51581-54-5Relevant academic research and scientific papers
Copper pyrithione (CuPT)-catalyzed/mediated amination and thioarylation of (hetero)aryl halides: A competition
Cao, Ningtao,Song, Bao,Xie, Jianwei,Zhang, Jie
, (2021/11/08)
A facile method for the synthesis of N-arylheterocycles and di(hetero)aryl sulfides under mild condition is described. In these transformations, copper pyrithione (CuPT) was used as the copper catalyst for C─N coupling, while served as catalyst and coupled partner for C─S coupling with high yields and broad substrate tolerance. The S-arylation process was also utilized for the construction of valuable bioactive 2-sulfonylpyridine 1-oxide derivatives.
The Versatility of the Aryne-Imine-Aryne Coupling for the -Synthesis of Acridinium Photocatalysts
Hutskalova, Valeriia,Sparr, Christof
, (2021/07/31)
The increasing use of acridinium photocatalysts as sustainable alternative to precious metal-based counterparts encourages the design and efficient synthesis of distinct catalyst structures. Herein, we report our exploration of the scope of the aryne-imin
Immobilization of copper(II) into polyacrylonitrile fiber toward efficient and recyclable catalyst in Chan-Lam coupling reactions
Zhang, Chenlu,Zhu, Hai,Gang, Kaiyue,Tao, Minli,Ma, Ning,Zhang, Wenqin
, (2021/02/09)
A series of polyacrylonitrile fiber (PANF)-supported copper(II) catalysts were prepared through the immobilization of Cu(II) into prolinamide-modified PANF (PANPA-2F) and subsequently used for the synthesis of diverse N-arylimidazoles from arylboronic acids and imidazole. The prepared Cu(II)@PANPA-2Fs were well characterized by mechanical strength, FT-IR, XRD, XPS and SEM. Among them, CuCl2@PANPA-2F exhibited excellent catalytic performance, and its activity was significantly affected by the Cu loading. This catalytic system also displayed good activity in the synthesis of N-arylsulfonamides from arylboronic acids and tosyl azide. It was highly efficient in gram-scale reactions and could be reused five times. The advantages of low cost, easy preparation, good durability and facile recovery make the fiber catalyst attractive.
Cu(OAc)2-porphyrins as an efficient catalytic system for base-free, nature mimicking Chan–Lam coupling in water
Venkateswarlu, Katta,Rao, Kanusu Umamaheswara
, (2021/03/03)
The use of porphyrins as ligands in organic synthesis reveals the natural process, because these are the constituent motifs of catalysts in many bio-organic reactions. This article presents the synthesis of two N-pincer tetradentate porphyrins; tetrasodium meso-tetra(p-sulfonatophenyl)phorphyrin (H2TSTpSPP) and meso-tetra(m-carboxyphenyl)porphyrin (H2TmCPP), and study on their aptness for Cu-catalyzed C–N coupling reactions of arylboronic acids and amines (Chan–Lam coupling reaction) in water under external base free conditions. The porphyrins and Chan–Lam coupling products were well characterized by their spectral analysis. The high product yields, application of nature-inspired conditions, large extent of substrates, ease of making and handling the ligands, avoidance of base, and use of water as reaction media are the attractive attributes of this finding.
Facile synthesis of hydrochar supported copper nanocatalyst for Ullmann C–N coupling reaction in water
Ge, Xin,Ge, Meng,Chen, Xinzhi,Qian, Chao,Liu, Xuemin,Zhou, Shaodong
, (2019/12/24)
The exploration of inexpensive and stable heterogeneous catalysts and application of green solvents for Ullmann C–N coupling reaction remain challenging. We present a facile fabrication of copper nanoparticles on hydrochar as prepared from natural, inexpensive and renewable chitosan together with in-situ reduction of copper salt in a one-pot hydrothermal carbonization process. The copper nanoparticles were uniformly dispersed on hydrochar by choosing block copolymer F127 as surfactant. Moreover, maleic acid was introduced to improve the hydrophilicity of hydrochar. The most active copper nanocomposite catalyst, that is, Cu/HCS-MA-F127, exhibited excellent catalytic activity for Ullmann C–N coupling reaction in water. The nature of the Cu/HCS-MA-F127 was characterized by FTIR spectroscopy, TG, XRD, SEM and XPS. Moderate to excellent yields of aimed products were gained by using this catalytic strategy. Moreover, the Cu/HCS-MA-F127 catalyst can be reused by simple centrifugal recovery with a stable performance.
