6764-10-9Relevant academic research and scientific papers
An Iodide-Mediated Transition-Metal-Free Strategy towards Unsymmetrical Diaryl Sulfides via Arylhydrazines and Thiols
Asadpour, Mohammad,Azizzade, Meysam,Ghasemi, Mehran,Jafarpour, Farnaz,Rajai-Daryasarei, Saideh
supporting information, p. 727 - 734 (2020/02/25)
A mild, scalable iodine-mediated oxidative cross-coupling reaction of arylhydrazines and thiols for construction of thioethers (sulfides) in the absence of any transition metals or photocatalysts is disclosed. A variety of unsymmetrical diaryl sulfides with broad substrate scope both on thiols and hydrazines were synthesized in high yields in water at room temperature. Furthermore, to demonstrate the utility of the protocol, the above C-S bond formation was applied in the synthesis of the key structure of vortioxetine as an antidepressant drug. The gram-scale outcome also added to the potential utility of this protocol.
Homoleptic and heteroleptic Zn(ii) selone catalysts for thioetherification of aryl halides without scrubbing oxygen
Vaddamanu, Moulali,Velappan, Kavitha,Prabusankar, Ganesan
, p. 3574 - 3583 (2020/03/17)
Five new mononuclear tetra-coordinated zinc(ii) selones, [Zn(L1)2Cl2] (1), [Zn(L1)2Br2] (2), [{Zn(L2)4}{BF4}2] (3), [{Zn(L2)4}{ClO4}2] (4), and [Zn(L2)2Br2] (5), have been isolated from a one-pot reaction between the corresponding zinc(ii) salt and selone ligand, 1-methyl 3-naphthylmethylimidazoline-2-selone (L1) or 1-isopropyl 3-methylimidazoline-2-selone (L2). All these complexes were characterized by CHN analysis, FT-IR, NMR studies, and single-crystal X-ray crystallography techniques. The Zn(ii) center in 1-5 exhibits a distorted tetrahedral geometry. Besides, 1-5 were employed as catalysts in the thioetherification of aryl halides. The first zinc(ii) catalyst-mediated thioetherification of aryl halides without scrubbing oxygen was demonstrated. Catalysts 1-5 are highly active towards the cross-coupling reaction between aryl halides and thiophenols. The catalytic ability of 1-5 was explored in THF, toluene, and CH3CN solvents with different bases such as K2CO3, Cs2CO3, and NaOtBu. Interestingly, the zinc(ii) center attached to two selone ligands is much more catalytically active than that attached to four selone ligands.
Highly active mesoionic chalcogenone zinc(II) derivatives for C-S cross-coupling reactions
Vaddamanu, Moulali,Prabusankar, Ganesan,Velappan, Kavitha
, p. 129 - 140 (2019/12/26)
The first mesoionic heavier chalcogenones, L1-L3 [L1 = 1-(2-mesitylene)-3-methyl-4-phenyltriazolin-5-selone; L2 = 1-(2-mesitylene)-3-methyl-4-phenyltriazolin-5-thione; L3 = 1-(benzyl)-2-3(methyl)-4-phenyltriazolin-5-selone], were isolated and characterised. Density functional theory was used to obtain insights into the σ donor and π accepting nature of mesoionic chalcogenones. Using these new ligands, a series of the first zinc(ii) mesoionic chalcogenone complexes were isolated. Three mono nuclear zinc(ii) chalcogenone complexes, [(L1)Zn(Cl)2(HOMe)] (1), [(L2)Zn(Cl)2(HOMe)] (3) and [(L2)Zn(Br)2(HOMe)] (4), and two dinuclear zinc complexes, [(L1)Zn(Br)(μ2-Br)]2 (2) and [(L3)Zn(Br)(μ2-Br)]2 (5), containing mesoionic thione and selone ligands were synthesized and characterised. These new complexes 1-5 represent the first structurally characterized mesoionic chalcogenone supported metal derivatives. Furthermore, all zinc complexes were characterized by thermogravimetric analysis and UV-vis spectroscopy. The solid-state structures of all zinc complexes were determined by single-crystal X-ray diffraction. The catalytic activities of the zinc(ii) complexes in thioetherification reactions were investigated without scrubbing of oxygen. The scope of the catalytic reactions was explored with a wide range of thiophenols and aryl halides. The diaryl thioethers were obtained in very good yield under mild conditions. The present protocol furnishes a synthetic route for the C-S cross-coupling of thiophenols and aryl halides without scrubbing oxygen and moisture.
