33652-83-4

Upstream product

• 109-72-8 n-butyllithium 
• 100-52-7 benzaldehyde 
• 1009-14-9 phenyl butyl ketone 
• 583-03-9 1-Phenyl-1-pentanol 
• 17279-31-1 (-)-(S)-N,N-dimethyl-1-phenylethylamine 
• 108-24-7 acetic anhydride 
• 1191-47-5 dibutylmagnesium 
• 1119-90-0 di-n-butylzinc 
• 557-20-0 diethylzinc 
• 110-62-3 pentanal 
• 591-51-5 phenyllithium 
• 1889-20-9 n-butylmagnesium iodide 
• 100-44-7 benzyl chloride 
• 85167-10-8 (s)-pinanediol butylboronate 

Downstream Products

• 87190-42-9 (S)-1-phenylpentyl acetate 
• 137943-91-0 (R,R)-1,3-dimethyl-2-[(1S)-phenyl-pentyloxy]-octahydro-benzo[1,3,2]diazaphosphole 
• 137943-93-2 (R,R)-1,3-dimethyl-2-[(1S)-phenyl-pentyloxy]-octahydro-benzo[1,3,2]diazaphosphole-2-sulfide 

Relevant academic research and scientific papers

Bio-inspired asymmetric aldehyde arylations catalyzed by rhodium-cyclodextrin self-inclusion complexes

Transition-metal catalysts are powerful tools for carbon-carbon bond-forming reactions that are difficult to achieve using native enzymes. Enzymes that exhibit inherent selectivities and reactivities through host-guest interactions have inspired widesprea

Manganese catalyzed asymmetric transfer hydrogenation of ketones

The asymmetric transfer hydrogenation (ATH) of a wide range of ketones catalyzed by manganese complex as well as chiral PxNy-type ligand under mild conditions was investigated. Using 2-propanol as hydrogen source, various ketones could be enantioselectively hydrogenated by combining cheap, readily available [MnBr(CO)5] with chiral, 22-membered macrocyclic ligand (R,R,R',R')-CyP2N4 (L5) with 2 mol% of catalyst loading, affording highly valuable chiral alcohols with up to 95% ee.

Highly Active Cooperative Lewis Acid—Ammonium Salt Catalyst for the Enantioselective Hydroboration of Ketones

Enantiopure secondary alcohols are fundamental high-value synthetic building blocks. One of the most attractive ways to get access to this compound class is the catalytic hydroboration. We describe a new concept for this reaction type that allowed for exceptional catalytic turnover numbers (up to 15 400), which were increased by around 1.5–3 orders of magnitude compared to the most active catalysts previously reported. In our concept an aprotic ammonium halide moiety cooperates with an oxophilic Lewis acid within the same catalyst molecule. Control experiments reveal that both catalytic centers are essential for the observed activity. Kinetic, spectroscopic and computational studies show that the hydride transfer is rate limiting and proceeds via a concerted mechanism, in which hydride at Boron is continuously displaced by iodide, reminiscent to an SN2 reaction. The catalyst, which is accessible in high yields in few steps, was found to be stable during catalysis, readily recyclable and could be reused 10 times still efficiently working.

Iridium-Catalyzed Enantioselective Transfer Hydrogenation of Ketones Controlled by Alcohol Hydrogen-Bonding and sp3-C?H Noncovalent Interactions

Iridium-catalyzed enantioselective transfer hydrogenation of ketones with formic acid was developed using a prolinol-phosphine chiral ligand. Cooperative action of the iridium atom and the ligand through alcohol-alkoxide interconversion is crucial to facilitate the transfer hydrogenation. Various ketones including alkyl aryl ketones, ketoesters, and an aryl heteroaryl ketone were competent substrates. An attractive feature of this catalysis is efficient discrimination between the alkyl and aryl substituents of the ketones, promoting hydrogenation with the identical sense of enantioselection regardless of steric demand of the alkyl substituent and thus resulting in a rare case of highly enantioselective transfer hydrogenation of tert-alkyl aryl ketones. Quantum chemical calculations revealed that the sp3-C?H/π interaction between an sp3-C?H bond of the prolinol-phosphine ligand and the aryl substituent of the ketone is crucial for the enantioselection in combination with O?H???O/sp3-C?H???O two-point hydrogen-bonding between the chiral ligand and carbonyl group. (Figure presented.).

Chiral zinc amidate catalyzed additions of diethylzinc to aldehydes

A series of bifunctional spiro ligands bearing “carboxamide–phosphine oxide” groups and ethylzinc carboxamidates from these ligands as catalysts for Et2Zn additions to aldehydes were reported. Excellent yields were obtained with moderate ee′s in Et2Zn additions to benzaldehyde derivatives, implying effectiveness of our newly designed catalytic structures as well as mediocre stereocontrol by these chiral ligands. Possible transition states were suggested based on the crystal structures of two ligands.

