Welcome to LookChem.com Sign In|Join Free

CAS

  • or
5-METHYL-1-PHENYL-3-HEXANONE is a chemical with a specific purpose. Lookchem provides you with multiple data and supplier information of this chemical.

78987-82-3

Post Buying Request

78987-82-3 Suppliers

Recommended suppliersmore

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

78987-82-3 Usage

Synthesis Reference(s)

Journal of the American Chemical Society, 95, p. 4763, 1973 DOI: 10.1021/ja00795a055Tetrahedron Letters, 23, p. 5059, 1982 DOI: 10.1016/S0040-4039(00)85572-0

Check Digit Verification of cas no

The CAS Registry Mumber 78987-82-3 includes 8 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 5 digits, 7,8,9,8 and 7 respectively; the second part has 2 digits, 8 and 2 respectively.
Calculate Digit Verification of CAS Registry Number 78987-82:
(7*7)+(6*8)+(5*9)+(4*8)+(3*7)+(2*8)+(1*2)=213
213 % 10 = 3
So 78987-82-3 is a valid CAS Registry Number.
InChI:InChI=1/C13H18O/c1-11(2)10-13(14)9-8-12-6-4-3-5-7-12/h3-7,11H,8-10H2,1-2H3

78987-82-3SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 15, 2017

Revision Date: Aug 15, 2017

1.Identification

1.1 GHS Product identifier

Product name 5-methyl-1-phenylhexan-3-one

1.2 Other means of identification

Product number -
Other names 5-Methyl-1-phenyl-hexan-3-on

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:78987-82-3 SDS

78987-82-3Relevant articles and documents

C-C coupling formation using nitron complexes

Sevim, Mehmet,Kavukcu, Serdar Batikan,Kinal, Arma?an,?ahin, Onur,Türkmen, Hayati

supporting information, p. 16903 - 16915 (2020/12/18)

A series of RuII (1), RhIII (2), IrIII (3, 4), IrI (5) and PdII (6-9) complexes of the 'instant carbene' nitron were prepared and characterized by 1H- and 13C-NMR, FT-IR and elemental analysis. The molecular structures of complexes 1-4 and 6 were determined by X-ray diffraction studies. The catalytic activity of the complexes (1-9) was evaluated in alpha(α)-alkylation reactions of ketones with alcohol via the borrowing hydrogen strategy under mild conditions. These complexes were able to perform this catalytic transformation in a short time with low catalyst and base amounts under an air atmosphere. Also, the PdII-nitron complexes (6-9) were applied in the Suzuki-Miyaura C-C coupling reaction and these complexes successfully initiated this reaction in a short time (30 minutes) using the H2O/2-propanol (1.5?:?0.5) solvent system. The DFT calculations revealed that the Pd0/II/0 pathway was more preferable for the mechanism

Synthesis and catalytic applications of Ru and Ir complexes containing N,O-chelating ligand

Pakyapan, Bilge,Kavukcu, Serdar Bat?kan,?ahin, Zarife Sibel,Türkmen, Hayati

, (2020/09/01)

A series of monometallic complexes (Ru1–3, Ir1–3) which have N,O-chelating ligand (pyrazine-2-carboxylate (1), pyridine-2-carboxylate (2), quinoline carboxylate(3) and bimetallic complexes (Ru4,5, Ir4,5) bridged by pyrazine-2,3- dicarboxylate (4) and imidazole-4,5-dicarboxylate(5) were synthesized and characterized by 1H-, 13C NMR, FT-IR, and elemental analysis. The crystal structure of Ir2 was determined by X-ray crystallography. The complexes (Ru1–5, Ir1–5) were applied to investigate the electronic and steric effect of ligand in their catalytic activities in transfer hydrogenation and alpha(α)-alkylation reaction of ketones with alcohols. The activities of iridium complexes (Ir1–5) were much more efficient than ruthenium complexes (Ru1–5). The highest activity for both reactions was observed for the complex (Ir2) with pyridine-2-carboxylate. The Ir hydride species was monitored for both reactions.

Piano-stool Ru (II) arene complexes that contain ethylenediamine and application in alpha-alkylation reaction of ketones with alcohols

Kavukcu, Serdar Bat?kan,Günnaz, Salih,?ahin, Onur,Türkmen, Hayati

, (2019/03/21)

A series of piano-stool Ru (II) complexes (Ru1–7) bearing ethylenediamine with aryl and aliphatic groups were prepared and fully characterized by 1H, 13C, 19F and 31P NMR spectroscopy, FT-IR and elemental analysis. The crystal structures of Ru2–4 and Ru7 were determined by X-ray crystallography. They were successfully applied to the alpha(α)-alkylation of aliphatic and aromatic ketones with alcohols via the borrowing hydrogen strategy in mild reaction conditions within a short time. The catalytic system has a broad substrate scope, which allows the synthesis of alpha alkylated ketones with excellent yields. The electronic and steric effects of complexes on catalytic activity were analysed. The influence of the carbon chain length of the ligand on the alpha-alkylation reaction of ketones was also investigated. The catalytic cycle was also examined by 1H-NMR spectroscopy in d8-toluene.

