40154-93-6Relevant academic research and scientific papers
Sulfoxide and Sulfone Synthesis via Electrochemical Oxidation of Sulfides
Lee, Sunwoo,Park, Jin Kyu
, p. 13790 - 13799 (2021/10/12)
The oxidation of diaryl sulfides and aryl alkyl sulfides to the corresponding sulfoxides and sulfones under electrochemical conditions is reported. Sulfoxides are selectively obtained in good yield under a constant current of 5 mA for 10 h in DMF, while sulfones are formed as the major product under a constant current of 10 or 20 mA for 10 h in MeOH. The oxygen of both the sulfoxide and sulfone function is derived from water.
Selective oxidation of (hetero)sulfides with molecular oxygen under clean conditions
Liu, Kai-Jian,Deng, Ji-Hui,Yang, Jie,Gong, Shao-Feng,Lin, Ying-Wu,He, Jun-Yi,Cao, Zhong,He, Wei-Min
supporting information, p. 433 - 438 (2020/02/13)
The development of eco-friendly and switchable catalytic systems for the conversion of a sole raw-material into distinct high-value products is a particularly attractive concept and a daunting synthetic challenge. In the present work, the first example of efficient and selective oxidation of sulfides to sulfones and sulfoxides using molecular oxygen under clean conditions was established.
Oxidation of aromatic sulfides with molecular oxygen: Controllable synthesis of sulfoxides or sulfones
Tang, Lili,Du, Kejie,Yu, Bing,He, Liangnian
, p. 2991 - 2992 (2020/03/24)
The recent development of selective oxidation of aromatic sulfides with molecular oxygen was highlighted. The sulfoxides and sulfones could be obtained by simply switching the reaction media, i.e., bis(2-butoxyethyl)ether (BBE) or poly(ethylene glycol)dimethyl ether (PEGDME). The application of the high-boiling-point polyether as an initiator and green media can eliminate the need of large quantities of additives and volatile solvents. This strategy represents an economic and eco-friendly method that could find potential applications.
Synthesis and nano-Pd catalyzed chemoselective oxidation of symmetrical and unsymmetrical sulfides
Li, Xing,Du, Jia,Zhang, Yongli,Chang, Honghong,Gao, Wenchao,Wei, Wenlong
, p. 3048 - 3055 (2019/03/21)
A highly chemoselective, efficient and nano-Pd catalyzed protocol for the rapid construction of sulfoxides and sulfones via the oxidation of symmetrical and unsymmetrical sulfides using H2O2 as an oxidant has been developed, respectively. The ready availability of starting materials, easy recovery and reutilization of the catalyst, wide substrate scope, and high yields make this protocol an attractive alternative. The process also involves the metal-free and microwave-promoted synthesis of symmetrical diarylsulfides, and FeCl3-mediated preparation of symmetrical diaryldisulfides through the reaction of arenediazonium tetrafluoroborates with Na2S·9H2O as a sulfur source. In addition, unsymmetrical sulfides were generated via the K2CO3-mediated reaction of arenediazonium tetrafluoroborates with symmetrical disulfides.
Catalyst-free visible-light-initiated oxidative coupling of aryldiazo sulfones with thiols leading to unsymmetrical sulfoxides in air
Liu, Qishun,Wang, Leilei,Yue, Huilan,Li, Jiang-Sheng,Luo, Zidan,Wei, Wei
supporting information, p. 1609 - 1613 (2019/04/08)
A facile and efficient visible-light-driven method has been developed to construct sulfoxides via oxidative coupling of aryldiazo sulfones with thiols using the O2 in air as the oxidant. This reaction could be performed at room temperature under catalyst- and additive-free conditions. The present methodology offers a mild and environmentally benign approach to obtain a library of sulfoxides in good yields with favorable functional group tolerance.
