37596-36-4Relevant articles and documents
Methyl-modified cage-type phosphorus ligand and preparation method thereof Preparation method and application thereof
-
Paragraph 0075-0084; 0087-0088, (2021/09/15)
The invention discloses a methyl-modified cage-type phosphorus ligand, a preparation method and application thereof, in particular to a synthesis design, wherein methyl is further introduced on a phenyl ring of triphenylphosphine, and a methyl-modified cage-type phosphorus ligand is synthesized, and when a methyl meta-substituted cage-type phosphorus ligand is used as a hydroformylation reaction catalyst the proportion of n-structural aldehyde and isomeric aldehyde is 2.6. TOF-1 The methyl-substituted cage-type phosphorus ligand is excellent in performance, stable in property and recyclable, has excellent substrate applicability in the hydroformylation catalytic reaction, has a good industrial application prospect, and has very important significance in metal organic catalysis.
Homogeneous hydroformylation of long chain alkenes catalyzed by water soluble phosphine rhodium complex in CH3OH and efficient catalyst cycling
Liu, Yan-li,Zhao, Jian-gui,Zhao, Yuan-jiang,Liu, Hui-Min,Fu, Hai-yan,Zheng, Xue-li,Yuan, Mao-lin,Li, Rui-xiang,Chen, Hua
, p. 7382 - 7387 (2019/03/19)
The hydroformylation of long chain alkenes catalyzed by a water soluble Rh/TPPTS complex (TPPTS: sodium salt of sulfonated triphenylphosphine) in methanol was investigated. The mixture of rhodium precursor HRh(CO)(TPPTS)3, ligand TPPTS, methanol and a long chain alkene becomes a single phase under reaction conditions, which make the hydroformylation reaction proceed homogeneously. Both the conversion of long chain alkene and the selectivity to aldehydes (including the aldehydes forming methylacetals) could reach up to 97.8% and 97.6%, respectively, with 3323 h?1 of TOF (TOF: turnover frequency is defined as the moles of converted alkene per mole of Rh per hour). After the solvent methanol was removed under the reaction temperature, two phases were formed automatically. The colourless product phase could be efficiently separated from the precipitate rhodium catalyst phase by centrifuge. The catalyst was reused for five times without obvious loss of rhodium and the catalytic activity. The rhodium leaching in product mixture was less than 0.03% of the total rhodium.
Integration of phosphine ligands and ionic liquids both in structure and properties-a new strategy for separation, recovery, and recycling of homogeneous catalyst
Jin, Xin,Feng, Jianying,Song, Hongbing,Yao, Jiajun,Ma, Qingqing,Zhang, Mei,Yu, Cong,Li, Shumei,Yu, Shitao
, p. 3583 - 3596 (2019/07/10)
The major limitation of classic biphasic ionic liquid (IL) catalysis is the heavy use of solvent ILs, which not only violates green chemistry principles but also even worsens catalytic efficiency. So it has always been a challenge finding ways to use ILs more efficiently, economically, and greenly to construct highly effective and long term stable IL catalytic systems. In this work, we synthesized a class of room temperature phosphine-functionalized polyether guanidinium ionic liquids (RTP-PolyGILs) by a convenient ion exchange reaction of polyether guanidinium ionic liquids (PolyGILs) with phosphine-sulfonate ligands based on the concept of the integration of both the phosphine ligand and IL. The resulting RTP-PolyGILs existed as liquids at room temperature and possessed dual functions of both the phosphine ligand and solvent IL; therefore they could both form catalysts by complexing with transition metals and act as catalyst carriers, thus achieving the integration of phosphine ligands with ILs both in structure and properties. Based on the unique properties of these multi-functional integrated RTP-PolyGILs, we constructed a highly effective homogeneous catalysis-biphasic separation (HCBS) system for Rh-catalyzed hydroformylation of higher olefins using only a catalytic amount of RTP-PolyGILs (equivalent to 0.025-0.4 mol% of 1-alkenes). Our HCBS system could be flexibly regulated with regard to catalytic performance (activity and linear selectivity) by changing the structure or type of the sulfonated ligand anion on RTP-PolyGILs. Specifically, it presented a TOF value of 3000-26000 h-1 and a linear selectivity of 68%-98% (corresponding to the l/b ratio of 2.2-37.5) with a total turnover number (TTON) of 11000-45000 and an extremely low Rh leaching of only 0.02-0.4 ppm. Therefore, the HCBS system can effectively combine the advantages of both homogeneous (high activity and good selectivity) and biphasic catalysis (easy catalyst separation). We additionally extended the application of the HCBS system to the hydrogenation of olefins to demonstrate the universality of the RTP-PolyGILs in catalytic reactions.
