7443-55-2Relevant academic research and scientific papers
HYDROXYL-DIRECTED OLEFIN HYDROGENATION WITH IRIDIUM CATALYSTS. THE DOCUMENTATION OF CATALYST : SUBSTRATE STOICHIOMETRY AS A VARIABLE IN REACTION DIASTEREOSELECTION.
Evans, David A.,Morrissey, Michael M.
, p. 4637 - 4640 (1984)
The present investigation documents the fact that hydroxyl-directed hydrogenation of cyclic and acyclic olefinic alcohols with the cationic iridium catalyst, Ir(COD)py(PCy3)PF6, exhibits reaction diastereoselectivity which is dependent upon catalyst-substrate stoichiometry.
Heterogeneous Hydroxyl-Directed Hydrogenation: Control of Diastereoselectivity through Bimetallic Surface Composition
Shumski, Alexander J.,Swann, William A.,Escorcia, Nicole J.,Li, Christina W.
, p. 6128 - 6134 (2021/05/29)
Directed hydrogenation, in which product selectivity is dictated by the binding of an ancillary directing group on the substrate to the catalyst, is typically catalyzed by homogeneous Rh and Ir complexes. No heterogeneous catalyst has been able to achieve equivalently high directivity due to a lack of control over substrate binding orientation at the catalyst surface. In this work, we demonstrate that Pd-Cu bimetallic nanoparticles with both Pd and Cu atoms distributed across the surface are capable of high conversion and diastereoselectivity in the hydroxyl-directed hydrogenation reaction of terpinen-4-ol. We postulate that the OH directing group adsorbs to the more oxophilic Cu atom while the olefin and hydrogen bind to adjacent Pd atoms, thus enabling selective delivery of hydrogen to the olefin from the same face as the directing group with a 16:1 diastereomeric ratio.
Expedient Synthesis of Bridged Bicyclic Nitrogen Scaffolds via Orthogonal Tandem Catalysis
Bheemireddy, Narendraprasad Reddy,Biswas, Sovan,Evano, Gwilherm,Maes, Bert U. W.,Van Steijvoort, Ben F.,Waeterschoot, Marjo
, p. 21988 - 21996 (2021/08/13)
Bridged nitrogen bicyclic skeletons have been accessed via unprecedented site- and diastereoselective orthogonal tandem catalysis from readily accessible reactants in a step economic manner. Directed Pd-catalyzed γ-C(sp3)-H olefination of aminocyclohexane with gem-dibromoalkenes, followed by a consecutive intramolecular Cu-catalyzed amidation of the 1-bromo-1-alkenylated product delivers the interesting normorphan skeleton. The tandem protocol can be applied on substituted aminocyclohexanes and aminoheterocycles, easily providing access to the corresponding substituted, aza- and oxa-analogues. The Cu catalyst of the Ullmann-Goldberg reaction additionally avoids off-cycle Pd catalyst scavenging by alkenylated reaction product. The picolinamide directing group stabilizes the enamine of the 7-alkylidenenormorphan, allowing further product post functionalizations. Without Cu catalyst, regio- and diastereoselective Pd-catalyzed γ-C(sp3)-H olefination is achieved.
Cobalt-Nanoparticles Catalyzed Efficient and Selective Hydrogenation of Aromatic Hydrocarbons
Murugesan, Kathiravan,Senthamarai, Thirusangumurugan,Alshammari, Ahmad S.,Altamimi, Rashid M.,Kreyenschulte, Carsten,Pohl, Marga-Martina,Lund, Henrik,Jagadeesh, Rajenahally V.,Beller, Matthias
, p. 8581 - 8591 (2019/09/12)
The development of inexpensive and practical catalysts for arene hydrogenations is key for future valorizations of this general feedstock. Here, we report the development of cobalt nanoparticles supported on silica as selective and general catalysts for such reactions. The specific nanoparticles were prepared by assembling cobalt-pyromellitic acid-piperazine coordination polymer on commercial silica and subsequent pyrolysis. Applying the optimal nanocatalyst, industrial bulk, substituted, and functionalized arenes as well as polycyclic aromatic hydrocarbons are selectively hydrogenated to obtain cyclohexane-based compounds under industrially viable and scalable conditions. The applicability of this hydrogenation methodology is presented for the storage of H2 in liquid organic hydrogen carriers.
