Welcome to LookChem.com Sign In|Join Free
  • or
Cyclohexyldithiocarbamic acid sodium salt, also known as sodium cyclohexyl dithiocarbamate, is a chemical compound with the formula C7H11NS2Na. It is a white crystalline solid that is soluble in water and is commonly used as a fungicide, particularly in the rubber industry to prevent the growth of microorganisms that can cause spoilage. The compound is also employed as a corrosion inhibitor and as a flotation agent in the mining industry. It is important to note that due to its potential health and environmental risks, handling and disposal of this chemical must be done with care, adhering to safety regulations.

2801-07-2

Post Buying Request

2801-07-2 Suppliers

Recommended suppliers

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

2801-07-2 Usage

Check Digit Verification of cas no

The CAS Registry Mumber 2801-07-2 includes 7 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 4 digits, 2,8,0 and 1 respectively; the second part has 2 digits, 0 and 7 respectively.
Calculate Digit Verification of CAS Registry Number 2801-07:
(6*2)+(5*8)+(4*0)+(3*1)+(2*0)+(1*7)=62
62 % 10 = 2
So 2801-07-2 is a valid CAS Registry Number.
InChI:InChI=1/C7H13NS2/c9-7(10)8-6-4-2-1-3-5-6/h6H,1-5H2,(H2,8,9,10)

2801-07-2SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 18, 2017

Revision Date: Aug 18, 2017

1.Identification

1.1 GHS Product identifier

Product name sodium,cyclohexylcarbamodithioic acid

1.2 Other means of identification

Product number -
Other names cyclohexyl-dithiocarbamic acid Na salt

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:2801-07-2 SDS

2801-07-2Relevant academic research and scientific papers

4-Aryl-2-Imino-1,3-Dithiolanes from the Room Temperature Coupling of Sodium Dithiocarbamates with Sulfonium Salts

Bresciani, Giulio,Marchetti, Fabio,Ciancaleoni, Gianluca,Pampaloni, Guido

, p. 1615 - 1622 (2021/03/03)

A series of 4-aryl-2-imino-1,3-dithiolanes was synthesized by means of a straightforward strategy starting from readily available precursors: reactions of dithiocarbamates and arylsulfonium salts, at room temperature in water/CH2Cl2 as biphasic medium, afforded the five-membered cyclic products in good yields. The reaction mechanism was investigated by DFT calculations.

Amine-carbon disulfide promoted synthesis of novel benzo[e][1,3]thiazepin-5(1H)-one derivatives

Asgari, Mohammad Sadegh,Bahadorikhalili, Saeed,Asadi, Mehdi,Rashidi Ranjbar, Parviz,Larijani, Bagher,Rahimi, Rahmatollah,Mahdavi, Mohammad

, p. 413 - 418 (2019/12/24)

In this paper, a simple method is introduced for the synthesis of novel 4-substituted-3-thioxo-3,4-dihydrobenzo[e][1,3]thiazepin-5(1H)-one derivatives. The synthesis is based on a two-step reaction of 2-methylbenzoic acid, an amine, and carbon disulfide. In the first step, 2-methylbenzoic acid reacts with sulfuric acid in ethanol, followed by the reaction with N-bromosuccinimide to produce ethyl 2-(bromomethyl)benzoate. Amine and carbon disulfide react in a separate flask in basic medium to give carbamodithioate salt. Carbamodithioate and ethyl 2-(bromomethyl)benzoate react together in dimethylformamide to produce the desired 4-substituted-3-thioxo-3,4-dihydrobenzo[e][1,3]thiazepin-5(1H)-one derivatives. The method is simple and fast and is applicable to a wide variety of substrates and gives the desired products in high isolated yields.

Design, Synthesis, Molecular Docking, and Cholinesterase Inhibitory Potential of Phthalimide-Dithiocarbamate Hybrids as New Agents for Treatment of Alzheimer's Disease

Asadi, Mehdi,Ebrahimi, Mostafa,Mohammadi-Khanaposhtani, Maryam,Azizian, Homa,Sepehri, Saghi,Nadri, Hamid,Biglar, Mahmood,Amanlou, Massoud,Larijani, Bagher,Mirzazadeh, Roghieh,Edraki, Najmeh,Mahdavi, Mohammad

, (2019/11/11)

A novel series of phthalimide-dithiocarbamate hybrids was synthesized and evaluated for in vitro inhibitory potentials against acetylcholinesterase (AChE) and butyrylcholinesterase (BuChE). The anti-cholinesterase results indicated that among the synthesized compounds, the compounds 7g and 7h showed the most potent anti-AChE and anti-BuChE activities, respectively. Molecular docking and dynamic studies of the compounds 7g and 7h, respectively, in the active site of AChE and BuChE revealed that these compounds as well interacted with studied cholinesterases. These compounds also possessed drug-like properties and were able to cross the BBB.

