605-48-1Relevant academic research and scientific papers
Biocatalytic chlorination of aromatic hydrocarbons by chloroperoxidase of caldariomyces fumago
Vazquez-Duhalt, Rafael,Ayala, Marcela,Marquez-Rocha, Facundo J.
, p. 929 - 933 (2001)
Chloroperoxidase from Caldariomyces fumago was able to chlorinate 17 of 20 aromatic hydrocarbons assayed in the presence of hydrogen peroxide and chloride ions. Reaction rates varied from 0.6 min-1 for naphthalene to 758 min-1 for 9-methylanthracene. Mono-, di- and tri-chlorinated compounds were obtained from the chloroperoxidase-mediated reaction on aromatic compounds. Dichloroacenaphthene, trichloroacenaphthene 9,10-dichloroanthracene, chloropyrene, dichloropyrene, dichlorobiphenylene and trichlorobiphenylene were identified by mass spectral analyses as products from acenaphthene, anthracene, pyrene and biophenylene respectively. Polycyclic aromatic hydrocarbons with 5 and 6 aromatic rings were also substrates for the chloroperoxidase reaction. The importance of the microbial chlorination of aromatic pollutants and its potential environmental impact are discussed.
Triptycenyl Sulfide: A Practical and Active Catalyst for Electrophilic Aromatic Halogenation Using N-Halosuccinimides
Nishii, Yuji,Ikeda, Mitsuhiro,Hayashi, Yoshihiro,Kawauchi, Susumu,Miura, Masahiro
supporting information, p. 1621 - 1629 (2020/02/04)
A Lewis base catalyst Trip-SMe (Trip = triptycenyl) for electrophilic aromatic halogenation using N-halosuccinimides (NXS) is introduced. In the presence of an appropriate activator (as a noncoordinating-anion source), a series of unactivated aromatic compounds were halogenated at ambient temperature using NXS. This catalytic system was applicable to transformations that are currently unachievable except for the use of Br2 or Cl2: e.g., multihalogenation of naphthalene, regioselective bromination of BINOL, etc. Controlled experiments revealed that the triptycenyl substituent exerts a crucial role for the catalytic activity, and kinetic experiments implied the occurrence of a sulfonium salt [Trip-S(Me)Br][SbF6] as an active species. Compared to simple dialkyl sulfides, Trip-SMe exhibited a significant charge-separated ion pair character within the halonium complex whose structural information was obtained by the single-crystal X-ray analysis. A preliminary computational study disclosed that the πsystem of the triptycenyl functionality is a key motif to consolidate the enhancement of electrophilicity.
Selective Halogenation Using an Aniline Catalyst
Samanta, Ramesh C.,Yamamoto, Hisashi
supporting information, p. 11976 - 11979 (2015/08/18)
Electrophilic halogenation is used to produce a wide variety of halogenated compounds. Previously reported methods have been developed mainly using a reagent-based approach. Unfortunately, a suitable "catalytic" process for halogen transfer reactions has yet to be achieved. In this study, arylamines have been found to generate an N-halo arylamine intermediate, which acts as a highly reactive but selective catalytic electrophilic halogen source. A wide variety of heteroaromatic and aromatic compounds are halogenated using commercially available N-halosuccinimides, for example, NCS, NBS, and NIS, with good to excellent yields and with very high selectivity. In the case of unactivated double bonds, allylic chlorides are obtained under chlorination conditions, whereas bromocyclization occurs for polyolefin. The reactivity of the catalyst can be tuned by varying the electronic properties of the arene moiety of catalyst.
A practical lewis base catalyzed electrophilic chlorination of arenes and heterocycles
Maddox, Sean M.,Nalbandian, Christopher J.,Smith, Davis E.,Gustafson, Jeffrey L.
supporting information, p. 1042 - 1045 (2015/03/30)
A mild phosphine sulfide catalyzed electrophilic halogenation of arenes and heterocycles that utilizes inexpensive and readily available N-halosuccinimides is disclosed. This methodology is shown to efficiently chlorinate diverse aromatics, including simple arenes such as anthracene, and heterocycles such as indoles, pyrrolopyrimidines, and imidazoles. Arenes with Lewis acidic moieties also proved amenable, underscoring the mild nature of this chemistry. Lewis base catalysis was also found to improve several diverse aromatic brominations and iodinations.