Copper quinolate: A simple and efficient catalytic complex for coupling reactions
Wu, Fengtian,Li, Huiqin,Xie, Jianwei
, (2019/11/22)
We describe an effective and novel method to prepare N-aryl imidazoles via the copper quinolate-catalyzed N-arylation of aryl halides and imidazoles. A wide range of products were obtained in moderate to excellent yields under the optimal reaction conditions. Applying standard conditions, the model reaction could be performed on a gram scale. This method also presents a new avenue to the “click” reaction of terminal alkynes, benzyl bromide, and sodium azide and to the construction of C–C bonds by homocoupling of phenylboronic acid or phenylacetylene derivatives with the aid of copper quinolate.
Intercalation of copper salt to montmorillonite K-10 and its application as a reusable catalyst for Chan–Lam cross-coupling reaction
Sarmah, Manashi,Dewan, Anindita,Boruah, Purna K.,Das, Manash R.,Bora, Utpal
, (2020/02/13)
A simple and efficient catalytic system has been developed by adsorption of copper salt in the interlayers of montmorillonite K-10. The catalytic system impressively exercises the green chemistry perspective leading to effortless recovery and recyclabilit
Tuning the Copper(II)/Copper(I) Redox Potential for More Robust Copper-Catalyzed C–N Bond Forming Reactions
Biswas, Saborni,Cope, James D.,Emerson, Joseph P.,Goel, Ekta,Hall, Ruby S.,Hendrich, Michael P.,Riley, Kathleen M.,Stokes, Sean L.,Valle, Henry U.,Wipf, David O.
supporting information, (2020/03/23)
Complexes of copper and 1,10-phenanthroline have been utilized for organic transformations over the last 50 years. In many cases these systems are impacted by reaction conditions and perform best under an inert atmosphere. Here we explore the role the 1,1
Cu2O/1-(2-methylhydrazine-1-carbonyl)-isoquinoline 2-oxide catalyzed C-N cross-coupling reaction in aqueous media
Xie, Jian-Wei,Yao, Zhen-Bin,Wang, Xiao-Chuang,Zhang, Jie
, p. 3788 - 3792 (2019/06/08)
An experimentally simple, efficient, and inexpensive catalyst system was developed for the N-arylation of imidazole, indole, pyrrole, alkyl alcohol amines, and alkyl amines with aryl iodides and bromides. The reaction proceeds in water-ethanol media at 120 °C for 12 h with Cu2O as the catalyst, 1-(2-methylhydrazine-1-carbonyl)-isoquinoline 2-oxide (L2) as the ligand, NaOH as the base to generate a wide range of N-arylated products in moderate to excellent yields. Aqueous medium, ease of operation, and broad substrate scope give the process a benign environmental profile.
High-performance sono/nano-catalytic system: CTSN/Fe3O4-Cu nanocomposite, a promising heterogeneous catalyst for the synthesis of: N -arylimidazoles
Taheri-Ledari, Reza,Hashemi, Seyed Masoud,Maleki, Ali
, p. 40348 - 40356 (2019/12/25)
Herein, a promising heterogeneous nanoscale catalytic system constructed of chitosan (CTSN, as a polymeric basis), iron oxide nanoparticles (Fe3O4 NPs, as the magnetic agent), and copper oxide nanoparticles (CuO NPs, as the main cata
