6638-05-7Relevant academic research and scientific papers
Phosphoric acid-modified commercial kieselguhr supported palladium nanoparticles as efficient catalysts for low-temperature hydrodeoxygenation of lignin derivatives in water
Cui, Yuntong,Liu, Zhaohui,Ran, Jiansu,Wang, Jianjian,Yangcheng, Ruixue
, p. 1570 - 1577 (2022/03/14)
Efficient production of high value-added chemicals and biofuels via low-temperature chemoselective HDO of lignin derivatives in water is still a challenge. Here, we construct a low-cost, active and stable Pd/PCE catalyst using phosphoric acid-modified commercial Celite (PCE) as the support, and this catalyst exhibits excellent activity in low-temperature HDO of vanillin as well as other lignin derivatives in water. The superior catalytic performance is due to the presence of P species on the surface of Pd/PCE, accelerating the selective conversion of the intermediate into the final product. Detailed experimental and mechanistic studies reveal that the rapid conversion of the intermediate to the final product proceeds via a free-radical process in an interfacial microenvironment created by intimate interacting between the P species and Pd NPs. The insights of this work provide a new low-cost catalytic system for efficient production of valuable chemicals and future biofuels from lignin derivatives. This journal is
Ceria-promoted Co@NC catalyst for biofuel upgrade: synergy between ceria and cobalt species
Wang, Bowei,Gao, Ruixiao,Zhang, Dan,Zeng, Yuyao,Zhang, Fangying,Yan, Xilong,Li, Yang,Chen, Ligong
supporting information, p. 8541 - 8553 (2021/04/12)
Ceria-promoted Co@NC (NC, N doped carbon) catalysts are prepared by pyrolysis of biomass materials. Characterization results indicate that ceria and Co species facilitate the distribution of each other due to the formation of a Ce-O-Co solid solution. The specific surface area of the catalyst increased from 378.77 to 537.7 m2g?1viathe introduction of ceria. The electron transfer from Co to Ce further enhanced their interaction, and Co species facilitate the formation of more defective oxygen vacancies on ceria, which are beneficial to the activities of catalytic hydrogenation and catalytic transfer hydrogenation (CTH), respectively. Thus, Co/Ce@NC (0.99% Co loading) pyrolyzed at 850 °C exhibits excellent performance in the hydrodeoxygenation (HDO) of vanillin with high metal utilization. Catalytic hydrogenation and CTH coexisted in the presence of H2and ethanol, and >99% yield of creosol can be obtained in each of them. The reaction processes are monitored. No intermediate is found in aqueous media, while ethoxymethyl-4-methoxy-2-phenol is detected in ethanol. Moreover, Co/Ce@NC presents outstanding stability and general applicability. This work provides new insights into the construction of M@NC (M, metal) catalysts and the HDO process of biofuel upgrade.
Encapsulated Ni-Co alloy nanoparticles as efficient catalyst for hydrodeoxygenation of biomass derivatives in water
Chen, Chun,Gong, Wanbing,Han, Miaomiao,Wang, Dongdong,Wang, Guozhong,Zhang, Haimin,Zhang, Jifang,Zhang, Yunxia,Zhao, Huijun
, p. 2027 - 2037 (2021/09/02)
Catalytic hydrodeoxygenation (HDO) is one of the most promising strategies to transform oxygen-rich biomass derivatives into high value-added chemicals and fuels, but highly challenging due to the lack of highly efficient nonprecious metal catalysts. Herein, we report for the first time of a facile synthetic approach to controllably fabricate well-defined Ni-Co alloy NPs confined on the tip of N-CNTs as HDO catalyst. The resultant Ni-Co alloy catalyst possesses outstanding HDO performance towards biomass-derived vanillin into 2-methoxy-4-methylphenol in water with 100% conversion efficiency and selectivity under mild reaction conditions, surpassing the reported high performance nonprecious HDO catalysts. Impressively, our experimental results also unveil that the Ni-Co alloy catalyst can be generically applied to catalyze HDO of vanillin derivatives and other aromatic aldehydes in water with 100% conversion efficiency and over 90% selectivity. Importantly, our DFT calculations and experimental results confirm that the achieved outstanding HDO catalytic performance is due to the greatly promoted selective adsorption and activation of C=O, and desorption of the activated hydrogen species by the synergism of the alloyed Ni-Co NPs. The findings of this work affords a new strategy to design and develop efficient transition metal-based catalysts for HDO reactions in water.