SN2 Reaction of Diarylmethyl Anions at Secondary Alkyl and Cycloalkyl Carbons
Shinohara, Riku,Ogawa, Narihito,Kawashima, Hidehisa,Wada, Kyohei,Saito, Shun,Yamazaki, Takashi,Kobayashi, Yuichi
, p. 1461 - 1478 (2019/01/25)
The substitution reaction of the diethyl allylic and propargylic phosphates with Ar2CH anions was applied to sec-alkyl phosphates to compare reactivity and stereoselectivity. However, the substitution took place on the ethyl carbon of the diethyl phosphate group. We then found that the diphenyl phosphate leaving group ((PhO)2PO2) was suited for the substitution at the sec-alkyl carbon. Enantioenriched diphenyl sec-alkyl phosphates with different substituents (Me, Et, iPr) on the vicinal position underwent the substitution reaction with almost complete inversion (>99% enantiospecificity). The substitution reactions of cyclohexyl phosphates possessing cis or trans substituents (Me and/or tBu) at the C4, C3, and C2 positions of the cyclohexane ring were also studied to observe the difference in reactivity among the cis and trans isomers. A transition-state model with the phosphate leaving group ((PhO)2PO2) in the axial position was proposed to explain the difference. This model was supported by computational calculation of the virtual substitution reaction of the structurally simpler “dimethyl” cyclohexyl phosphates (leaving group = (MeO)2PO2) with MeLi. Furthermore, the calculation unexpectedly indicated higher propensity of (PhO)2PO2 as a leaving reactivity than alkyl phosphate groups such as (MeO)2PO2 and (iPrO)2PO2.
A Practical and Stereoselective In Situ NHC-Cobalt Catalytic System for Hydrogenation of Ketones and Aldehydes
Zhong, Rui,Wei, Zeyuan,Zhang, Wei,Liu, Shun,Liu, Qiang
supporting information, p. 1552 - 1566 (2019/06/14)
Homogeneous catalytic hydrogenation of carbonyl groups is a synthetically useful and widely applied organic transformation. Sustainable chemistry goals require replacing conventional noble transition metal catalysts for hydrogenation by earth-abundant base metals. Herein, we report how a practical in situ catalytic system generated by easily available pincer NHC precursors, CoCl2, and a base enabled efficient and high-yielding hydrogenation of a broad range of ketones and aldehydes (over 50 examples and a maximum turnover number [TON] of 2,610). This is the first example of NHC-Co-catalyzed hydrogenation of C=O bonds using flexible pincer NHC ligands consisting of a N-H substructure. Diastereodivergent hydrogenation of substituted cyclohexanone derivatives was also realized by fine-tuning of the steric bulk of pincer NHC ligands. Additionally, a bis(NHCs)-Co complex was successfully isolated and fully characterized, and it exhibits excellent catalytic activity that equals that of the in-situ-formed catalytic system. Catalytic hydrogenation is a powerful tool for the reduction of organic compounds in both fine and bulk chemical industries. To improve sustainability, more ecofriendly, inexpensive, and earth-abundant base metals should be employed to replace the precious metals that currently dominate the development of hydrogenation catalysts. However, the majority of the base-metal catalysts that have been reported involve expensive, complex, and often air- and moisture-sensitive phosphine ligands, impeding their widespread application. From a mixture of the stable CoCl2, imidazole salts, and a base, our newly developed catalytic system that formed easily in situ enables efficient and stereoselective hydrogenation of C=O bonds. We anticipate that this easily accessible catalytic system will create opportunities for the design of practical base-metal hydrogenation catalysts. A practical in situ catalytic system generated by a mixture of easily available pincer NHC precursors, CoCl2, and a base enabled highly efficient hydrogenation of a broad range of ketones and aldehydes (over 50 examples and up to a turnover number [TON] of 2,610). Diastereodivergent hydrogenation of substituted cyclohexanone derivatives was also realized in high selectivities. Moreover, the preparation of a well-defined bis(NHCs)-Co complex via this pincer NHC ligand consisting of a N-H substructure was successful, and it exhibits equally excellent catalytic activity for the hydrogenation of C=O bonds.
Epimerization of Tertiary Carbon Centers via Reversible Radical Cleavage of Unactivated C(sp3)-H Bonds
Wang, Yaxin,Hu, Xiafei,Morales-Rivera, Cristian A.,Li, Guo-Xing,Huang, Xin,He, Gang,Liu, Peng,Chen, Gong
supporting information, p. 9678 - 9684 (2018/07/21)
Reversible cleavage of C(sp3)-H bonds can enable racemization or epimerization, offering a valuable tool to edit the stereochemistry of organic compounds. While epimerization reactions operating via cleavage of acidic C(sp3)-H bonds, such as the Cα-H of carbonyl compounds, have been widely used in organic synthesis and enzyme-catalyzed biosynthesis, epimerization of tertiary carbons bearing a nonacidic C(sp3)-H bond is much more challenging with few practical methods available. Herein, we report the first synthetically useful protocol for the epimerization of tertiary carbons via reversible radical cleavage of unactivated C(sp3)-H bonds with hypervalent iodine reagent benziodoxole azide and H2O under mild conditions. These reactions exhibit excellent reactivity and selectivity for unactivated 3° C-H bonds of various cycloalkanes and offer a powerful strategy for editing the stereochemical configurations of carbon scaffolds intractable to conventional methods. Mechanistic study suggests that the unique ability of N3? to serve as a catalytic H atom shuttle is critical to reversibly break and reform 3° C-H bonds with high efficiency and selectivity.