Heterogeneous hydroformylation of long-chain alkenes in IL-in-oil Pickering emulsion
Tao, Lin,Zhong, Mingmei,Chen, Jian,Jayakumar, Sanjeevi,Liu, Lina,Li, He,Yang, Qihua
, p. 188 - 196 (2018/01/12)
An efficient heterogeneous catalytic system for hydroformylation of long-chain alkenes is highly desirable for both academy and industry. In this study, an IL-in-oil Pickering emulsion system was employed for heterogeneous hydroformylation of 1-dodecene with Rh-sulfoxantphos as the catalyst and surface modified dendritic mesoporous silica nanospheres (DMSN) as the stabilizer. The IL-in-oil Pickering emulsion system outperformed IL-oil biphase, water-in-oil Pickering emulsion and IL-oil micelle system under similar reaction conditions to afford n/b ratio of 98:2, chemoselectivity of 94% and TOF of 413 h-1, among the highest ever reported for IL-oil biphase hydroformylation of long-chain alkenes. The high efficiency of IL-in-oil Pickering emulsion was primarily attributed to the increased interface area and unique properties of ILs. Studies also revealed that solid stabilizers with large and open pore channels could greatly increase the reaction rate of Pickering emulsion systems by accelerating the diffusion rate. The recyclable IL-in-oil Pickering emulsion is promising not only for hydroformylation of long-chain alkenes but also for catalytic reactions with immiscible liquids.
Nonaqueous Biphasic Hydroformylation of Long Chain Alkenes Catalyzed by Water Soluble Phosphine Rhodium Catalyst with Polyethylene Glycol Instead of Water
Zhao, Yuanjiang,Liu, Yanli,Wei, Jianzhang,Fu, Haiyan,Zheng, Xueli,Yuan, Maolin,Li, Ruixiang,Chen, Hua
, p. 438 - 442 (2017/12/04)
Abstract: The application of polyethylene glycol (donated as PEG), as an environmentally benign solvent instead of water, in rhodium catalyzed hydroformylation of long chain alkenes by using water soluble phosphine BISBIS or TPPTS (TPPTS: sodium salt of sulfonated triphenylphosphine, BISBIS: sodium salt of sulfonated 2,2′-bis(diphenylphosphinomethyl)-1,1′-biphenyl) is herein reported. The conversion of long chain alkenes in PEG-200 could reach above 95.0% after a short reaction time (15?min). In addition, an efficient phase separation and recycling of PEG-200 and catalyst were achieved. The leaching of rhodium into product phase detected by ICP-AES was less than 0.06?wt% of the initial amount. Graphical Abstract: [Figure not available: see fulltext.].
Iron Catalyzed Hydroformylation of Alkenes under Mild Conditions: Evidence of an Fe(II) Catalyzed Process
Pandey, Swechchha,Raj, K. Vipin,Shinde, Dinesh R.,Vanka, Kumar,Kashyap, Varchaswal,Kurungot, Sreekumar,Vinod,Chikkali, Samir H.
supporting information, p. 4430 - 4439 (2018/04/05)
Earth abundant, first row transition metals offer a cheap and sustainable alternative to the rare and precious metals. However, utilization of first row metals in catalysis requires harsh reaction conditions, suffers from limited activity, and fails to tolerate functional groups. Reported here is a highly efficient iron catalyzed hydroformylation of alkenes under mild conditions. This protocol operates at 10-30 bar syngas pressure below 100 °C, utilizes readily available ligands, and applies to an array of olefins. Thus, the iron precursor [HFe(CO)4]-[Ph3PNPPh3]+ (1) in the presence of triphenyl phosphine catalyzes the hydroformylation of 1-hexene (S2), 1-octene (S1), 1-decene (S3), 1-dodecene (S4), 1-octadecene (S5), trimethoxy(vinyl)silane (S6), trimethyl(vinyl)silane (S7), cardanol (S8), 2,3-dihydrofuran (S9), allyl malonic acid (S10), styrene (S11), 4-methylstyrene (S12), 4-iBu-styrene (S13), 4-tBu-styrene (S14), 4-methoxy styrene (S15), 4-acetoxy styrene (S16), 4-bromo styrene (S17), 4-chloro styrene (S18), 4-vinylbenzonitrile (S19), 4-vinylbenzoic acid (S20), and allyl benzene (S21) to corresponding aldehydes in good to excellent yields. Both electron donating and electron withdrawing substituents could be tolerated and excellent conversions were obtained for S11-S20. Remarkably, the addition of 1 mol % acetic acid promotes the reaction to completion within 16-24 h. Detailed mechanistic investigations revealed in situ formation of an iron-dihydride complex [H2Fe(CO)2(PPh3)2] (A) as an active catalytic species. This finding was further supported by cyclic voltammetry investigations and intermediacy of an Fe(0)-Fe(II) species was established. Combined experimental and computational investigations support the existence of an iron-dihydride as the catalyst resting state, which then follows a Fe(II) based catalytic cycle to produce aldehyde.
