330442-12-1

Upstream product

• 1942-31-0 4-(phenylethinyl)acetophenone 
• 20488-43-1 4-acetyl-trans-stilbene 
• 100-42-5 styrene 
• 99-90-1 para-bromoacetophenone 
• 29778-20-9 1-ethyl-4-(phenylethynyl)benzene 
• 42472-69-5 4-ethynylacetophenone 
• 827319-25-5 3-[4-(1-oxoethyl)phenyl]-1-phenyl-2-propynone 
• 140-29-4 phenylacetonitrile 
• 149104-90-5 4-acetylphenylboronic acid 
• 6420-94-6 1-(4-acetylphenyl)-2-phenylethanone 
• 3112-03-6 4-acetylstilbene 
• 536-74-3 phenylacetylene 

Relevant academic research and scientific papers

ICl/AgNO3 Co-catalyzed radical oxidation of diaryl- A nd alkylarylalkynes into 1,2-diketones

A novel ICl/AgNO3 co-catalyzed radical oxidation of diaryl- A nd alkylarylalkynes into 1,2-diketones is reported. The reaction proceeded smoothly under mild conditions and generated 1,2-diketones in moderate to good yields with a good tolerance of functional groups. Furthermore, the obtained C4-(1,2-diketoaryl)isoxazoles could react smoothly with 1,2-diaminobenzene to form C4-(3-arylquinoxalin-2-yl)isoxazoles. At last, a new one-pot strategy for the synthesis of quinoxalines from 1,2-diphenylethynes and 1,2-diaminobenzene is also reported.

Visible light-induced aerobic oxidation of diarylalkynes to α-diketones catalyzed by copper-superoxo at room temperature

We have developed the visible light induced simple copper(ii) chloride catalyzed oxidation of diarylacetylenes to α-diketones by molecular oxygen at room temperature. The in situ generated copper(ii)-superoxo complex is a light-absorbing species that oxidizes inert diarylacetylenes to α-diketones. In contrast to reported photochemical processes, the current oxidation protocol does not require any exogenous photocatalyst or radical initiator. The green chemistry metrics evaluation signifies that the E-factor for the current oxidation process is ～2.3 times better than that of reported photochemical processes. The current reaction scores 63 on the EcoScale of 0-100, indicating an adequate synthesis process. Thus, the overall oxidation process is simple, environmentally benign, and economically feasible. This journal is

Palladium-Catalyzed Oxidative C≡C Triple Bond Cleavage of 2-Alkynyl Carbonyl Compounds Toward 1,2-Dicarbonyl Compounds?

A new, general palladium-catalyzed oxidative strategy for the cleavage of the C≡C triple bond is presented. By employing PdCl2, CuBr2, TEMPO and air as the catalytic system and H2O as the carbonyl oxygen atom source, a wide range of 2-alkynyl carbonyl compounds, including 1,3-disubstituted prop-2-yn-1-ones, propiolamides and propiolates, lost an alkynyl carbon to access various 1,2-dicarbonyl compounds, e.g., 1,2-diones, 2-keto amides and 2-keto esters, through Wacker oxidation, intramolecular cyclization and C—C bond cleavage cascades.

Nature of the Nucleophilic Oxygenation Reagent Is Key to Acid-Free Gold-Catalyzed Conversion of Terminal and Internal Alkynes to 1,2-Dicarbonyls

2,3-Dichloropyridine N-oxide, a novel oxygen transfer reagent, allows the conductance of the gold(I)-catalyzed oxidation of alkynes to 1,2-dicarbonyls in the absence of any acid additives and under mild conditions to furnish the target species, including those derivatized by highly acid-sensitive groups. The developed strategy is effective for a wide range of alkyne substrates such as terminal- and internal alkynes, ynamides, alkynyl ethers/thioethers, and even unsubstituted acetylene (40 examples; yields up to 99%). The oxidation was successfully integrated into the trapping of reactive dicarbonyls by one-pot heterocyclization and into the synthesis of six-membered azaheterocycles. This synthetic acid-free route was also successfully applied for the total synthesis of a natural 1,2-diketone.

Gold-Catalyzed Oxidation of Internal Alkynes into Benzils and its Application for One-Pot Synthesis of Five-, Six-, and Seven-Membered Azaheterocycles

Internal alkynes have been shown to undergo oxidation to substituted benzils (1,2-diarylethane-1,2-diones) by α-picoline N-oxide in the presence of Ph3PAuNТf2 (5 mol-%). In addition to the unsubstituted benzil, the method allows preparing, under markedly mild conditions (50 °C in chlorobenzene), various non-symmetrical products, including heteroaromatic versions thereof which are much more difficult to obtain otherwise. This gold(I)-catalyzed transformation was integrated into one-pot reaction sequence delivering a range of 5- to 7-membered ring systems (imidazoles, quinoxalines, 1,2,4-triazines, pyrazines, and 1,4-diazepines), thus linking these important heterocyclic motifs to the internal alkyne reagent space.