Anionic Bismuth(III) chloride cluster with diselenide countercations: Application in C-S cross coupling reactions
Ganesan, Prabusankar,Mannem, Adinarayana,Muthukumaran, Nirmala
supporting information, p. 29 - 35 (2019/02/08)
The first weakly coordinating anion (WCA) with reactive p-block cation (rPBC) type of [(Bi4Cl16)4-{(LSeSeL)2+}2], L = 1,3-bis(2-benzhydryl-4,6-dimethylphenyl)-1H-imidazole-2(3H), ion pair is reported. The tetranuclear anionic bismuth(III) cluster shows a new type of ladder structure with two different types of Bi(III) coordination modes. In the solid state structure, the tetranuclear bismuth(III) cluster is sandwiched by two diselenide cations through hydrogen bonding interactions. Besides, this ion pair has been efficaciously employed as catalyst in C-S cross-coupling reactions under optimized reaction condition. This ion pair depicted a wide range of substrate scope with different thiols and aryl halides.
Metal-Free Cercosporin-Photocatalyzed C-S Coupling for the Selective Synthesis of Aryl Sulfides under Mild Conditions
Li, Jia,Bao, Wenhao,Zhang, Yan,Rao, Yijian
supporting information, p. 7175 - 7178 (2019/11/16)
Aryl sulfides are important motifs of bioactive molecules, which are generally synthesized by transition metal-based coupling reactions under harsh conditions. Herein, we developed a new method that visible light along with cercosporin, produced by liquid fermentation and functioned as a cost-effective and environmentally friendly photocatalyst, prompted the selective synthesis of aryl sulfides through C–S coupling of thiols and diazonium salts under mild conditions. Furthermore, this method can also be performed with a great conversion by the direct use of cercosporin-containing fermentation supernatant as catalytic system without organic solvent extraction.
Fe-based metal-organic frameworks for the synthesis of N-arylsulfonamides via the reactions of sodium arylsulfinates or arylsulfonyl chlorides with nitroarenes in water
Li, Xinxin,Chen, Fei,Lu, Guo-Ping
supporting information, p. 4226 - 4230 (2018/10/26)
A newly developed chemoselective reaction of sodium arylsulfinates or arylsulfonyl chlorides with nitroarenes has been disclosed. The chemistry, in which non-toxic water and recyclable iron-based metal-organic frameworks are employed as the solvent and catalyst, respectively, provides an efficient approach for the generation of N-arylsulfonamides, which are widely present in biologically active compounds and drugs, rendering this methodology attractive to both synthetic and medicinal chemistry.
Primary sulfonamide as a coupling partner: Copper(I)-catalyzed regioselective cross-coupling of 2-nitro benzenesulfonamides with thiol through the cleavage of Ar–SO2NH2 bonds
Chen, Junmin,Zhang, Kuo,Zhao, Yongli,Pu, Shouzhi
, p. 1316 - 1323 (2018/04/05)
In this article, we have presented a novel and efficient method for the direct synthesis of unsymmetrical sulfides through the copper(I)-catalyzed cross-coupling of 2-nitro benzenesulfonamides with thiols in the presence of catalytic amount of CuI in DMF as solvent at 100 °C. In addition, the products were obtained in high to excellent yields. More importantly, the novel system showed the primary 2-nitro benzenesulfonamides as a new coupling partner and regioselectively promoted C–S bond-forming transformations through the cleavage of Ar–SO2NH2 bonds.
Aerobic copper-catalyzed decarboxylative thiolation
Li, Minghao,Hoover, Jessica M.
supporting information, p. 8733 - 8736 (2016/07/15)
Copper-catalyzed decarboxylative thiolation using molecular oxygen as the sole oxidant was developed. A variety of aromatic carboxylic acids including 2-nitrobenzoic acids, pentafluorobenzoic acid and several heteroaromatic carboxylic acids undergo efficient thiolation to furnish the aryl sulfides in moderate to excellent yields.
Iridium and phosphine promoted C-F bond activation: The C-S cross-coupling of aryl fluorides with diaryl disulfides to synthesize thioethers
Li, Liang,Miao, Hongyan,Ding, Yuqiang
supporting information, p. 6405 - 6408 (2015/11/16)
Carbon-fluorine bond is the strongest known single bond to carbon and proved very difficult to cleave. An iridium and phosphine promoted C-F bond activation was developed, for the first time achieving the C-S cross-coupling reaction of disulfides with aryl fluorides using iridium complex. The corresponding monoarylthiolation products were obtained at moderate to good yields. Thus, it represents a new method for the synthesis of aryl sulfides through C-F bond activation.
Ligand-free solid supported palladium(0) nano/microparticles promoted C-O, C-S, and C-N cross coupling reaction
Bandna,Guha, Nitul Ranjan,Shil, Arun K.,Sharma, Dharminder,Das, Pralay
supporting information, p. 5318 - 5322 (2012/10/30)
Ligand-free solid-supported nano and microparticles of Pd(0) (SS-Pd) were used as a heterogeneous catalyst in carbon-heteroatom bond formation reactions. Nitro substituted aryl halides reacted with oxygen, sulfur, and nitrogen nucleophiles to afford the corresponding products in good yields. A one-pot sequential cross coupling and nitro-reduction was also performed using the same SS-Pd catalyst to access amine substituted carbon-heteroatomic molecules. In addition, SS-Pd could be recycled up to seven runs without a significant loss of catalytic activity.
