The Silane,chlorodimethyl(1-methylethyl)-, with the CAS registry number 3634-56-8, has the systmatic name of chloro(dimethyl)(1-methylethyl)silane. It belongs to the following product categories: Alkyldimethylsilylation (GC Derivatizing Reagents); Analytical Chemistry; GC Derivatizing Reagents; Monochlorosilanes; Si (Classes of Silicon Compounds); Si-Cl Compounds; Silylation (GC Derivatizing Reagents). And the molecular formula of the chemical is C₅H₁₃ClSi.

The characteristics of Silane,chlorodimethyl(1-methylethyl)- are as followings: (1)ACD/LogP: 3.05; (2)# of Rule of 5 Violations: 0; (3)ACD/LogD (pH 5.5): 3.05; (4)ACD/LogD (pH 7.4): 3.05; (5)ACD/BCF (pH 5.5): 123.29; (6)ACD/BCF (pH 7.4): 123.29; (7)ACD/KOC (pH 5.5): 1092.16; (8)ACD/KOC (pH 7.4): 1092.16; (9)#H bond acceptors: 0; (10)#H bond donors: 0; (11)#Freely Rotating Bonds: 1; (12)Polar Surface Area: 0 Å²; (13)Index of Refraction: 1.403; (14)Molar Refractivity: 38.73 cm³; (15)Molar Volume: 158.5 cm³; (16)Polarizability: 15.35×10^-24cm³; (17)Surface Tension: 17.8 dyne/cm; (18)Density: 0.862 g/cm³; (19)Flash Point: 15 °C; (20)Enthalpy of Vaporization: 33.35 kJ/mol; (21)Boiling Point: 109.2 °C at 760 mmHg; (22)Vapour Pressure: 29.4 mmHg at 25°C. 

Uses of Silane,chlorodimethyl(1-methylethyl)-: It can react with geranyl trimethylsilyl ether to produce (3,7-dimethyl-octa-2,6-dienyl)-isopropyl-dimethyl-silane. This reaction will need reagent Li, and the menstruum tetrahydrofuran. And the yield is about 95%.

You should be cautious while dealing with this chemical. It is a kind of flammble chemical which may cause burns and irritates to respiratory system. Therefore, you had better take the following instructions: Keep away from sources of ignition - No smoking; Wear suitable protective clothing, gloves and eye/face protection, and if in case of contacting with eyes, rinse immediately with plenty of water and seek medical advice; In case of accident or if you feel unwell, seek medical advice immediately (show label where possible).

Addtionally, the following datas could be converted into the molecular structure:
(1)SMILES: Cl[Si](C(C)C)(C)C
(2)InChI: InChI=1/C5H13ClSi/c1-5(2)7(3,4)6/h5H,1-4H3
(3)InChIKey: YCXVDEMHEKQQCI-UHFFFAOYAP