Encapsulation and incorporation of SODIUM MOLYBDATE (cas 12680-49-8) in polyurethane coatings and study of its corrosion inhibition on mild steel

Add time:08/28/2019    Source:sciencedirect.com

SODIUM MOLYBDATE (cas 12680-49-8) is evaluated as corrosion inhibitor for steel in brackish water; it is encapsulated by interfacial polymerization and the produced capsules are characterized. Electrochemical impedance spectroscopy and corrosion potential measurements were used to determine the short-time corrosion inhibition while polarization curves were used for the estimation of the inhibition efficiency. The capsules composition, the Na2MoO4 content and the release rate are then determined. Na2MoO4 shows corrosion inhibition for at least 15 h. Capsules consist of polyurea and polyurethane which are formed due to the reaction of the isocyanates with the water of the emulsion and the used surfactants, respectively. Most of the inhibitor is released within 90 min. Electrochemical Impedance Spectroscopy and Scanning Vibrating Electrode Technique show corrosion inhibition on artificially damaged areas for the coatings containing the corrosion inhibitor capsules.

We also recommend Trading Suppliers and Manufacturers of SODIUM MOLYBDATE (cas 12680-49-8). Pls Click Website Link as below: cas 12680-49-8 suppliers

Prev:Inhibitive effect of SODIUM MOLYBDATE (cas 12680-49-8) on the corrosion behavior of galvanized steel in simulated concrete pore solution
Next:Corrosion inhibition of copper, mild steel and galvanically coupled copper-mild steel in artificial sea water in presence of 1H-benzotriazole, SODIUM MOLYBDATE (cas 12680-49-8) and sodium phosphate)