Products Categories
CAS No.: | 95-21-6 |
---|---|
Name: | 2-Methylbenzoxazole |
Article Data: | 144 |
Molecular Structure: | |
Formula: | C8H7NO |
Molecular Weight: | 133.15 |
Synonyms: | 2-Methyl-1,3-benzoxazole;2-Methylbenzo[d]oxazole;NSC 3824; |
EINECS: | 202-399-9 |
Density: | 1.149 g/cm3 |
Melting Point: | 5-10 °C(lit.) |
Boiling Point: | 200.5 °C at 760 mmHg |
Flash Point: | 75 °C |
Solubility: | immiscible with water |
Appearance: | clear colourless to yellow liquid |
Hazard Symbols: | Xn,Xi,C |
Risk Codes: | 22-36/37/38-41-37/38-34-20/21/22 |
Safety: | 26-36/37/39-37/39-45-27 |
Transport Information: | UN 1760 |
PSA: | 26.03000 |
LogP: | 2.13620 |
2-METHYLBENZOXAZOLE(95-21-6) is used for the dye, medicine and synthesis of organic compounds
1. | skn-rbt 500 mg/24H SEV | 28ZPAK Sbornik Vysledku Toxixologickeho Vysetreni Latek A Pripravku Marhold, J.V.,Institut Pro Vychovu Vedoucicn Pracovniku Chemickeho Prumyclu Praha,Czechoslovakia.: 1972,157. | ||
2. | eye-rbt 250 µg/24H SEV | 28ZPAK Sbornik Vysledku Toxixologickeho Vysetreni Latek A Pripravku Marhold, J.V.,Institut Pro Vychovu Vedoucicn Pracovniku Chemickeho Prumyclu Praha,Czechoslovakia.: 1972,157. | ||
3. | orl-mus LD40:1100 mg/kg | JACSAT Journal of the American Chemical Society. 67 (1945),905. | ||
4. | ipr-mus LD50:400 mg/kg | NTIS** National Technical Information Service. (Springfield, VA 22161) (Formerly U.S. Clearinghouse for Scientific and Technical Information) No. AD277-689 . |
mouse LD40 oral 1100mg/kg (1100mg/kg) Journal of the American Chemical Society. Vol. 67, Pg. 905, 1945.
mouse LD50 intraperitoneal 400mg/kg (400mg/kg) National Technical Information Service. Vol. AD277-689,
Stability: Stable under normal temperatures and pressures. but keep away from strong oxidizing agents, direct light, heat.
Storage:Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from light.
Handling:Wash thoroughly after handling. Use only in a well ventilated area.Do not get in eyes, on skin, or on clothing.Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.