1143018-85-2

Upstream product

• 104-88-1 4-chlorobenzaldehyde 
• 587-04-2 m-Chlorobenzaldehyde 
• 25015-63-8 4,4,5,5-tetramethyl-[1,3,2]-dioxaboralane 
• 7335-27-5 ethyl 4-chlorobenzoate 
• 619-56-7 4-chlorobenzamide 
• 6833-15-4 4-chlorobenzanilide 
• 20386-93-0 4-chlorobenzyl benzoate 
• 1126-46-1 Methyl 4-chlorobenzoate 
• 67483-73-2 benzyl p-chlorobenzoate 
• 74-11-3 para-chlorobenzoic acid 
• 99-91-2 para-chloroacetophenone 

Downstream Products

• 873-76-7 para-Chlorobenzyl alcohol 

Relevant academic research and scientific papers

Nucleophilic Addition and α-C-H Substitution Reactions of an Imine Mediated by Dibutylmagnesium and Organolithium Reagents

A series of nucleophilic addition reactions and α-C-H substitution reactions of an imine-containing ligand 2-(2-((((1H-pyrrol-2-yl)methylene)amino)methyl)-1H-pyrrol-1-yl)-N,N-dimethylethan-1-amine (HL1) were reported. The reactions of HL1 with 0.5 and 2 equiv ofnBu2Mg, respectively, gave two complexes of compositions [Mg(L1)2] (1) and [Mg2(L2)2] (2) (H2L2 =N-((1-(2-(dimethylamino)ethyl)-1H-pyrrol-2-yl)methyl)-1-(1H-pyrrol-2-yl)pentan-1-amine). The nucleophilic addition ofnBu2Mg to the C═N bond of the HL1 ligand occurred in the process for the formation of2. Treatment of HL1 with 2 and 1 equiv ofnBuLi generated [Li2(L3)2] (3) (HL3 = 2-(2-(((1-(1H-pyrrol-2-yl)pentylidene)amino)methyl)-1H-pyrrol-1-yl)-N,N-dimethylethan-1-amine) and [Li2(L1)2] (4). An α-C-H substitution of the HC═NR moiety of the HL1 ligand triggered bynBuLi was discovered in the preparation of3. The formation of3demonstrates a new concept for the C-C coupling that involved inert C-H bond activation of HC═NR skeleton. The reactions of HL1 with MeLi,sec-BuLi, and tert-BuLi, respectively, were also examined. The products for both the nucleophilic addition of organolithium reagents to the C═N bond and α-C-H substitution of the HC═NR moiety of the HL1 ligand were determined. The mechanisms for the formations of2and3were rationalized by DFT calculations. The hydroboration reactions catalyzed by2were investigated, and these reactions characterize ample substrate scope, very good yields, and high selectivity.

Hydroborative reduction of amides to amines mediated by La(CH2C6H4NMe2-: O)3

The deoxygenative reduction of amides to amines is a great challenge for resonance-stabilized carboxamide moieties, although this synthetic strategy is an attractive approach to access the corresponding amines. La(CH2C6H4NMe2-o)3, a simple and easily accessible lanthanide complex, was found to be highly efficient not only for secondary and tertiary amide reduction, but also for the most challenging primary reduction with pinacolborane. This protocol exhibited good tolerance for many functional groups and heteroatoms, and could be applied to gram-scale synthesis. The active species in this catalytic cycle was likely a lanthanide hydride.

Catalytic Hydroboration of Esters by Versatile Thorium and Uranium Amide Complexes

The challenging hydroboration of esters is achieved using simple uranium and thorium amides, U[N(SiMe3)2]3 and [(Me3Si)2N]2An[κ2-(N,C)-CH2Si(CH3)2N(SiMe3)] (An = Th or U) acting as precatalysts in the reaction with pinacolborane (HBpin). All three complexes showed impressive catalytic activities, reaching excellent yields. A large scope of esters was investigated including aliphatic, aromatic, and heterocyclic esters that were transformed cleanly to the corresponding hydroborated alcohols, which readily hydrolyzed to the free alcohols. Moreover, the actinide catalysts demonstrated unexpected high functional tolerance toward nitro, halide, cyano, and heteroaromatic functional groups. The reaction exhibited excellent selectivity toward the ester when additional double and triple unsaturated C-C bonds were present. Lactones and poly caprolactone have been successfully cleaved to the monomeric units, showing a great promise toward polymer degradation and recycling. Detailed kinetic studies are provided in order to determine the rate dependence on the concentration of catalyst, HBpin, and ester. A plausible mechanism is proposed based on stoichiometric reactions, DFT calculations, thermodynamic measurements, and deuterium-labeling studies.

