31007-06-4Relevant academic research and scientific papers
Nickel/Cobalt-Catalyzed Reductive Hydrocyanation of Alkynes with Formamide as the Cyano Source, Dehydrant, Reductant, and Solvent
Zhang, Jin,Luo, Cui-Ping,Yang, Luo
supporting information, p. 283 - 288 (2020/12/01)
A Ni/Co co-catalyzed reductive hydrocyanation of various alkynes was developed for the production of saturated nitriles. Hydrocyanic acid is generated in situ from safe and readily available formamide. Formamide played multiple roles as a cyano source, dehydrant, and reductant for the NiII pre-catalyst and vinyl nitriles, along with acting as the co-solvent in this reaction. Detailed mechanistic investigation supported a pathway via hydrocyanation of C≡C bond and the subsequent reduction of C=C bond. Wide substrate scope, the employment of a cheap and stable nickel salt as pre-catalyst, a safe cyano source and convenient experimental operation render this hydrocyanation practical for the laboratory synthesis of saturated nitriles. (Figure presented.).
Assembly of α-(Hetero)aryl Nitriles via Copper-Catalyzed Coupling Reactions with (Hetero)aryl Chlorides and Bromides
Chen, Ying,Xu, Lanting,Jiang, Yongwen,Ma, Dawei
supporting information, p. 7082 - 7086 (2021/02/26)
α-(Hetero)aryl nitriles are important structural motifs for pharmaceutical design. The known methods for direct synthesis of these compounds via coupling with (hetero)aryl halides suffer from narrow reaction scope. Herein, we report that the combination of copper salts and oxalic diamides enables the coupling of a variety of (hetero)aryl halides (Cl, Br) and ethyl cyanoacetate under mild conditions, affording α-(hetero)arylacetonitriles via one-pot decarboxylation. Additionally, the CuBr/oxalic diamide catalyzed coupling of (hetero)aryl bromides with α-alkyl-substituted ethyl cyanoacetates proceeds smoothly at 60 °C, leading to the formation of α-alkyl (hetero)arylacetonitriles after decarboxylation. The method features a general substrate scope and is compatible with various functionalities and heteroaryls.
Rhenium(I)-Catalyzed C-Methylation of Ketones, Indoles, and Arylacetonitriles Using Methanol
Shee, Sujan,Kundu, Sabuj
, p. 6943 - 6951 (2021/05/29)
A ReCl(CO)5/MeC(CH2PPh2)3 (L2) system was developed for the C-methylation reactions utilizing methanol and base, following the borrowing hydrogen strategy. Diverse ketones, indoles, and arylacetonitriles underwent mono-and dimethylation selectively up to 99% yield. Remarkably, tandem multiple methylations were also achieved by employing this catalytic system.
Ni-Catalyzed hydrocyanation of alkenes with formamide as the cyano source
Shu, Xiao,Jiang, Yuan-Yuan,Kang, Lei,Yang, Luo
supporting information, p. 2734 - 2738 (2020/06/17)
CN generation from formamide dehydration! A novel Ni-catalyzed hydrocyanation of various alkenes to provide aliphatic nitriles is developed by generating hydrocyanic acid in situ from safe and readily available formamide. Excellent linear or branched regio-selectivity, wide substrate scope, cheap and stable nickel salt as a pre-catalyst, a safe cyano source, slow generation of CN to obviate catalyst deactivation and convenient experimental operation would render this hydrocyanation attactive for laboratory synthesis of aliphatic nitriles.
Nickel-Catalyzed Markovnikov Transfer Hydrocyanation in the Absence of Lewis Acid
Frye, Nils L.,Bhunia, Anup,Studer, Armido
supporting information, p. 4456 - 4460 (2020/06/03)
Hydrocyanation in the absence of toxic HCN gas is highly desirable. Addressing that challenge, transition-metal-catalyzed transfer hydrocyanation using safe HCN precursors has been developed, but these reagents generally require a Lewis acid for activation, and the control of regioselectivity often remains problematic. In this Letter, a Ni-catalyzed highly Markovnikov-selective transfer hydrocyanation that operates in the absence of any Lewis acid is reported. The readily prepared pro-aromatic 1-isopropylcyclohexa-2,5-diene-1-carbonitrile is used as the HCN source, and the reaction shows a broad substrate scope and high functional group tolerance. Terminal styrene derivatives, dienes, and internal alkynes are converted with good to excellent selectivities. Mechanistic studies provide insights into the origin of the regioselectivity.
