220006-53-1Relevant articles and documents
Schiff-base molecules and COFs as metal-free catalysts or silver supports for carboxylation of alkynes with CO2
Bu, Ran,Gao, En-Qing,Liu, Xiao-Yan,Mu, Peng-Fei,Zhang, Lin
, p. 7620 - 7629 (2021)
Carboxylation of terminal alkynes with CO2 to produce propiolic acids is an atom economical and high-value route for CO2 fixation and utilization, but the conversion under mild conditions needs transition metal catalysts. In this article, we demonstrated for the first time the transition-metal-free organocatalysts for the reaction. The efficient catalysts are Schiff bases derived from 1,3,5-triformylphloroglucinol (Tp), either homogeneous (discrete molecules) or heterogeneous (covalent organic frameworks, COFs). The key catalytic sites are phenoxo and imine groups, which activate CO2 through phenoxo-CO2 complexation and also activate the C(sp)-H bond through bifurcate C-H?Nimine and C-H?Ophenoxo hydrogen bonds. The 2,2′-bipyridyl sites in the COF also contribute to the catalytic performance. The COF catalyst is less active than the molecular one but has the advantages of heterogeneous catalysis. Higher performance was also demonstrated by combining silver nanoparticles (AgNPs) with the intrinsically catalytic COF. This work opens up the potential of developing transition-metal-free catalysts for the CO2 conversion reaction and demonstrates the new prospects of COFs as tailorable platforms for heterogeneous catalysis.
Carboxylation of terminal alkynes with CO2 catalyzed by bis(amidate) rare-earth metal amides
Cheng, Hao,Zhao, Bei,Yao, Yingming,Lu, Chengrong
, p. 1675 - 1682 (2015)
Three novel bis(amidate) rare-earth metal amides {LRE[N(SiMe3)2]·THF}2 (H2L = N,N′-(cyclohexane-1,2-diyl)bis(4-tert-butylbenzamide); RE = La(1), Nd(2), Y(3)), which were prepared by the treatment of the bridged amide proligand H2L with RE[N(SiMe3)2]3 in tetrahydrofuran, have been characterized by single-crystal X-ray diffraction, elemental analyses, and NMR for complexes 1 and 3. All the complexes were found, for the first time, to be efficient catalysts for the direct carboxylation of terminal alkynes with CO2 at ambient pressure. And the Nd-based catalyst 2 showed the highest reactivity. Various propiolic acids with a good functional group tolerance were successfully synthesized in high-to-excellent yields under mild conditions. This journal is
Copper(I)-modified covalent organic framework for CO2 insertion to terminal alkynes
Bu, Ran,Zhang, Lin,Gao, Lu-Lu,Sun, Weng-Jie,Yang, Shuai-Liang,Gao, En-Qing
, (2021)
The carboxylation of terminal alkynes with CO2 is an attractive route for CO2 fixation and conversion, and various homogeneous Cu(I) catalysts have been explored for the reaction. However, it is still a challenge to develop efficient heterogeneous catalysts for the conversion under mild conditions. Considering that covalent organic frameworks (COFs) are emerging as versatile platforms for the design of functional materials, we developed a TpBpy-supported Cu(I) catalyst, where TpBpy is a stable imine-type porous COF furnished with rich N,N- and N,O-chelating sites for Cu(I) immobilization. The hybrid material can efficiently catalyze the conversion of CO2 and terminal alkynes to propiolic acids under relatively mild conditions (1 atm CO2, 60 ℃). The catalytic activity arises from the synergy between the organic framework of TpBpy and the Cu(I) sites. Not merely serving as a porous support to afford isolated and accessible Cu(I) sites, the organic framework itself has its own catalytic activity through the polar and basic N and O functional sites, which could activate the C–H bond and facilitate CO2 absorption. In addition, the framework also serves as a giant ligand to shift the reversible Cu(I)-catalyzed process in favor of carboxylation. The catalyst shows somewhat reduced activity after reused for three cycles owing to the oxidation of Cu(I) to Cu(II), but it can be easily regenerated by treating with KI.
Organocatalytic Strategy for the Fixation of CO2via Carboxylation of Terminal Alkynes
Shi, Jun-Bin,Bu, Qingqing,Liu, Bin-Yuan,Dai, Bin,Liu, Ning
, p. 1850 - 1860 (2021/01/14)
An organocatalytic strategy for the direct carboxylation of terminal alkynes with CO2 has been developed. The combined use of a bifunctional organocatalyst and Cs2CO3 resulted in a robust catalytic system for the preparation of a range of propiolic acid derivatives in high yields with broad substrate scope using CO2 at atmospheric pressure under mild temperatures (60 °C). This work has demonstrated that this organocatalytic method offers a competitive alternative to metal catalysis for the carboxylation of terminal alkynes and CO2. In addition, this protocol was suitable for the three-component carboxylation of terminal alkynes, alkyl halides, and CO2.
