12680-49-8

Usage

Uses

Used in Water Treatment and Oil Drilling Industry:
Sodium molybdate is used as a corrosion inhibitor to prevent the degradation of metal surfaces in contact with water and oil, thereby extending the lifespan of equipment and infrastructure.
Used in Agriculture:
Sodium molybdate is used as a source of molybdenum in agricultural fertilizers and animal feed supplements, enhancing the nutritional value and promoting the health and productivity of crops and livestock.
Used in Ceramics, Pigments, and Dyes Production:
Sodium molybdate is utilized as a key ingredient in the manufacturing process of ceramics, pigments, and dyes, contributing to their color, stability, and performance.
Used as a Food Additive:
Sodium molybdate is employed as a nutrient supplement in the food industry to prevent molybdenum deficiency in humans and animals, ensuring optimal health and physiological function.
It is crucial to handle sodium molybdate with care due to its potential to cause irritation to the skin, eyes, and respiratory system if proper safety measures are not adhered to.

InChI:InChI=1/Mo.2Na.4O/q;2*+1;4*-2

Related news

Corrosion inhibition of copper, mild steel and galvanically coupled copper-mild steel in artificial sea water in presence of 1H-benzotriazole, SODIUM MOLYBDATE (cas 12680-49-8) and sodium phosphate08/29/2019

In this study, the corrosion inhibition of 1H-benzotriazole (BTA) alone and in combination with Na2MoO4·2H2O and Na3PO4·12H2O on single and coupled copper and mild steel in artificial sea water is evaluated. EIS and polarization results in stagnant and laminar flow conditions in different imme...detailed

Encapsulation and incorporation of SODIUM MOLYBDATE (cas 12680-49-8) in polyurethane coatings and study of its corrosion inhibition on mild steel08/28/2019

Sodium molybdate is evaluated as corrosion inhibitor for steel in brackish water; it is encapsulated by interfacial polymerization and the produced capsules are characterized. Electrochemical impedance spectroscopy and corrosion potential measurements were used to determine the short-time corros...detailed

Inhibitive effect of SODIUM MOLYBDATE (cas 12680-49-8) on the corrosion behavior of galvanized steel in simulated concrete pore solution08/27/2019

To limit rapid dissolution of zinc and hydrogen evolution of zinc coating in fresh concrete environments at the early stage, the corrosion inhibition of sodium molybdate for galvanized steel in simulated concrete pore solutions with/without chloride ion addition was studied. The inhibitive effec...detailed

Removal of tungsten from the SODIUM MOLYBDATE (cas 12680-49-8) solution using nascent MnO208/26/2019

Tungsten is hard to be separated effectively from molybdate solution due to their extremely similar chemical properties. In this research, a novel tungsten removal method was developed to remove tungsten from the molybdate solution using nascent MnO2. Through comparing different preparation meth...detailed

A two-generation reproductive toxicity study of SODIUM MOLYBDATE (cas 12680-49-8) dihydrate administered in drinking water or diet to Sprague-Dawley rats08/25/2019

In an OECD Test Guideline 416 multigenerational study, groups of 24 male and 24 female Sprague-Dawley rats were administered sodium molybdate dihydrate at 0, 5, 17, or 40 mg molybdenum (Mo)/kg bw/day in the drinking water or 40 mg Mo/kg bw/day in the diet over two generations to assess reproduct...detailed