3274-29-1Relevant academic research and scientific papers
Ruthenium-catalysed hydroxycarbonylation of olefins
Dühren, Ricarda,Kucmierczyk, Peter,Jackstell, Ralf,Franke, Robert,Beller, Matthias
, p. 2026 - 2030 (2021/04/09)
State-of-the-art catalyst systems for hydroxy- and alkoxycarbonylations of olefins make use of palladium complexes. In this work, we report a complementary ruthenium-catalysed hydroxycarbonylation of olefins applying an inexpensive Ru-precursor (Ru3(CO)12) and PCy3as a ligand. Crucial for the success of this transformation is the use of hexafluoroisopropanol (HFIP) as the solvent in the presence of an acid co-catalyst (PTSA). Overall, moderate to good yields are obtained using aliphatic olefins including the industrially relevant substrate di-isobutene. This atom-efficient catalytic transformation provides straightforward access to various carboxylic acids from unfunctionalized olefins.
An efficient and ultrastable single-Rh-site catalyst on a porous organic polymer for heterogeneous hydrocarboxylation of olefins
Yuan, Qiao,Song, Xiangen,Feng, Siquan,Jiang, Miao,Yan, Li,Li, Jingwei,Ding, Yunjie
supporting information, p. 472 - 475 (2021/01/25)
A heterogeneous hydrocarboxylation process of olefins to obtain carboxylic acids with one more carbon was first realized using a single-Rh-site catalyst formed on porous organic polymer (Rh1/POPs). The in situ formation of hydrophilic porous ionic polymer from hydrophobic POPs with the help of CH3I led to high activity and superb stability.
Carbonylative Transformation of Allylarenes with CO Surrogates: Tunable Synthesis of 4-Arylbutanoic Acids, 2-Arylbutanoic Acids, and 4-Arylbutanals
Wu, Fu-Peng,Li, Da,Peng, Jin-Bao,Wu, Xiao-Feng
supporting information, p. 5699 - 5703 (2019/08/01)
In this Communication, procedures for the selective synthesis of 4-arylbutanoic acids, 2-arylbutanoic acids, and 4-arylbutanals from the same allylbenzenes have been developed. With formic acid or TFBen as the CO surrogate, reactions proceed selectively and effectively under carbon monoxide gas-free conditions.
PROCESS FOR THE DIRECT CONVERSION OF ALKENES TO CARBOXYLIC ACIDS
-
Paragraph 0029-0032, (2019/07/10)
Process for the direct conversion of alkenes to carboxylic acids.
Mild C-H functionalization of alkanes catalyzed by bioinspired copper(ii) cores
Kirillova, Marina V.,Fernandes, Tiago A.,André, Vania,Kirillov, Alexander M.
supporting information, p. 7706 - 7714 (2019/08/30)
Three new copper(ii) coordination compounds formulated as [Cu(H1.5bdea)2](hba)·2H2O (1), [Cu2(μ-Hbdea)2(aca)2]·4H2O (2), and [Cu2(μ-Hbdea)2(μ-bdca)]n (3) were generated by aqueous medium self-assembly synthesis from Cu(NO3)2, N-butyldiethanolamine (H2bdea) as a main N,O-chelating building block and different carboxylic acids [4-hydroxybenzoic (Hhba), 9-anthracenecarboxylic (Haca), or 4,4′-biphenyldicarboxylic (H2bdca) acid] as supporting carboxylate ligands. The structures of products range from discrete mono- (1) or dicopper(ii) (2) cores to a 1D coordination polymer (3), and widen a family of copper(ii) coordination compounds derived from H2bdea. The obtained compounds were applied as bioinspired homogeneous catalysts for the mild C-H functionalization of saturated hydrocarbons (cyclic and linear C5-C8 alkanes). Two model catalytic reactions were explored, namely the oxidation of hydrocarbons with H2O2 to a mixture of alcohols and ketones, and the carboxylation of alkanes with CO/S2O82- to carboxylic acids. Both processes proceed under mild conditions with a high efficiency and the effects of different parameters (e.g., reaction time and presence of acid promoter, amount of catalyst and solvent composition, substrate scope and selectivity features) were studied and discussed in detail. In particular, an interesting promoting effect of water was unveiled in the oxidation of cyclohexane that is especially remarkable in the reaction catalyzed by 3, thus allowing a potential use of diluted, in situ generated solutions of hydrogen peroxide. Moreover, the obtained values of product yields (up to 41% based on alkane substrate) are very high when dealing with the C-H functionalization of saturated hydrocarbons and the mild conditions of these catalytic reactions (50-60 °C, H2O/CH3CN medium). This study thus contributes to an important field of alkane functionalization and provides a notable example of new Cu-based catalytic systems that can be easily generated by self-assembly from simple and low-cost chemicals.