Multiphasic aqueous hydroformylation of 1-alkenes with micelle-like polymer particles as phase transfer agents
Bibouche, Bachir,Peral, Daniel,Stehl, Dmitrij,S?derholm, Viktor,Schom?cker, Reinhard,Von Klitzing, Regine,Vogt, Dieter
, p. 23332 - 23338 (2018/07/10)
Micelle-like polymer particles have been applied in aqueous multiphasic hydroformylation reactions of long chain alkenes. These colloids act as phase transfer agents for the nonpolar substrates and as carriers for the catalyst bearing sulfonated ligands by electrostatic attraction. The catalyst performance and the phase separation were optimized with special focus on the conversion, selectivity and catalyst recovery, as those are key points in multiphasic systems to achieve a feasible industrial process. The effect on the catalyst performance of the number of sulfonate groups and electron withdrawing trifluoromethyl groups in the ligand has been studied. The approach was successfully demonstrated for 1-alkenes from 1-hexene to 1-dodecene. For 1-octene, a TOF of more than 3000 h?1 could be achieved at a substrate to catalyst ratio of 80?000, while keeping the rhodium and phosphorous leaching below 1 ppm. In repetitive batch experiments the catalyst was recycled four times, yielding an accumulated TON of more than 100?000 for 1-octene.
Based on [...] functionalized polyether alkyl guanidine salt ion liquid of the two-phase hydroformylation of olefins method
-
Paragraph 0045; 0046; 0047; 0062, (2018/09/26)
The present invention relates to a method for biphasic hydroformaylation of olefins based on a phosphine-functionalized polyether alkyl guanidine salt ionic liquid. A biphasic catalytic system is used in the method, wherein the catalytic system consists of the phosphine-functionalized polyether alkyl guanidine salt ionic liquid, a rhodium catalyst, a reaction substrate - olefins and a reaction product - aldehydes; liquid/liquid biphasic hydroformylation of olefins is performed at a certain reaction temperature and syngas pressure; the phosphine-functionalized polyether alkyl guanidine salt ionic liquid acts both as a phosphine ligand and as a rhodium catalyst carrier; there is no need to add any other ionic liquid to the system; separation and recycling of the rhodium catalyst are realized by liquid/liquid biphasic separation after the reaction; the rhodium catalyst is capable of being recycled for multiple times with no obvious decrease in catalytic activity or selectivity; the TOF value of the system reaches 240-2700h-1; and the highest catalytic cycle cumulative TON value reaches 47138.
Supported rhodium liquid metal catalysts for the hydroformylation of olefins
Sun, Hao,Guo, Wanwan,Liu, Junmei,Feng, Zhipeng,Li, Ruyue,Zhou, Xuyang,Huang, Jun
, (2018/09/25)
The hydroformylation of olefins in supported room temperature liquid metals was developed, and the supported Rh liquid metal catalysts (Rh SLMCs) showed unprecedented activity and high selectivity for the hydroformylation of olefins to aldehydes. The turnover frequency is up to 7000?h?1, much higher than that of homogeneous RhCl3?+?3PPh3 catalyst. Moreover, the Rh SLMCs can be recovered conveniently without obvious deactivation, and the total turnover number is up to 250?000. The active Rh(I) catalyst formed in situ can be reduced back to Rh(0) by the free electrons in liquid metal when H2/CO gas is emitted, and thus Rh is not leaked into the organic solvent. Long-chain olefins, cycloolefins and styrenes were applied, and the corresponding aldehydes were obtained in good to excellent yields.
Efficient water-soluble catalytic system RhI-CAP for biphasic hydroformylation of olefins
Eliseev, Oleg L.,Bondarenko, Tatyana N.,Britvin, Sergey N.,Khodorchenko, Polina P.,Lapidus, Albert L.
, p. 264 - 266 (2018/06/01)
Rhodium-catalysed hydroformylation of styrene and aliphatic olefins under biphasic conditions in the presence of watersoluble 1,4,7-triaza-9-phosphatricyclo[5.3.2.14,9]tridecane (CAP) chemoselectively affords aldehydes. Multiple catalyst reuse without loss in performance is demonstrated.
