19102-07-9Relevant articles and documents
One step of palladium catalyzed benzodioxane ring C-O bond formation, synthesis of isoamericanol A and isoamericanin A
Jing, Xiaobi,Shi, Yaocheng,Liu, Yonghong,Han, Ying,Yan, Chaoguo,Wang, Li
, p. 1723 - 1727 (2004)
A number of benzodioxane compounds were synthesized using the palladium-catalyzed etherification of aryl halides by employing triphenylphosphane ligands. This method was used as key step in the synthesis of two natural products isoamericanol A and isoamericanin A.
Development of a Potent Brain-Penetrant EGFR Tyrosine Kinase Inhibitor against Malignant Brain Tumors
Tsang, Jonathan E.,Urner, Lorenz M.,Kim, Gyudong,Chow, Kingsley,Baufeld, Lynn,Faull, Kym,Cloughesy, Timothy F.,Clark, Peter M.,Jung, Michael E.,Nathanson, David A.
supporting information, p. 1799 - 1809 (2020/11/09)
The epidermal growth factor receptor (EGFR) is genetically altered in nearly 60% of glioblastoma tumors; however, tyrosine kinase inhibitors (TKIs) against EGFR have failed to show efficacy for patients with these lethal brain tumors. This failure is attributed to the inability of clinically tested EGFR TKIs to cross the blood-brain barrier (BBB) and achieve adequate pharmacological levels to inhibit various oncogenic forms of EGFR that drive glioblastoma. Through SAR analysis, we developed compound 5 (JCN037) from an anilinoquinazoline scaffold by ring fusion of the 6,7-dialkoxy groups to reduce the number of rotatable bonds and polar surface area and by introduction of an ortho-fluorine and meta-bromine on the aniline ring for improved potency and BBB penetration. Relative to the conventional EGFR TKIs erlotinib and lapatinib, JCN037 displayed potent activity against EGFR amplified/mutant patient-derived cell cultures, significant BBB penetration (2:1 brain-to-plasma ratio), and superior efficacy in an EGFR-driven orthotopic glioblastoma xenograft model.
Zn-catalyzed cyanation of aryl iodides
Zhao, Lulu,Dong, Yanan,Xia, Qiangqiang,Bai, Jianfei,Li, Yuehui
, p. 6471 - 6477 (2020/06/08)
We report the first example of zinc-catalyzed cyanation of aryl iodides with formamide as the cyanogen source. The transformation was promoted by the bisphosphine Nixantphos ligand. Under optimized conditions, a variety of electron-donating and electron-withdrawing aryl iodides were converted into nitrile products in good to excellent yields. This approach is an exceedingly simple and benign method for the synthesis of aryl nitriles and is likely to proceed via a dinuclear Zn-concerted catalysis.
A convenient reagent for the conversion of aldoximes into nitriles and isonitriles
Zhang, Wei,Lin, Jin-Hong,Zhang, Pengfei,Xiao, Ji-Chang
supporting information, p. 6221 - 6224 (2020/06/29)
For the dehydroxylation of aldoximes with 4-nitro-1-((trifluoromethyl)sulfonyl)-imidazole (NTSI), slight modifications of reaction conditions resulted in significantly different reaction paths to provide either nitriles or isonitriles. The challenging conversion of aldoximes into isonitriles was achieved under mild conditions.
HCl·DMPU-assisted one-pot and metal-free conversion of aldehydes to nitriles
Hammond, Gerald B.,Mudshinge, Sagar R.,Potnis, Chinmay S.,Xu, Bo
supporting information, p. 4161 - 4164 (2020/07/14)
We report an efficient HCl·DMPU assisted one-pot conversion of aldehydes into nitriles. The use of HCl·DMPU as both an acidic source as well as a non-nucleophilic base constitutes an environmentally mild alternative for the preparation of nitriles. Our protocol proceeds smoothly without the use of toxic reagents and metal catalysts. Diverse functionalized aromatic, aliphatic and allylic aldehydes incorporating various functional groups were successfully converted to nitriles in excellent to quantitative yields. This protocol is characterized by a broad substrate scope, mild reaction conditions, and high scalability. This journal is
Design, synthesis and evaluation of novel hybrids between 4-anilinoquinazolines and substituted triazoles as potent cytotoxic agents
Le-Nhat-Thuy, Giang,Dinh, Thuy Van,Pham-The, Hai,Nguyen Quang, Hung,Nguyen Thi, Nga,Dang Thi, Tuyet Anh,Hoang Thi, Phuong,Le Thi, Tu Anh,Nguyen, Ha Thanh,Nguyen Thanh, Phuong,Le Duc, Trung,Nguyen, Tuyen Van
supporting information, p. 3741 - 3747 (2018/10/20)
In this research several series of novel dioxygenated ring fused 4-anilinoquinazolines (10a-d) and 4-anilinoquinazoline-substituted triazole hybrid compounds (11–14) have been designed and synthesized. Their biological significance was highlighted by evaluating in vitro for anticancer activities, wherein several compounds displayed excellent activity specifically against three human cancer cell lines (KB, epidermoid carcinoma; HepG2, hepatoma carcinoma; SK-Lu-1, non-small lung cancer). Especially, compound 13a exhibited up to 100-fold higher cytotoxicity in comparison with erlotinib. Docking the most cytotoxic compounds (11d, 13a, 13b, and 14c) into the ATP binding site of different EGFR tyrosine kinase domains was perfomed to predict the analogous binding mode of these compounds to the EGFR targets.