Mild and Regioselective Hydroxylation of Methyl Group in Neocuproine: Approach to an N,O-Ligated Cu6 Cage Phenylsilsesquioxane
Bilyachenko, Alexey N.,Levitsky, Mikhail M.,Khrustalev, Victor N.,Zubavichus, Yan V.,Shul'Pina, Lidia S.,Shubina, Elena S.,Shul'Pin, Georgiy B.
supporting information, p. 168 - 171 (2018/02/06)
The self-Assembly synthesis of Cu(II)-silsesquioxane involving 2,9-dimethyl-1,10-phenanthroline (neocuproine) as an additional N ligand at copper atoms was performed. The reaction revealed an unprecedented aerobic hydroxylation of only one of the two methyl groups in neocuproine to afford the corresponding geminal diol. The produced derivative of oxidized neocuproine acts as a two-centered N,O ligand in the assembly of the hexacopper cage product [Cu6(Ph5Si5O10)2·(C14H11N2O2)2] (1), coordinating two of the six copper centers in the product. Two siloxanolate ligands [PhSi(O)O]5 in the cis configuration coordinate to the rest of the copper(II) ions. Compound 1 is a highly efficient homogeneous precatalyst in the oxidation of alkanes and alcohols with peroxides.
Heptanuclear Fe5Cu2-Phenylgermsesquioxane containing 2,2′-Bipyridine: Synthesis, Structure, and Catalytic Activity in Oxidation of C-H Compounds
Bilyachenko, Alexey N.,Khrustalev, Victor N.,Zubavichus, Yan V.,Shul'Pina, Lidia S.,Kulakova, Alena N.,Bantreil, Xavier,Lamaty, Frédéric,Levitsky, Mikhail M.,Gutsul, Evgeniy I.,Shubina, Elena S.,Shul'Pin, Georgiy B.
, p. 528 - 534 (2018/01/11)
A new representative of an unusual family of metallagermaniumsesquioxanes, namely the heterometallic cagelike phenylgermsesquioxane (PhGeO2)12Cu2Fe5(O)OH(PhGe)2O5(bipy)2 (2), was synthesized and structurally characterized. Fe(III) ions of the complex are coordinated by oxa ligands: (i) cyclic (PhGeO2)12 and acyclic (Ph2Ge2O5) germoxanolates and (ii) O2- and (iii) HO- moieties. In turn, Cu(II) ions are coordinated by both oxa (germoxanolates) and aza ligands (2,2′-bipyridines). This "hetero-type" of ligation gives in sum an attractive pagoda-like molecular architecture of the complex 2. Product 2 showed a high catalytic activity in the oxidation of alkanes to the corresponding alkyl hydroperoxides (in yields up to 30%) and alcohols (in yields up to 100%) and in the oxidative formation of benzamides from alcohols (catalyst loading down to 0.4 mol % in Cu/Fe).
Chemo-Enzymatic Oxidative Rearrangement of Tertiary Allylic Alcohols: Synthetic Application and Integration into a Cascade Process
Brenna, Elisabetta,Crotti, Michele,De Pieri, Matteo,Gatti, Francesco G.,Manenti, Gabriele,Monti, Daniela
, p. 3677 - 3686 (2018/06/04)
A chemo-enzymatic catalytic system, comprised of Bobbitt's salt and laccase from Trametes versicolor, allowed the [1,3]-oxidative rearrangement of endocyclic allylic tertiary alcohols into the corresponding enones under an Oxygen atmosphere in aqueous media. The yields were in most cases quantitative, especially for the cyclopent-2-en-1-ol or the cyclohex-2-en-1-ol substrates without an electron withdrawing group (EWG) on the side chain. Transpositions of macrocyclic alkenols or tertiary alcohols bearing an EWG on the side chain were instead carried out in acetonitrile by using an immobilized laccase preparation. Dehydro-Jasmone, dehydro-Hedione, dehydro-Muscone and other fragrance precursors were directly prepared with this procedure, while a synthetic route was developed to easily transform a cyclopentenone derivative into trans-Magnolione and dehydro-Magnolione. The rearrangement of exocyclic allylic alcohols was tested as well, and a dynamic kinetic resolution was observed: α,β-unsaturated ketones with (E)-configuration and a high diastereomeric excess were synthesized. Finally, the 2,2,6,6-tetramethyl-1-piperidinium tetrafluoroborate (TEMPO+BF4?)/laccase catalysed oxidative rearrangement was combined with the ene-reductase/alcohol dehydrogenase cascade process in a one-pot three-step synthesis of cis or trans 3-methylcyclohexan-1-ol, in both cases with a high optical purity. (Figure presented.).