Selective upgrading of biomass-derived benzylic ketones by (formic acid)–Pd/HPC–NH2 system with high efficiency under ambient conditions
Chen, Yuzhuo,Chen, Zhirong,Gong, Yutong,Mao, Shanjun,Ning, Honghui,Wang, Yong,Wang, Zhenzhen
, p. 3069 - 3084 (2021/11/16)
Upgrading biomass-derived phenolic compounds provides a valuable approach for the production of higher-value-added fuels and chemicals. However, most established catalytic systems display low hydrodeoxygenation (HDO) activities even under harsh reaction conditions. Here, we found that Pd supported on –NH2-modified hierarchically porous carbon (Pd/HPC–NH2) with formic acid (FA) as hydrogen source exhibits unprecedented performance for the selective HDO of benzylic ketones from crude lignin-derived oxygenates. Designed experiments and theoretical calculations reveal that the H+/H? species generated from FA decomposition accelerates nucleophilic attack on carbonyl carbon in benzylic ketones and the formate species formed via the esterification of intermediate alcohol with FA expedites the cleavage of C–O bonds, achieving a TOF of 152.5 h?1 at 30°C for vanillin upgrading, 15 times higher than that in traditional HDO processes (～10 h?1, 100°C–300°C). This work provides an intriguing green route to produce transportation fuels or valuable chemicals from only biomass under mild conditions.
Profiling of the formation of lignin-derived monomers and dimers from: Eucalyptus alkali lignin
Hu, Zhenhua,Li, Suxiang,Lu, Fachuang,Shi, Lanlan,Wang, Chen,Yue, Fengxia,Zhang, Han,Zhao, Chengke
supporting information, p. 7366 - 7375 (2020/11/18)
Lignin is a renewable and the most abundant aromatic source that can be used for extensive chemicals and materials. Although approximately 50 million tons of lignin are produced annually as a by-product of the pulp and paper industry, it is currently underutilized. It is important to know the structural features of technical lignin when considering its application. In this work, we have demonstrated the formation of low-molecular-weight constituents from hardwood (Eucalyptus) lignin, which produces much more low-molecular-weight constituents than softwood (spruce) lignin, after a chemical pulping process, and analyzed the micromolecular compositions in the alkali lignin after fractionation by dichloromethane (DCM) extraction. By applying analytical methods (gel-permeation chromatography, 2D NMR and GC-MS) with the aid of evidence from authenticated compounds, a great treasure trove of lignin-derived phenolic compounds from Eucalyptus alkali lignin were disclosed. Except for some common monomeric products, as many as 15 new lignin-derived monomers and dimers including syringaglycerol, diarylmethane, 1,2-diarylethanes, 1,2-diarylethenes, (arylvinyl ether)-linked arylglycerol dimers and isomeric syringaresinols were identified in the DCM-soluble fraction. Regarding the formation and evolution of the Cα-condensed β-aryl ether structure, a novel route that is potentially responsible for the high content of β-1 diarylethenes and diarylethanes in the lignin low-molecular-weight fraction, in addition to the β-1 (spirodienone) pathway, was proposed. This work not only provides novel insights into the chemical transformation of S-G lignin during the alkali pulping process, but also discovered lignin-derived phenolic monomers and dimers that can potentially be used as raw materials in the chemical or pharmaceutical industries. This journal is
Atomically Dispersed Co Catalyst for Efficient Hydrodeoxygenation of Lignin-Derived Species and Hydrogenation of Nitroaromatics
Du, Congcong,Gao, Shutao,Gao, Yongjun,Huang, Jianyu,Meng, Tao,Qiao, Yuqing,Shang, Ningzhao,Shen, Tongde,Wang, Chun,Wang, Haijun,Wang, Junmin,Wang, Zhi,Wu, Qiuhua,Zhang, Longkang
, p. 8672 - 8682 (2020/09/18)
Single-atom catalysts (SACs) have attracted much attention due to their outstanding catalytic performance in heterogeneous catalysis. Here, we report a template sacrificial method to fabricate an atomically dispersed Co catalyst; three kinds of silica templates with different microstructures (MCM-41, SBA-15, and FDU-12) were employed and the effect of pore structure of the templates on the dispersity of Co was investigated. The catalysts fabricated with different templates presented different Co dispersities, leading to distinguishing catalytic performance. The optimized Co1?NC-(SBA) catalyst with atomically dispersed Co displayed outstanding catalytic activity for the hydrodeoxygenation (HDO) of lignin-derived species as well as the hydrogenation of various nitroaromatics. The reaction mechanism of the HDO of vanillin was investigated by using density functional theory calculations as well.
