#Freely Rotating Bonds: 9
Flash Point: 152 °C
Enthalpy of Vaporization: 57 kJ/mol
Boiling Point: 327.7 °C at 760 mmHg
Vapour Pressure: 0.000199 mmHg at 25°C
Selenophos (CAS No.10161-84-9) is usually thought to be used as chemical reagent.
1. | scu-mus LD50:21 µg/kg | JMCMAR Journal of Medicinal Chemistry. 10 (1967),115. |
Poison by subcutaneous route. When heated to decomposition it emits toxic fumes of NOx, POx, and Se.
OSHA PEL: TWA 0.2 mg(Se)/m3
ACGIH TLV: TWA 0.2 mg(Se)/m3
Removal in wastewater treatment of Selenophos (CAS No.10161-84-9) can be stated as follows:
Total removal:1.90 percent
Total biodegradation:0.09 percent
Total sludge adsorption:1.80 percent
Total to Air:0.00 percent
(using 10000 hr Bio P,A,S)