Syntheses and antimicrobial activities of 1-(3-benzyl-4-oxo-3,4-dihydroquinazolin-2-yl)-4-(substituted) thiosemicarbazide derivatives

Alagarsamy, Veerachamy,Solomon, Viswas Raja,Krishnamoorthy,Sulthana,Narendar

, p. 1471 - 1479 (2016/02/18)

A series of 1-(3-benzyl-4-oxo-3,4-dihydroquinazolin-2-yl)-4- (substituted) thiosemicarbazides (AS1-AS10) were obtained by the reaction of 3-benzyl-2-hydrazino-3H-quinazolin-4-one (6) with different dithiocarbamic acid methyl ester derivatives. The key intermediate, 3-benzyl-2-thioxo-2,3- dihydro-1H-quinazolin-4-one (4), was obtained by the reaction of benzyl amine (1) with carbon disulphide and sodium hydroxide in dimethyl sulphoxide to give sodium dithiocarbamate, which was methylated with dimethyl sulphate to yield the dithiocarbamic acid methyl ester 2 and condensation with methyl anthranilate (3) in ethanol yielded the desired compound (4) via the thiourea intermediate. The SH group of compound (4) was methylated in the favourable nucleophilic displacement reaction with hydrazine hydrate, which afforded 3-benzyl-2-hydrazino-3H-quinazolin-4-one (6). The IR, and 1H- and 13C-NMR spectra of these compounds showed the presence of peaks due to thiosemicarbazides, carbonyl (C=O), NH and aryl groups. The molecular ion peaks of the quinazolin-4-one moiety (m/z 144) were observed in all the mass spectra of the compounds AS1-AS10. Elemental (C, H, N) analysis satisfactorily confirmed purity and elemental composition of the synthesized compounds. All the synthesized compounds were screened for their antimicrobial activity against selective gram positive and gram negative bacteria by agar dilution method. In the present study, compounds AS8 and AS9 emerged as the most active compounds of the series.

Synthesis, characterization and biodistribution of a (99m)Tc nitrido complex as a potential brain perfusion imaging agent

Zhang, Junbo,Wang, Xuebin,Lu, Gongxu,Tang, Zhigang

, p. 693 - 700 (2007/10/03)

The bis(N-cyclohexyl-dithiocarbamato) nitrido technetium-99m complex [(99m)TcN(CHDTC)2] (CHDTC:N-cyclohexyl dithiocarbamato) has been synthesized through a ligand-exchange reaction. The two-step procedure involved the initial reaction of (99m)TcO4- with succinic dihydrazide (SDH) in the presence of stannous chloride as reducing agent and propylenediamine tetraacetic acid (PDTA) as complexant, followed by the addition of sodium N-cyclohexyl dithiocarbamate dihydrate. The radiochemical purity of the complex was over 90% by thin layer chromatography. It was stable over 6 h at room temperature. Its partition coefficient indicated that it was a good lipophilic complex. Biodistribution in mice demonstrated that the complex accumulated in brain with high uptake and good retention. The brain uptake (ID%/g) was 2.91, 5.88 and 5.91 at 5, 30 and 60 min post-injection respectively. The ratio of brain/blood in mice was high, 2.10 at 1 hr post-injection. The results for the complex suggested that it could be a potential brain perfusion imaging agent.

Process for production of isothiocyanates

-

, (2008/06/13)

Isothiocyanates are formed by oxidizing, with gaseous oxygen or air, in the presence of a metal oxidation catalyst a dithiocarbamate with appropriate control of the pH of the reaction medium to suppress the formation of by-products. Optionally a quaternary ammonium halide catalyst can be used to increase product yield.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1 Customer Service

What can I do for you?
Get Best Price

Get Best Price for 2801-07-2