Features of the Diels-Alder reaction between 9,10-diphenylanthracene and 4-phenyl-1,2,4-triazoline-3,5-dione
Kiselev,Kornilov,Kashaeva,Potapova,Krivolapov,Litvinov,Konovalov
, p. 2073 - 2080 (2015/02/19)
The Diels-Alder reaction between substituted anthracenes 1a-1j and 4-phenyl-1,2,4-triazoline-3,5 (2) is studied. In all cases except one, the reaction proceeds on the most active 9,10-atoms of substituted anthracenes. The orthogonality of the two phenyl groups at the 9,10-position of diene 1a is found to shield 9,10-reactive centers. No dienophiles with C=C bonds are shown to participate in the Diels-Alder reaction with 1a; however, the reaction 1a + 2 proceeds with the very active dienophile 2,4-phenyl-1,2,4-triazoline-3,5-dione. It is shown that attachment occurs on the less active but sterically accessible 1,4-reactive center of diene 1a. The structure of adduct 3a is proved by 1H and 13C NMR spectroscopy and X-ray diffraction analysis. The following parameters are obtained for reaction 1a + 2 ? 3a in toluene at 25°C: Keq = 2120 M-1, ΔHf≠ = 58.6 kJ/mol, ΔSf≠ = -97 J/(mol K), ΔVf≠ = -17.2 cm3/mol, ΔHb ≠ = 108.8 kJ/mol, ΔSb≠ = 7.3 J/(mol K), ΔVb≠ = -0.8 cm3/mol, ΔHr-n = -50.2 kJ/mol, ΔSr-n = -104.3 J/(mol K), ΔVr-n = -15.6 cm3/mol. It is concluded that the values of equilibrium constants of the reactions 1a-1j + 2 ? 3a-3j vary within 4 × 101-1011 M-1.
Photochemical molecular storage of Cl2, HCl, and COCl 2: Synthesis of organochlorine compounds, salts, ureas, and polycarbonate with photodecomposed chloroform
Kuwahara, Yuki,Zhang, Ailing,Soma, Haruka,Tsuda, Akihiko
supporting information; experimental part, p. 3376 - 3379 (2012/08/08)
Chloroform is available as not only an organic solvent but also photochemical molecular storage for synthetically important chemicals such as Cl2, HCl, and COCl2. We have succeeded in synthesizing organochlorine compounds, hydrochloric salt of amines, ureas, organic carbonates, and polycarbonate in practical high yields with photodecomposed chloroform.
Aromatic substitution in ball mills: Formation of aryl chlorides and bromides using potassium peroxomonosulfate and NaX
Schmidt, Robert,Stolle, Achim,Ondruschka, Bernd
, p. 1673 - 1679 (2013/02/22)
Aryl chlorides and bromides are formed from arenes in a ball mill using KHSO5 and NaX (X = Cl, Br) as oxidant and halogen source, respectively. Investigation of the reaction parameters identified operating frequency, milling time, and the number of milling balls as the main influencing variables, as these determine the amount of energy provided to the reaction system. Assessment of liquid-assisted grinding conditions revealed, that the addition of solvents has no advantageous effect in this special case. Preferably activated arenes are halogenated, whereby bromination afforded higher product yields than chlorination. Most often reactions are regio- and chemoselective, since p-substitution was preferred and concurring side-chain oxidation of alkylated arenes by KHSO5 was not observed. The Royal Society of Chemistry.
Dynamic Covalent chemistry: A facile room-temperature, reversible, diels-alder reaction between anthracene derivatives and n-phenyltriazolinedione
Roy, Nabarun,Lehn, Jean-Marie
supporting information; experimental part, p. 2419 - 2425 (2012/07/03)
A series of readily accessible, dynamic Diels-Alder reactions that are reversible at room temperature have been developed between anthracene derivatives as dienes and N-phenyl-1,2,4-triazoline-3,5-dione as the dienophile. The adducts formed undergo reversible component exchange to form dynamic libraries of equilibrating cycloadducts. Furthermore, reversible adduct formation allows temperature-dependent modulation of the fluorescent properties of anthracene components; a feature of potential interest for the design of optodynamic polymeric materials by careful selection and manipulation of these simple dienes and dienophiles. Copyright
The halogenation of aliphatic C-H bonds with peracetic acid and halide salts
He, Yu,Goldsmith, Christian R.
supporting information; experimental part, p. 1377 - 1380 (2010/08/06)
Hydrocarbons react with molar concentrations of peracetic acid and halide salts to yield predominantly monohalogenated products under optimum conditions, with chlorination being more oxidatively efficient than bromination. The alkane halogenation proceeds at ambient temperature and does not require a heavy-metal catalyst. The observed reactivity is consistent with a radical mechanism, in which the peracid initially reacts with the halide ions to yield halogen-atom radicals, which ultimately oxidize the hydrocarbon. Although the reactivity proceeds slightly more efficiently in acetonitrile, the halogenation protocol works well in water.
Comparative study of the reactivity of iodinating agents in solution and solid phase
Krasnokutskaya,Lesina,Gorlushko,Filimonov
, p. 855 - 859 (2007/10/03)
The results of reactions of a series of aromatic substrates with iodine, iodine(I) chloride, and N-iodosuccinimide in solution and solid phase were compared for the first time. In all cases, the general relations holding in the iodination process were similar. Iodine(I) chloride was found to chlorinate anthracene. A high efficiency of solid-phase iodination of β-diketones was demonstrated using dibenzoylmethane as an example.