Microwave-assisted fabrication of a mixed-ligand [Cu4(μ3-OH)2]-cluster-based metal–organic framework with coordinatively unsaturated metal sites for carboxylation of terminal alkynes with carbon dioxide
Wang, Wen-Jing,Sun, Zhong-Hua,Chen, Sheng-Chun,Qian, Jun-Feng,He, Ming-Yang,Chen, Qun
, (2021/05/24)
The development of efficient and stable metal–organic framework (MOF) catalysts with coordinatively unsaturated metal sites for modern organic synthesis is greatly important. Herein, a robust [Cu4(μ3-OH)2]-cluster-based MOF (Cu-MOF) with a mixed-ligand system was successfully fabricated by a microwave-assisted method under mild conditions. The as-prepared Cu-MOF catalyst possessing unsaturated Cu (II) sites exhibited excellent catalytic activity toward the direct carboxylation of 1-ethynylbenzene with CO2, and various propiolic acid derivatives were synthesized in moderate to good yields under optimized reaction conditions. Furthermore, the catalyst remained stable and could be easily recycled for five sequential runs without incredible decrease in catalytic efficiency.
Semireduction of alkynoic acids via a transition metal-free α borylation-protodeborylation sequence
Verma, Astha,Grams, R. Justin,Rastatter, Brett P.,Santos, Webster L.
, p. 2113 - 2117 (2019/02/25)
A method for the semi-reduction of alkynoic acids through an α-borylation and subsequent protodeborylation mechanism has been developed. The transition metal-free protocol is achieved through the activation of bis(pinacolato)diboron by an in situ generated carboxylate moiety yielding aryl acrylic acids. Our studies demonstrate an unprecedented dual role for the carboxylate anion that involves the activation of the diboron reagent and a directing effect in the α-borylation.
Fixation of CO2 as a carboxylic acid precursor by microcrystalline cellulose (MCC) supported Ag NPs: A more efficient, sustainable, biodegradable and eco-friendly catalyst
Shah, Dharmesh J.,Sharma, Anuj S.,Shah, Akshara P.,Sharma, Vinay S.,Athar, Mohd,Soni, Jigar Y.
supporting information, p. 8669 - 8676 (2019/06/14)
Silver nanoparticles supported on microcrystalline cellulose (Ag NPs@MCC), an active catalyst, has been discovered for the direct carbonylation of terminal alkynes with CO2 into carboxylic acid under mild and sustainable reaction conditions. The stabilized Ag NPs show higher distribution with a uniform particle size. The catalyst was characterized by PXRD, SEM, TEM, HR-TEM, EDS, EDX, ICP-AES and XPS analysis. The Ag NPs@MCC material was found to be more efficient, shows excellent dispersion in various solvents and is biodegradable. The solvent effects on carbonylation of terminal alkynes were well studied both experimentally and computationally. Furthermore, the present catalyst can be recycled in up to five catalytic cycles without significant loss of its activity and is also applicable for the gram scale carbonylation of terminal alkynes.
Carboxylation of terminal alkynes promoted by silver carbamate at ambient pressure
Bresciani, Giulio,Marchetti, Fabio,Pampaloni, Guido
, p. 10821 - 10825 (2019/07/15)
Transition metal carbamates constitute a class of compounds with unique properties, however their catalytic potential has been sparingly explored so far. The easily available silver N,N-dimethylcarbamate, Ag(O2CNMe2), worked as a catalyst in the carboxylation reaction of terminal alkynes with CO2 at atmospheric pressure. Different reaction parameters (solvent, base, temperature, time and the amount of catalyst) were investigated in order to establish the optimal conditions.
Silver-catalyzed Double Decarboxylative Radical Alkynylation/Annulation of Arylpropiolic Acids with α-keto Acids: Access to Ynones and Flavones under Mild Conditions
Meng, Mengting,Wang, Guofang,Yang, Liangfeng,Cheng, Kai,Qi, Chenze
, p. 1218 - 1231 (2018/02/16)
Ynones are privileged building blocks in various organic syntheses of heterocyclic derivatives due to their multifunctional nature, and flavones are an important class of natural products with a wide range of biological activities. We describe the catalytic double decarboxylative alkynylation of arylpropiolic acids with α-keto acids. With Ag(I)/persulfate as the catalysis system, the valuable ynones bearing various substituents could be easily obtained. The introduction of hydroxyl substituent on ortho-site of α-keto acids make this strategy further applicable to the construction of flavone derivatives via heteroannulation in moderate to good yields with a similar silver-catalyzed system. The reactions proceed under relatively mild reaction conditions and tolerate a wide variety of functional groups. Control experiments indicated that both the reactions undergo radical processes. (Figure presented.).
Carboxylation of Terminal Alkynes with Carbon Dioxide Catalyzed by an In Situ Ag2O/N-Heterocyclic Carbene Precursor System
Yuan, Ye,Chen, Cheng,Zeng, Cheng,Mousavi, Bibimaryam,Chaemchuen, Somboon,Verpoort, Francis
, p. 882 - 887 (2017/03/13)
A carboxylation of terminal alkynes with carbon dioxide (CO2) at ambient conditions was developed in situ using a series of N-heterocyclic carbene (NHC) precursors and Ag2O. The unique structure of NHCs largely increases the solubility of active Ag species and meanwhile activates CO2 by forming the NHC–CO2 adduct. This novel catalytic system demonstrated quite low Ag loading, very high activities, wide substrate generality and excellent tolerance for a variety of functionalities. In addition, avoiding cumbersome synthesis procedures, processing, and reserving of the photosensitive Ag complex, this system could be stored and operated as straightforward as the inorganic Ag salt catalysts.