Method for preparing visible light promoted asymmetric sulfoxide compound
-
Paragraph 0049; 0050, (2019/06/11)
The invention belongs to the field of organic synthetic chemistry, particularly relates to a preparation method of an asymmetric sulfoxide compound, and particularly discloses a method for synthesizing the asymmetric sulfoxide compound based on visible light catalysis. A compound shown in the formula I and a compound shown in the formula II are added to a reactor, a mixture of an organic solvent and water is added as a reaction solvent, the reactor is connected to air, under the irradiation of visible light, a reaction at a room temperature is performed for 16-40 hours; and after a detection reaction of a TLC thin layer chromatography plate is completed, pure water is added, then the extraction is performed, extract liquid is combined and dried, the extract liquid is concentrated and purified to obtain a compound shown in the formula III, and the compound is the asymmetric sulfoxide compound. The reaction conditions are mild, energy is clean, a strong oxidant is not needed, the safetyof the reaction is improved, the pollution caused by using a metal reagent is avoided, and the reaction cost is saved.
Palladium/PC-Phos-Catalyzed Enantioselective Arylation of General Sulfenate Anions: Scope and Synthetic Applications
Wang, Lei,Chen, Mingjie,Zhang, Peichao,Li, Wenbo,Zhang, Junliang
, p. 3467 - 3473 (2018/03/13)
Herein we reported an efficient palladium-catalyzed enantioselective arylation of both alkyl and aryl sulfenate anions to deliver various chiral sulfoxides in good yields (up to 98%) with excellent enantioselectivities (up to 99% ee) by the use of our developed chiral O,P-ligands (PC-Phos). PC-Phos are easily prepared in short steps from inexpensive commercially available starting materials. The single-crystal structure of the PC4/PdCl2 showed that a rarely observed 11-membered ring was formed via the O,P-coordination with the palladium(II) center. The salient features of this method include general substrate scope, ease of scale-up, applicable to the late-stage modification of bioactive compounds, and the synthesis of a marketed medicine Sulindac.
Aryl sulfoxide, thioether compound, synthesis method and application thereof
-
Paragraph 0150-0153, (2018/04/21)
The invention discloses a method for selective synthesis of an aryl sulfoxide compound (III) and an aryl thioether compound (IV). According to the invention, in a reactive solvent, an aryl high iodinesalt is adopted as the reaction raw material, aryl/alkyl thiosulfate is taken as the vulcanizing reagent, under the catalysis of visible light and a photosensitive reagent, and under the action of lewis acid and alkali, when the reaction atmosphere is nitrogen, the thioether compound (IV) can be generated, and when the reaction atmosphere is air, the sulfoxide compound (III) can be generated. Thesynthesis method provided by the invention has the advantages of easily available and cheap raw materials, simple reaction operation, mild and environment-friendly reaction conditions, high yield, and excellent functional group tolerance. The invention also discloses the new aryl sulfoxide compound (III) and aryl thioether compound (IV), also successfully realizes later modification of drugs andsugar, and realizes the formal synthesis of some drugs, and provides an efficient method for selective construction of thioether and sulfoxide compounds.
Controllable Sulfoxidation and Sulfenylation with Organic Thiosulfate Salts via Dual Electron- and Energy-Transfer Photocatalysis
Li, Yiming,Wang, Ming,Jiang, Xuefeng
, p. 7587 - 7592 (2017/11/10)
Sulfoxides and sulfides are two important functional groups in organic molecules, containing different valence states of sulfur. Both sulfoxidation and sulfenylation with common sulfurating reagents were successfully tuned via a facile variation of the atmosphere under photocatalyzed conditions. The sulfoxidation and sulfenylation transformations involved tandem electron-/energy-transfer and single-electron-transfer processes, respectively. Late-stage sulfoxidation for pharmaceuticals and sugar derivatives was established to be highly compatible. Divergent formal syntheses of sulfoxide/sulfide-containing marketed pharmaceuticals were switchably implemented. Gram-scale operations further demonstrated the practicability of the protocol.
Palladium-Catalyzed Arylation of Aryl Sulfenate Anions with Aryl Bromides under Mild Conditions: Synthesis of Diaryl Sulfoxides
Jiang, Hui,Jia, Tiezheng,Zhang, Mengnan,Walsh, Patrick J.
supporting information, p. 972 - 975 (2016/03/15)
A palladium-catalyzed arylation of aryl sulfenate anions generated from aryl 2-(trimethylsilyl)ethyl sulfoxides and CsF has been developed. This protocol is effective for the synthesis of diaryl sulfoxides and heteroaryl aryl sulfoxides under mild conditions employing aryl bromides. Various functional groups, including those with acidic protons, are well tolerated.