Silver-Catalyzed Hydroboration of C-X (X = C, O, N) Multiple Bonds

AgSbF6 was developed as an effective catalyst for the hydroboration of various unsaturated functionalities (nitriles, alkenes, and aldehydes). This atom-economic chemoselective protocol works effectively under low catalyst loading, base- A nd solvent-free moderate conditions. Importantly, this process shows excellent functional group tolerance and compatibility with structurally and electronically diverse substrates (>50 examples). Mechanistic investigations revealed that the reaction proceeds via a radical pathway. Further, the obtained N,N-diborylamines were showcased to be useful precursors for amide synthesis.

METHOD FOR PREPARING BORATE ESTER ON BASIS OF TRICYCLOPENTADIENYL RARE EARTH METAL COMPLEX

Disclosed is a method for preparing a borate ester on the basis of a tricyclopentadienyl rare earth metal complex, the method comprising the following steps: uniformly stirring and mixing a catalyst, a borane and a carbonyl compound for reaction to prepar

CeO2-nanocubes as efficient and selective catalysts for the hydroboration of carbonyl groups

The CeO2-nanoparticle catalysed hydroboration of carbonyl compounds with HBpin (pin = OCMe2CMe2O) is reported to afford the corresponding borate esters in excellent yield. A series of aromatic and aliphatic aldehydes and ketones having synthetically important functional groups were well-Tolerated under mild reaction conditions. Further, chemoselective hydroboration of aldehydes over other reducible functional groups such as ketone, nitrile, hydroxide, alkene, alkyne, amide, ester, nitro, and halides was achieved. Importantly the catalyst can be recycled up to ten runs with slight loss in activity. This journal is

Hydroboration of carbonyls and imines by an iminophosphonamido tin(ii) precatalyst

A novel three-coordinated tin(ii) chloride [Ph2P(NtBu)2]SnCl (1) supported by an N,N′-di-tert-butyliminophosphonamide having two phenyl groups on the phosphorus atom was synthesized by the reaction of the starting lithium iminophosphonamide [Ph2P(NtBu)2]L

Manganese-Catalyzed Hydroborations with Broad Scope

Reductive transformations of easily available oxidized matter are at the heart of synthetic manipulation and chemical valorization. The applications of catalytic hydrofunctionalization benefit from the use of liquid reducing agents and operationally facile setups. Metal-catalyzed hydroborations provide a highly prolific platform for reductive valorizations of stable C=X electrophiles. Here, we report an especially facile, broad-scope reduction of various functions including carbonyls, carboxylates, pyridines, carbodiimides, and carbonates under very mild conditions with the inexpensive pre-catalyst Mn(hmds)2. The reaction could be successfully applied to depolymerizations.

Homoleptic Zinc-Catalyzed Hydroboration of Aldehydes and Ketones in the Presence of HBpin

Here, we report the reaction between N-phenyl-o-phenylenediamine and pyrrole-2-carboxaldehyde to afford the N-phenyl-o-phenyl-enediiminopyrrole ligand {L-H2} in quantitative yield. A one-pot reaction between {L-H2} and diethylzinc (ZnEt2) in a 2:1 ratio afforded the homoleptic zinc metal complex [{L-H}2Zn] (1). The solid-state structures of ligand {L-H2} and zinc complex 1 were confirmed using X-ray crystallography. Further, complex 1 was used for chemoselective hydroboration of aldehydes and ketones in the presence of pinacolborane (HBpin) at ambient temperature to produce the corresponding boronate esters in high yield.

1-D manganese(ii)-terpyridine coordination polymers as precatalysts for hydrofunctionalisation of carbonyl compounds

Reductive catalysis with earth-abundant metals is currently of increasing importance and shows potential in replacing precious metal catalysis. In this work, we revealed catalytic hydroboration and hydrosilylation of ketones and aldehydes achieved by a structurally defined manganese(ii) coordination polymer (CP) as a precatalyst under mild conditions. The manganese-catalysed methodology can be applied to a range of functionalized aldehydes and ketones with turnover numbers (TON) of up to 990. Preliminary results on the regioselective catalytic hydrofunctionalization of styrenes by the Mn-CP catalyst are also presented.