Asymmetric Deoxygenative Cyanation of Benzyl Alcohols Enabled by Synergistic Photoredox and Copper Catalysis?
Chen, Hong-Wei,Lu, Fu-Dong,Cheng, Ying,Jia, Yue,Lu, Liang-Qiu,Xiao, Wen-Jing
supporting information, p. 1671 - 1675 (2020/11/03)
Summary of main observation and conclusion. An enantioselective deoxygenative cyanation of benzyl alcohols was accomplished for the first time through the synergistic photoredox and copper catalysis. This reaction features the use of organic photosensitizer and low-cost 3d metal catalyst, simple and safe operations, and extremely mild conditions. A variety of chiral benzyl nitriles were produced in generally good yields and high level of enantiocontrols from readily available feedstocks (22 examples, up to 93% yield and 92% ee).
Time Programmable Locking/Unlocking of the Calix[4]arene Scaffold by Means of Chemical Fuels
Del Giudice, Daniele,Spatola, Emanuele,Cacciapaglia, Roberta,Casnati, Alessandro,Baldini, Laura,Ercolani, Gianfranco,Di Stefano, Stefano
supporting information, p. 14954 - 14962 (2020/10/19)
In this work, we report that 2-cyano-2-phenylpropanoic acid and its p-Cl, p-CH3 and p-OCH3 derivatives can be used as chemical fuels to control the geometry of the calix[4]arene scaffold in its cone conformation. It is shown that, under the action of the fuel, the cone calix[4]arene platform assumes a “locked” shape with two opposite aromatic rings strongly convergent and the other two strongly divergent (“pinched cone” conformation). Only when the fuel is exhausted, the cone calix[4]arene scaffold returns to its resting, “unlocked” shape. Remarkably, the duration of the “locked” state can be controlled at will by varying the fuel structure or amount. A kinetic study of the process shows that the consume of the fuel is catalyzed by the “unlocked” calixarene that behaves as an autocatalyst for its own production. A mechanism is proposed for the reaction of fuel consumption.
Overcoming Selectivity Issues in Reversible Catalysis: A Transfer Hydrocyanation Exhibiting High Kinetic Control
Bhawal, Benjamin N.,Ehinger, Christian,Morandi, Bill,Reisenbauer, Julia C.
supporting information, p. 10914 - 10920 (2020/07/13)
Reversible catalytic reactions operate under thermodynamic control, and thus, establishing a selective catalytic system poses a considerable challenge. Herein, we report a reversible transfer hydrocyanation protocol that exhibits high selectivity for the thermodynamically less favorable branched isomer. Selectivity is achieved by exploiting the lower barrier for C-CN oxidative addition and reductive elimination at benzylic positions in the absence of a cocatalytic Lewis acid. Through the design of a novel type of HCN donor, a practical, branched-selective, HCN-free transfer hydrocyanation was realized. The synthetically useful resolution of a mixture of branched and linear nitrile isomers was also demonstrated to underline the value of reversible and selective transfer reactions. In a broader context, this work demonstrates that high kinetic selectivity can be achieved in reversible transfer reactions, thus opening new horizons for their synthetic applications.
α-Alkylation of Nitriles with Primary Alcohols by a Well-Defined Molecular Cobalt Catalyst
Paudel, Keshav,Xu, Shi,Ding, Keying
, p. 14980 - 14988 (2020/12/02)
The α-alkylation of nitriles with primary alcohols to selectively synthesize nitriles by a well-defined molecular homogeneous cobalt catalyst is presented. Thirty-two examples with up to 95% yield are reported. Remarkably, this transformation is environmentally friendly and atom economical with water as the only byproduct.
Preparation method of alkyl nitrile compound
-
Paragraph 0130-0132; 0144-0146, (2020/08/18)
The invention discloses a preparation method of an alkyl nitrile compound. Specifically, the preparation method comprises the following step: in an organic solvent, in the presence of a protective gasand under the action of a catalyst, carrying out a reduction reaction as shown in the specification on olefin as shown in a formula I, a cyanation reagent and water, wherein the alkyl nitrile compound 1 is a compound II and/or a compound III. The preparation method provided by the invention is mild in condition, can realize hydrocyanation of olefin more safely and efficiently, and has good substrate universality and functional group compatibility.