o-Acylbenzonitriles: Synthesis and Heterocyclization under Acid Hydrolysis of the Cyano Group
Mochalov,Fedotov,Trofimova,Zefirov
, p. 403 - 413 (2018/06/12)
2-Cyanobenzophenones were synthesized by reaction of 2-bromobenzophenones with copper(I) cyanide in DMF, and their transformations involving acid hydrolysis of the cyano group were studied. Reactions of o-benzoylbenzonitriles with trifluoroacetic acid in
Catalytic Cyanation Using CO2 and NH3
Wang, Hua,Dong, Yanan,Zheng, Chaonan,Sandoval, Christian A.,Wang, Xue,Makha, Mohamed,Li, Yuehui
supporting information, p. 2883 - 2893 (2019/01/05)
Li and co-workers describe the catalytic cyanation of organic halides with CO2 and NH3. In the presence of Cu2O/DABCO as the catalyst, a variety of aromatic bromides and iodides were transformed to the desired nitrile products with broad functional-group tolerance. Both 13C- and/or 15N-labeled nitriles were obtained conveniently with appropriately isotope-labeled CO2 and NH3. Construction of functionalized chemical compounds from small molecules in a highly selective and efficient manner is crucial for sustainable development. The chemical-based manufacturing sector of the future should aim to produce chemicals from very simple and abundant resources, just as nature uses CO2 and N2 to generate sugars, amino acids, and so forth. In practice, however, the utilization of CO2 for the generation of industrial products, such as drugs and related intermediates, still remains a major challenge. Here, we describe the facile cyanide-free production of high-value nitriles with CO2 and NH3 as the sole sources of carbon and nitrogen, respectively. This practical and catalytic methodology provides a unique strategy for the utilization of small molecules for sustainable and cost-effective applications. Selective cyanation of aryl halides was achieved with CO2 and NH3 as the only sources of carbon and nitrogen, respectively. In the presence of Cu catalysts under low pressure (3 atm), a variety of aromatic iodides and bromides were transformed to the desired nitrile products without the use of toxic metal cyanides. Notably, olefins, esters, amides, alcohols, and amino groups were tolerated. Mechanistic studies suggest that Cu(III)-aryl insertion by isocyanate intermediates is involved. [13C,15N]-labeled nitriles were conveniently accessible from the respective isotope-labeled CO2 and NH3 via this methodology.
Cyaniding method for preparing nitrile compound
-
Paragraph 0107-0109, (2018/05/30)
The invention provides a cyaniding method for preparing a nitrile compound. Organic halide or pseudohalide, CO2 and NH3 which are low in price and are easily obtained and a reducing agent react, a selective cyaniding reaction is conducted in the presence of a transition metal catalyst, and the target product namely organic the nitrile compound is obtained. According to the cyaniding method for preparing the nitrile compound, a new reaction route is used, through a CO2 and NH3 reaction of metal catalysis, dehalogenation cyaniding or quasi halide cyaniding of halide or pseudohalide is directly achieved through a one-pot method, the problem is solved that a traditional cyanation reaction needs equivalent toxic cyanide, a new direct and convenient method for preparing isotope-labeled nitrile compounds is provided at the same time, and the method can be applied to medicine, tracing, biology and medicine research and development.
Stable and reusable nanoscale Fe2O3-catalyzed aerobic oxidation process for the selective synthesis of nitriles and primary amides
Murugesan, Kathiravan,Senthamarai, Thirusangumurugan,Sohail, Manzar,Sharif, Muhammad,Kalevaru, Narayana V.,Jagadeesh, Rajenahally V.
supporting information, p. 266 - 273 (2018/01/12)
The sustainable introduction of nitrogen moieties in the form of nitrile or amide groups in functionalized molecules is of fundamental interest because nitrogen-containing motifs are found in a large number of life science molecules, natural products and materials. Hence, the synthesis and functionalization of nitriles and amides from easily available starting materials using cost-effective catalysts and green reagents is highly desired. In this regard, herein we report the nanoscale iron oxide-catalyzed environmentally benign synthesis of nitriles and primary amides from aldehydes and aqueous ammonia in the presence of 1 bar O2 or air. Under mild reaction conditions, this iron-catalyzed aerobic oxidation process proceeds to synthesise functionalized and structurally diverse aromatic, aliphatic and heterocyclic nitriles. Additionally, applying this iron-based protocol, primary amides have also been prepared in a water medium.