Highly Focused Library-Based Engineering of Candida antarctica Lipase B with (S)-Selectivity Towards sec-Alcohols

Candida antarctica lipase B (CALB) is one of the most extensively used biocatalysts in both academia and industry and exhibits remarkable (R)-enantioselectivity for various chiral sec-alcohols. Considering the significance of tailor-made stereoselectivity in organic synthesis, a discovery of enantiocomplementary lipase mutants with high (R)- and (S)-selectivity is valuable and highly desired. Herein, we report a highly efficient directed evolution strategy, using only 4 representative amino acids, namely, alanine (A), leucine (L), lysine (K), tryptophan (W) at each mutated site to create an extremely small library of CALB variants requiring notably less screening. The obtained best mutant with three mutations W104V/A281L/A282K displayed highly reversed (S)-selectivity towards a series of sec-alcohol with E values up to 115 (conv. 50%, ee 94%). Compared with the previously reported (S)-selective CALB variant, W104A, a single mutation provided less selectivity, while the synergistic effects of three mutations in the best variant endow better (S)-selectivity and a broader substrate scope than the W104A variant. Structural analysis and molecular dynamics simulation unveiled the source of reversed enantioselectivity. (Figure presented.).

LipG9-mediated enzymatic kinetic resolution of racemates: Expanding the substrate-scope for a metagenomic lipase

Enzymes are the main biocatalysts of biological systems and nowadays they play an important role in asymmetric organic synthesis. Microorganisms are the main source for enzymes, however, just a very small portion of them are culturable at lab conditions and, as an alternative, metagenomics approaches allow new enzymes to be accessed from so-called “non-culturable” microorganisms. Several classes of metagenomic enzymes have been described in literature. Nevertheless, studies about their potential for asymmetric biotransformation are underexploited. Therefore, we present our recent efforts to establish the substrate-scope of LipG9, a metagenomic lipase, in enzymatic kinetic resolution (EKR) of chiral substances. LipG9 was previously isolated, immobilized and successfully applied in EKR of aliphatic alcohols. In this study, a series of resolvable chiral substances were assayed with LipG9, and secondary benzyl alcohols/esters were preferentially resolved in a much superior enantioselectivity (E > 200) than those described for aliphatic alcohols (E from 4 to 63). In an opposite way, Im-LipG9 did not present activity for tertiary alcohols, amines and lactones. When compared to commercial lipases, Im-LipG9 enantioselectivity was superior to Candida rugosa lipase and equivalent to Candida antarctica lipase B. Thus, the chemo and enantioselectivity of LipG9 in EKR reactions were identified and its potential for asymmetric synthetic approaches was demonstrated.

Nickel-Catalyzed Enantioconvergent Borylation of Racemic Secondary Benzylic Electrophiles

Nickel-catalyzed cross-coupling has emerged as the most versatile approach to date for achieving enantioconvergent carbon–carbon bond formation using racemic alkyl halides as electrophiles. In contrast, there have not yet been reports of the application of chiral nickel catalysts to the corresponding reactions with heteroatom nucleophiles to produce carbon–heteroatom bonds with good enantioselectivity. Herein, we establish that a chiral nickel/pybox catalyst can borylate racemic secondary benzylic chlorides to provide enantioenriched benzylic boronic esters, a highly useful family of compounds in organic synthesis. The method displays good functional group compatibility (e.g., being unimpeded by the presence of an indole, a ketone, a tertiary amine, or an unactivated alkyl bromide), and both of the catalyst components (NiCl2?glyme and the pybox ligand) are commercially available.

Enantioselective 1,2-Anionotropic Rearrangement of Acylsilane through a Bisguanidinium Silicate Ion Pair

Highly enantioselective bisguanidinium-catalyzed tandem rearrangements of acylsilanes are reported. The acylsilanes were activated via an addition of fluoride on the silicon to form a penta-coordinate anionic silicate intermediate. The silicate then underwent alkyl or aryl group migration from the silicon atom to the neighboring carbonyl carbon atom (1,2-anionotropic rearrangement), followed by [1,2]-Brook rearrangement to provide the secondary alcohols in high yields with excellent enantioselectivities (up to 95% ee). The isolation of an α-silylcarbinol intermediate as well as DFT calculations revealed that the 1,2-anionotropic rearrangement occurred via a bisguanidinium silicate ion pair, which is the stereodetermining step. The chiral center formed is then retained without inversion through the subsequent [1,2]-Brook rearrangement. Crotyl acylsilanes were smoothly transformed into homoallylic linear crotyl alcohols with retention of E/Z geometry, and no branched alcohols were detected. This clearly suggested that the 1,2-anionotropic rearrangement occurred through a three-membered instead of a five-membered transition state.

A Chiral Metal-Organic Material that Enables Enantiomeric Identification and Purification

We show that CMOM-3S, a previously unreported porous crystalline metal-organic material that exhibits intrinsic homochirality, serves as a general-purpose chiral crystalline sponge (CCS) and a chiral stationary phase (CSP) for gas chromatography (GC). The properties of CMOM-3S are enabled by nano-sized channels connected to adaptable molecular recognition sites that mimic enzyme-binding sites. Further, CMOM-3S is composed of inexpensive components, facile to prepare, and requires only trace amounts of analyte. When coupled with the thermal and hydrolytic stability of CMOM-3S, these features mean that a coated fused silica capillary column in which CMOM-3S serves as a CSP is both more versatile and more robust than three benchmark commercial columns. That the enantiomer with the longer GC retention time is consistently captured in CCS experiments enables CMOM-3S to serve as a powerful tool to enable both chiral purification and enantiomer identification.