221908-50-5Relevant academic research and scientific papers
Graphene oxide as an acid catalyst for the room temperature ring opening of epoxides
Dhakshinamoorthy, Amarajothi,Alvaro, Mercedes,Concepcion, Patricia,Fornes, Vicente,Garcia, Hermenegildo
, p. 5443 - 5445 (2012)
The minute amount of hydrogen sulfate groups introduced into the graphene oxide (GO) obtained by Hummers oxidation of graphite renders this material as a highly efficient, recyclable acid catalyst for the ring opening of epoxides with methanol and other primary alcohols as nucleophile and solvent.
Enhancement of CO2 Adsorption and Catalytic Properties by Fe-Doping of [Ga2(OH)2(L)] (H4L = Biphenyl-3,3′,5,5′-tetracarboxylic Acid), MFM-300(Ga2)
Krap, Cristina P.,Newby, Ruth,Dhakshinamoorthy, Amarajothi,García, Hermenegildo,Cebula, Izabela,Easun, Timothy L.,Savage, Mathew,Eyley, Jennifer E.,Gao, Shan,Blake, Alexander J.,Lewis, William,Beton, Peter H.,Warren, Mark R.,Allan, David R.,Frogley, Mark D.,Tang, Chiu C.,Cinque, Gianfelice,Yang, Sihai,Schr?der, Martin
, p. 1076 - 1088 (2016)
Metal-organic frameworks (MOFs) are usually synthesized using a single type of metal ion, and MOFs containing mixtures of different metal ions are of great interest and represent a methodology to enhance and tune materials properties. We report the synthesis of [Ga2(OH)2(L)] (H4L = biphenyl-3,3′,5,5′-tetracarboxylic acid), designated as MFM-300(Ga2), (MFM = Manchester Framework Material replacing NOTT designation), by solvothermal reaction of Ga(NO3)3 and H4L in a mixture of DMF, THF, and water containing HCl for 3 days. MFM-300(Ga2) crystallizes in the tetragonal space group I4122, a = b = 15.0174(7) ? and c = 11.9111(11) ? and is isostructural with the Al(III) analogue MFM-300(Al2) with pores decorated with -OH groups bridging Ga(III) centers. The isostructural Fe-doped material [Ga1.87Fe0.13(OH)2(L)], MFM-300(Ga1.87Fe0.13), can be prepared under similar conditions to MFM-300(Ga2) via reaction of a homogeneous mixture of Fe(NO3)3 and Ga(NO3)3 with biphenyl-3,3′,5,5′-tetracarboxylic acid. An Fe(III)-based material [Fe3O1.5(OH)(HL)(L)0.5(H2O)3.5], MFM-310(Fe), was synthesized with Fe(NO3)3 and the same ligand via hydrothermal methods. [MFM-310(Fe)] crystallizes in the orthorhombic space group Pmn21 with a = 10.560(4) ?, b = 19.451(8) ?, and c = 11.773(5) ? and incorporates μ3-oxo-centered trinuclear iron cluster nodes connected by ligands to give a 3D nonporous framework that has a different structure to the MFM-300 series. Thus, Fe-doping can be used to monitor the effects of the heteroatom center within a parent Ga(III) framework without the requirement of synthesizing the isostructural Fe(III) analogue [Fe2(OH)2(L)], MFM-300(Fe2), which we have thus far been unable to prepare. Fe-doping of MFM-300(Ga2) affords positive effects on gas adsorption capacities, particularly for CO2 adsorption, whereby MFM-300(Ga1.87Fe0.13) shows a 49% enhancement of CO2 adsorption capacity in comparison to the homometallic parent material. We thus report herein the highest CO2 uptake (2.86 mmol g-1 at 273 K at 1 bar) for a Ga-based MOF. The single-crystal X-ray structures of MFM-300(Ga2)-solv, MFM-300(Ga2), MFM-300(Ga2)·2.35CO2, MFM-300(Ga1.87Fe0.13)-solv, MFM-300(Ga1.87Fe0.13), and MFM-300(Ga1.87Fe0.13)·2.0CO2 have been determined. Most notably, in situ single-crystal diffraction studies of gas-loaded materials have revealed that Fe-doping has a significant impact on the molecular details for CO2 binding in the pore, with the bridging M-OH hydroxyl groups being preferred binding sites for CO2 within these framework materials. In situ synchrotron IR spectroscopic measurements on CO2 binding with respect to the -OH groups in the pore are consistent with the above structural analyses. In addition, we found that, compared to MFM-300(Ga2), Fe-doped MFM-300(Ga1.87Fe0.13) shows improved catalytic properties for the ring-opening reaction of styrene oxide, but similar activity for the room-temperature acetylation of benzaldehyde by methanol. The role of Fe-doping in these systems is discussed as a mechanism for enhancing porosity and the structural integrity of the parent material.
Scandium trifluoromethanesulfonate-catalyzed mild, efficient, and selective cleavage of acetates bearing a coordinative group
Kajiro, Hiroshi,Mitamura, Shuichi,Mori, Atsunori,Hiyama, Tamejiro
, p. 1689 - 1692 (2007/10/03)
Scandium trifluoromethanesulfonate is a useful Lewis acid catalyst for cleavage of acetates containing coordinative groups adjacent to the acetyl carbonyl. The reaction proceeds under weak acidic conditions at room temperature. Racemizable α-keto acyloxy compounds are deacetylated without racemization. Selective mono-deacetylation at the 10-position of paclitaxel has been achieved.
Almond oxynitrilase-catalyzed transformation of aldehydes is strongly influenced by naphthyl and alkoxy substituents
Roda, Gabriella,Riva, Sergio,Danieli, Bruno
, p. 3939 - 3949 (2007/10/03)
Different α- and β-substituted aldehydes have been submitted to the catalytic action of almond oxynitrilase (PaHNL), in order to explore the influence of a stereocenter already present in the substrate on the selectivity of this enzyme. The results indicate that naphthyl and alkoxy substituents in the α- and also in the β-position to the aldehyde group significantly influence the stereochemical outcome of the PaHNL-catalyzed transformation.