Nickel-catalyzed intelligent reductive transformation of the aldehyde group using hydrogen
Tong, Xinli,Guo, Pengfei,Liao, Shengyun,Xue, Song,Zhang, Haigang
, p. 5828 - 5840 (2019/11/11)
The selective transformation of the aldehyde group (-CHO) in multifunctional oxygenates is a key challenge in the development of sustainable biomass feedstock. Herein, a smart Ni-MFC catalyst was developed from a 2D Ni-based metal-organic framework (MOF), which efficiently promoted the transformation of -CHO in the presence of H2 to a methyl group (-CH3) via the reductive etherification and hydrogenolysis of the C-O ether bond in methanol. Moreover, the catalytic process could be controlled to directionally produce methyl ether (-CH2OR) using the reductive etherification protocol. For the catalytic reduction of vanillin, the Ni-MFC-700 catalyst guaranteed the full conversion of vanillin and 96.5% yield of the desired 2-methoxy-4-methylphenol (MMP), while the Ni-MFC-500 catalyst afforded about 82.7% yield of 4-(methoxymethyl)-2-methoxyphenol in methanol solvent. This is a novel and promising approach for the valorization of multifunctional oxygenates and biomass-derived platform compounds.
Method for selective demethylation of ortho-trimethoxybenzene compounds
-
Page/Page column 6, (2017/04/03)
The invention relates to a method for selective demethylation of ortho-trimethoxybenzene compounds and provides a method for preparation of 2,6-dimethoxyphenol derivatives by selective demethylation of ortho-trimethoxybenzene in different substitution types. By taking substitutional or non-substitutional ortho-trimethoxybenzene as a raw material, taking ZrCl4 as a catalyst and taking anisole as an additive, a ratio of the raw material to the catalyst to the additive is optimized in a reaction process to realize selective demethylation at a low reaction temperature ranging from the room temperature to 60 DEG C. The method has the advantages of mild reaction conditions, safety, reliability, low cost and easiness in operation and acquisition of the additive and the catalyst for reaction, simplicity and easiness in separation of reaction products, wide substrate application range and the like. The method effectively improves reaction safety and controllability and has an extensive application prospect in preparation of medicines, material intermediates and fine chemicals.
A ligand-free, powerful, and practical method for methoxylation of unactivated aryl bromides by use of the CuCl/HCOOMe/MeONa/MeOH system
Guo, Ying,Ji, Si-Zhe,Chen, Cheng,Liu, Hong-Wei,Zhao, Jian-Hong,Zheng, Yu-Lin,Ji, Ya-Fei
, p. 8651 - 8664 (2015/03/05)
A ligand-free, powerful, and practical method for mono and polymethoxylation of unactivated aryl bromides has been developed; CuCl was used as catalyst, HCOOMe as cocatalyst, and methanolic MeONa as both nucleophile and solvent. This eco-friendly procedure is characterized by operational simplicity, inexpensive substrates (unactivated mono to polybromoarenes), full conversion, and direct recovery of pure MeOH.
Catalytic Pulsed Flow Hydrogenation Of Lignin Carboxylic Acid Compounds
-
Paragraph 0023, (2015/02/18)
Renewable resources comprising bagasse, corn stover, wood sawdust and switch grass are subject to direct catalytic conversion or bio-fermentation producing ethanol leaving complex lignin compounds for disposal. Chemical conversion of lignin compounds (recoverable from digested lignin) to substituted phenols followed by a carbon steel catalyzed pulsed flow hydrogenation produces cresol and substituted creosol compounds. The pulsed flow process produced close to 100 percent reduction of the reactants compared to 25 percent with continuous flow and is applicable to aliphatic carboxylic acid compounds such as natural oils producing valued liquid hydrocarbons. Specifically reactions are taught for carbon steel catalyzed pulsed flow hydrogenation of lignin carboxylic acids comprising 4-hydroxy-3,5-dimethoxybenzoic acid, 4,5-dihydroxy-3-methoxybenzoic acid, 4-hydroxy-3-methoxybenzoic acid, 4-hydroxybenzoic acid and substituted aliphatic carboxylic acid compounds comprising citric and oleic acids in contact with a promoter comprising an anhydrous sodium sulfate and an activator comprising Co(II)-Co(III)-Co(II) using hydrogen gas at 225° C. to 350° C. and ambient to 10 atmospheres pressure.
