Products Categories
| CAS No.: | 82-75-7 |
|---|---|
| Name: | Peri acid |
| Article Data: | 12 |
| Molecular Structure: | |
|
|
|
| Formula: | C10H9NO3S |
| Molecular Weight: | 223.252 |
| Synonyms: | 8-Amino-1-naphthalenesulfonic acid;1-Aminonaphthalene-8-sulfonic acid;CCRIS 8906;NSC 7798;Schollkopf's acid;8-Aminonaphthalene-1-sulfonic acid; |
| EINECS: | 201-437-1 |
| Density: | 1.502 g/cm3 |
| Melting Point: | >350 °C |
| Boiling Point: | 220°C (rough estimate) |
| Solubility: | Soluble in glacial acetic acid, slightly soluble in hot water. |
| Appearance: | White needle crystal |
| Hazard Symbols: |
 C
|
| Risk Codes: | 34 |
| Safety: | 26-27-36-45 |
| Transport Information: | UN 3261 8 PG/ 3 |
| PSA: | 88.77000 |
| LogP: | 3.33070 |
- 82993-81-5D-threo-Ritalinic acid hydrochloride
- 852475-26-4MC1568
- 958254-66-51H-Imidazo[4,5-b]pyridine-2-carboxaldehyde, 1-methyl-, hydrochloride
- 99170-93-1N-Methyl-2-oxazolamine
- 914458-26-7[5-(2-fluorophenyl)-1-pentyl-1H-pyrrol-3-yl]-1-naphthalenyl-Methanone
- 894852-01-87-BROMO-2,2-DIMETHYL-2H-PYRIDO[3,2-B][1,4]OXAZIN-3(4H)-ONE
- 90221-55-92-bromo-5-methylbenzaldehyde
- 885590-99-82,3-DIFLUORO-4-IODOBENZALDEHYDE
- 97730-31-9(S)-4'-(2-Methylbutyl)Biphenyl-4-Carbonitrile
- 926293-55-26-Bromo-2-methylpyridine-3-carboxaldehyde
What can I do for you?
Get Best Price
Specification
The Peri acid with CAS registry number of 82-75-7 is also known as 1-Aminonaphthalene-8-sulfonic acid. The IUPAC name is 8-Aminonaphthalene-1-sulfonic acid. It belongs to product categories of Intermediates of Dyes and Pigments. Its EINECS registry number is 201-437-1. In addition, the formula is C10H9NO3S and the molecular weight is 223.25. This chemical is a white needle crystal and should be sealed in dry, dark place.
Physical properties about Peri acid are: (1)ACD/LogP: 0.42; (2)ACD/LogD (pH 5.5): -3.06; (3)ACD/LogD (pH 7.4): -3.08; (4)ACD/BCF (pH 5.5): 1; (5)ACD/BCF (pH 7.4): 1; (6)ACD/KOC (pH 5.5): 1; (7)ACD/KOC (pH 7.4): 1; (8)#H bond acceptors: 4; (9)#H bond donors: 3; (10)#Freely Rotating Bonds: 2; (11)Index of Refraction: 1.713; (12)Molar Refractivity: 58.27 cm3; (13)Molar Volume: 148.6 cm3; (14)Surface Tension: 72.1 dyne/cm; (15)Density: 1.502 g/cm3.
Preparation of Peri acid: it is prepared by reaction of refined naphthalene. The product is obtained by sulfonation, nitration, neutralization with magnesium carbonate, iron reduction, acid analysis and filtration. In the reaction, reaction mixture is concentrated to a certain concentration, cooled to 30-32 °C and filtered. Then the filtrate is partial acidified with sulfuric acid at the temperature of 40-45 °C for 12 hours. At last, the filtrate is dealed with acid to get the product.
Uses of Peri acid: it is used as dye intermediate and is used to produce naphth[1,8-cd][1,2]oxathiol-2,2-dioxide. The reaction occurs with reagents NaNO2, aq. HCl and solvent H2O with other condition of heating for 1 hour. The yield is about 92%.
![Peri acid is used to produce naphth[1,8-cd][1,2]oxathiol-2,2-dioxide.](/UserFilesUpload/Uses of Peri acid.png)
When you are using this chemical, please be cautious about it. As a chemical, it can cause burns. During using it, wear suitable protective clothing. After using it, take off immediately all contaminated clothing. If contact with eyes accidently, rinse immediately with plenty of water and seek medical advice. In case of accident or if you feel unwell seek medical advice immediately.
You can still convert the following datas into molecular structure:
1. Canonical SMILES: C1=CC2=C(C(=C1)N)C(=CC=C2)S(=O)(=O)O
2. InChI: InChI=1S/C10H9NO3S/c11-8-5-1-3-7-4-2-6-9(10(7)8)15(12,13)14/h1-6H,11H2,(H,12,13,14)
3. InChIKey: CYJJLCDCWVZEDZ-UHFFFAOYSA-N