Electrochemical synthesis of 1,2-diketones from alkynes under transition-metal-catalyst-free conditions

We report an electrochemical protocol for the direct oxidation of internal alkynes in air to provide 1,2-diketones. A variety of functional groups and heterocycle-containing substrates can be tolerated well under mild conditions.

Two-Step One-Pot Synthesis of Unsymmetrical (Hetero)Aryl 1,2-Diketones by Addition-Oxygenation of Potassium Aryltrifluoroborates to (Hetero)Arylacetonitriles

An efficient one-pot two-step procedure for the synthesis of unsymmetrical (hetero)aryl 1,2-diketones has been developed. The reaction proceeds through a palladium-catalyzed nucleophilic addition of potassium aryltrifluoroborates to aliphatic nitriles followed by a copper-catalyzed aerobic benzylic C–H oxygenation using molecular oxygen as a green oxidant. This represents the first example of the direct synthesis of unsymmetrical diaryl 1,2-diketones from arylacetonitriles. This method utilizes inexpensive, stable, nontoxic, and readily available starting materials, is highly effective in the presence of both electron-rich and electron-poor nitriles and aryltrifluoroborates, and tolerates a wide variety of functional groups. The synthetic utility of this transformation was shown by increasing the scale of the reaction and by carrying out the one-pot protocol for the preparation of quinoxaline and benzimidazole derivatives. A plausible reaction mechanism has also been proposed.

Design and synthesis of functionalized coordination polymers as recyclable heterogeneous photocatalysts

The functionalized ligand 9,10-anthraquinone-1,4-dicarboxylate acid (H2AQDC) was designed and synthesized in order to develop metal-organic coordination polymers as heterogeneous catalysts with a photosensitizing feature. Two major considerations of the ligand design are anthraquinone moieties for photosensitizing to harvest light and carboxylate groups for polymeric coordination toward less solubility. A series of transition metal complexes based on this ligand were synthesized subsequently, namely {Co(AQDC)(H2O)3·2H2O}n (Co-AQDC), {Ni(AQDC)(H2O)3·2H2O}n (Ni-AQDC), {[Cu(AQDC)(H2O)3][Cu(AQDC)(H2O)2(DMF)]·(H2O)4}n (Cu-AQDC), {Zn1.5(AQDC)(OH)(H2O)2·H2O}n (Zn-AQDC), {Ag2(AQDC)(CH3OH)}n (Ag-AQDC). Both the ligand and its transition metal complexes are able to catalyze the visible-light driven oxidation reactions of alkynes into 1,2-diketones in air under mild conditions, in which compound Ni-AQDC demonstrates the best activity. This catalyst can be easily isolated from the reaction mixture by filtration with a trace amount of loss in solution and is ready for recycled use after simple washing and drying without any need for regeneration. Remarkably, the catalyst shows no loss of activity after five catalytic cycles and X-ray powder diffraction proves no change in the structure after five runs. This designed metal-organic coordination polymer represents an environmentally friendly, economical and recyclable photocatalyst, constituting a good candidate for photocatalytic organic syntheses in terms of green chemistry.

Preparing method of photocatalytic alpha-diketone compound

The invention belongs to the technical field of medical and chemical intermediates and related chemicals, and provides a preparing method of photocatalytic alpha-diketone compound. Phenylacetylene and the derivative thereof are used as raw materials, and under the lighting condition, under the combined action of a semiconductor photocatalyst and an additive, alpha-diketone compound is generated through air oxygen in organic solvent. The preparing method has the advantages of being easy to operate, mild in condition and environmentally friendly, has probability of industrialization and obtains the alpha-diketone compound at the high yield, and the catalyst is recyclable. The alpha-diketone compound synthesized through the method can be further functionalized to obtain various compounds applied to development and research of natural products, function materials and fine chemicals.

Synthesis of 1,2-Diketones via a Metal-Free, Visible-Light-Induced Aerobic Photooxidation of Alkynes

1,2-Diketones were synthesized by the oxidation of corresponding alkynes using air as the oxidant under metal-free conditions upon irradiation of blue light. A cheap and readily available organic dye, eosin Y, was used as the photocatalyst. For various substituents on the aryl ring, the reaction proceeded smoothly to give the dicarbonylation products in moderate to good yields. Some oxidation-sensitive groups, such as formyl and the carbon-carbon double bond, were tolerated under the developed reaction conditions.