Regioselectivity inversion tuned by iron(iii) salts in palladium-catalyzed carbonylations
Huang, Zijun,Cheng, Yazhe,Chen, Xipeng,Wang, Hui-Fang,Du, Chen-Xia,Li, Yuehui
supporting information, p. 3967 - 3970 (2018/04/23)
Impactful regioselectivity control is crucial for cost-effective chemical synthesis. By using cheap and abundant iron(iii) salts, the hydroxycarbonylations of both aromatic and aliphatic alkenes were significantly enhanced in both reactivity and selectivity (iso/n or n/iso up to >99:1). Moreover, Pd-catalyzed carbonylation selectivity can be switched from branched to linear by using different Fe(iii) salts. In addition, similar results were obtained for the carbonylation of secondary alcohols.
Three-component 1D and 2D metal phosphonates: structural variability, topological analysis and catalytic hydrocarboxylation of alkanes
Demadis, Konstantinos D.,Anagnostou, Zafeiria,Panera, Aggeliki,Mezei, Gellert,Kirillova, Marina V.,Kirillov, Alexander M.
, p. 17788 - 17799 (2017/03/30)
Herein, we report the use of diphosphonate building blocks and chelating auxiliary N,N-ligands to generate novel polymeric architectures. Specifically, we report new 1D and 2D coordination polymers incorporating three components: transition metal ions (Co2+, Cu2+, Mn2+ or Zn2+), diphosphonate ligands (methane-diphosphonate, MDPA, or 1,2-ethanediphosphonate, EDPA) and N,N-heterocyclic chelators (1,10-phenanthroline, phen, or 2,2′-bipyridine, bpy). Six compounds were isolated under mild synthesis (ambient temperature) conditions: [Cu2(phen)2(EDPA)2(H2O)4]∞ (1), [Co(phen)(EDPA)(H2O)2]∞ (1a), {[Cu(phen)(MDPA)]·H2O]}∞ (2), [Mn(bpy)(EDPA)(H2O)2]∞ (3), [Zn(bpy)(EDPA)]∞ (4), and, lastly, a discrete Ni2+ molecular derivative [Ni(phen)(H2O)4](EDPA) (5). Synthetic details, crystal structures, and intermolecular interactions (π-π stacking and hydrogen bonding) in 1-5 are discussed. Topological analyses and classification of the underlying metal-organic networks in 1-4 were performed, revealing the uninodal 1D chains with the 2C1 topology in 1-3 and the binodal 2D layers with the 3,4L13 topology in 4. In 1-3 and 5, multiple hydrogen bonds lead to the extension of the structures to give 3D H-bonded nets with the seh-4,6-C2/c topology in 1 and 3, 2D H-bonded layers with the 3,5L52 topology in 2, and a 3D H-bonded net with the 6,6T1 topology in 5. The catalytic activity of compounds 1 and 1a was evaluated in a single-step hydrocarboxylation of cyclic and linear C5-C8 alkanes to furnish the carboxylic acids with one more carbon atom. These reactions proceed in the presence of CO, K2S2O8, and H2O at 60 °C in MeCN/H2O medium. Compound 1 showed higher activity than 1a and was studied in detail. Substrate scope was investigated, revealing that cyclohexane and n-pentane are the most reactive among the cyclic and linear C5-C8 alkanes, and resulting in the total yields of carboxylic acids (based on substrate) of up to 43 and 36%, respectively. In the case of cycloalkane substrates, only one cycloalkanecarboxylic acid is produced, whereas a series of isomeric monocarboxylic acids is generated when using linear alkanes; an increased regioselectivity at the C(2) position of the hydrocarbon chain was also observed.
Method for Producing Isononanoic Acid Esters, Starting from 2-Ethyl Hexanol
-
Paragraph 0081-0087, (2015/06/17)
A Process for preparing carboxylic esters of a mixture of structurally branched C9 monocarboxylic acids proceeding from 2-ethylhexanol is characterized in that (a) 2-ethylhexanol is dehydrated to an octene mixture in the presence of a catalyst; (b) the octene mixture obtained in step a) is reacted in the presence of a transition metal compound of group VIII of the periodic table of the elements with carbon monoxide and hydrogen to give a mixture of isomeric isononanals; (c) the mixture of isomeric isononanals obtained in step b) is oxidized to a mixture of structurally branched C9 monocarboxylic acids; and (d) the mixture of structurally branched C9 monocarboxylic acids obtained in step c) is reacted with alcohols to give carboxylic esters.
Method for Producing Isononanoic Acids from 2-Ethyl Hexanol
-
Paragraph 0062-0071, (2015/07/15)
Process for preparing isononanoic acid proceeding from 2-ethylhexanol, characterized in that (a) 2-ethylhexanol is dehydrated to octene in the presence of a catalyst; (b) the octene obtained in step a) is reacted in the presence of a transition metal compound of group VIII of the periodic table of the elements with carbon monoxide and hydrogen to give isononanal; and (c) the isononanal obtained in step b) is oxidized to isononanoic acid.
PROCESS FOR PRODUCING 2-ETHYLHEPTANOIC ACID
-
Page/Page column 0052, (2014/07/22)
Process for producing 2-ethylheptanoic acid.
