42454-25-1Relevant academic research and scientific papers
The direct iodination of arenes with chromium(VI) oxide as the oxidant
Lulinski, Piotr,Skulski, Lech
, p. 1665 - 1669 (1997)
An easy and cheap laboratory method is presented for the direct mono- and diiodination of a number of activated and deactivated arenes. The main iodination reactions occurred at the temperatures not exceeding 65°C for 0.5-12 h in the anhydrous, strongly acidic liquid system, I2/AcOH/Ac2O/H2SO4, in the presence of prior dissolved CrO3 used as the oxidant. The yields of the pure iodinated products varied from 31% (for 3,5- diiodobenzoic acid) up to 90% (for 4-iodoanisole). So far, benzonitrile and some oxidizable aromatics, e.g. naphthalene, fluorene, xanthene, and thiophene, have been found to be unsuitable for the effective iodination. Nevertheless, this novel, simple method of direct iodination is worthy to be extended to other appropriate aromatics.
Lifting Triplet Energy and Bipolar Characteristics by Limiting the Rotation of the Peripheral Groups in Host Materials to Achieve High-Efficiency Blue OLED
Liang, Xiaozhong,Liu, Zemei,Xia, Yan,Li, Da,Li, Jie,Wang, Hua,Zhang, Zheng,Wang, Sijing,Zhao, Bo,Li, Zhijun,Xing, Yifan,Guo, Kunpeng
, (2022/01/08)
Bipolar host materials with high triplet energy are of great significance for highly efficient blue organic light-emitting diodes (OLEDs). In this work, three donor-acceptor-donor (D-A-D) type host materials with identical non-rigid diphenylsulfone center
Oxidative iodination of deactivated arenes in concentrated sulfuric acid with I2/NaIO4 and KI/NaIO4 iodinating systems
Kraszkiewicz, Lukasz,Sosnowski, Maciej,Skulski, Lech
, p. 1195 - 1199 (2007/10/03)
Deactivated arenes were mono- or diiodinated with strong electrophilic I+ reagents, which were prepared from NaIO4 and either I2 or KI in concentrated H2SO4 (minimum 95% by weight). In general a small excess of the dark brown iodinating solution was used (1.1/1.5 equivalents, for nitrobenzene two equivalents was required). The iodinations were conducted at 25-30 °C with a reaction time of 1-2 hours using either a 'direct' or an 'inverse' method of aromatic iodination to give mono- or diiodinated pure products in 31-91% optimized yields. Georg Thieme Verlag Stuttgart.
Easy, inexpensive and effective oxidative iodination of deactivated arenes in sulfuric acid
Kraszkiewicz, Lukasz,Sosnowski, MacIej,Skulski, Lech
, p. 9113 - 9119 (2007/10/03)
Two 'model' deactivated arenes, benzoic acid and nitrobenzene, were effectively monoiodinated within 1 h at 25-30 °C, with strongly electrophilic I+ reagents, prior prepared from diiodine and various oxidants (CrO3, KMnO4, active MnO2, HIO 3, NaIO3, or NaIO4) in 90% (v/v) concd sulfuric acid (ca. 75 mol% H2SO4). Next, an I2/ NaIO3/90% (v/v) concd H2SO4 exemplary system was used to effectively mono- or diiodinate a number of deactivated arenes. All former papers dealing with the direct iodination of deactivated arenes are briefly reviewed.
Novel aryl ether sulfones
-
, (2008/06/13)
Disclosed is an aryl ether sulfone of the following formula: STR1 wherein R1 is independently in each occurrence hydrogen, alkyl, alkoxy, aryl, aryloxy, polyhaloaryl, polyhaloaryloxy, polyhaloalkylaryl, or polyhaloalkylaryloxy, R2 is