Solvent-free direct α-alkylation of ketones by alcohols catalyzed by nickel supported on silica-alumina

Charvieux, Aubin,Giorgi, Javier B.,Duguet, Nicolas,Métay, Estelle

supporting information, p. 4210 - 4216 (2018/10/02)

The α-alkylation of acetophenone with benzyl alcohol through borrowing hydrogen has been studied using nickel catalysis. Ni/SiO2-Al2O3 was found to be the best catalyst for this transformation and the corresponding alkylated acetophenone was obtained with 93% isolated yield. Following the objectives of clean and sustainable chemistry, the reaction occurs under solvent-free conditions and requires only a catalytic amount of base. This protocol was next applied to a wide range of ketones and alcohols and the desired products were isolated with 18-86% yields (26 examples). The recovery and recyclability of the nickel catalyst was also investigated and it was found to be active over 5 runs without significant loss of activity. Surprisingly, the active catalyst appears to include an amorphous nickel hydroxide layer.

NNN pincer Ru(II)-complex-catalyzed α-alkylation of ketones with alcohols

Cao, Xiao-Niu,Wan, Xiao-Min,Yang, Fa-Liu,Li, Ke,Hao, Xin-Qi,Shao, Tian,Zhu, Xinju,Song, Mao-Ping

, p. 3657 - 3668 (2018/04/14)

A series of novel ruthenium(II) complexes supported by a symmetrical NNN ligand were prepared and fully characterized. These complexes exhibited good performance in transfer hydrogenation to form new C-C bonds using alcohols as the alkylating agents, generating water as the only byproduct. A broad range of substrates, including (hetero)aryl- or alkyl-ketones and alcohols, were well tolerated under the optimized conditions. Notably, α-substituted methylene ketones were also investigated, which afforded α-branched steric hindrance products. A potential application of α-alkylation of methylene acetone to synthesize donepezil was demonstrated, which provided the desired product in 83% yield. Finally, this catalytic system could be applied to a one-pot double alkylation procedure with sequential addition of two different alcohols. The current protocol is featured with several characteristics, including a broad substrate scope, low catalyst (0.50 mol %) loadings, and environmental benignity.

Catalytic Radical Trifluoromethylalkynylation of Unactivated Alkenes

Zhou, Shaofang,Song, Tao,Chen, He,Liu, Zhonglin,Shen, Haigen,Li, Chaozhong

supporting information, p. 698 - 701 (2017/02/10)

The trifluoromethylalkynylation of unactivated alkenes with alkynyl sulfones and Togni's reagent was developed. The reaction was catalyzed by 2,4,6-trimethylpyridine, leading to various β-trifluoromethylated alkynes under metal-free conditions with a broad substrate scope and wide functional group compatibility. A mechanism involving catalytic nonchain radical processes is proposed.

Palladium-catalyzed enolate arylation as a key C-C bond-forming reaction for the synthesis of isoquinolines

Pilgrim, Ben S.,Gatland, Alice E.,Esteves, Carlos H. A.,McTernan, Charlie T.,Jones, Geraint R.,Tatton, Matthew R.,Procopiou, Panayiotis A.,Donohoe, Timothy J.

, p. 1065 - 1090 (2016/01/15)

The palladium-catalyzed coupling of an enolate with an ortho-functionalized aryl halide (an α-arylation) furnishes a protected 1,5-dicarbonyl moiety that can be cyclized to an isoquinoline with a source of ammonia. This fully regioselective synthetic route tolerates a wide range of substituents, including those that give rise to the traditionally difficult to access electron-deficient isoquinoline skeletons. These two synthetic operations can be combined to give a three-component, one-pot isoquinoline synthesis. Alternatively, cyclization of the intermediates with hydroxylamine hydrochloride engenders direct access to isoquinoline N-oxides; and cyclization with methylamine, gives isoquinolinium salts. Significant diversity is available in the substituents at the C4 position in four-component, one-pot couplings, by either trapping the in situ intermediate after α-arylation with carbon or heteroatom-based electrophiles, or by performing an α,α-heterodiarylation to install aryl groups at this position. The α-arylation of nitrile and ester enolates gives access to 3-amino and 3-hydroxyisoquinolines and the α-arylation of tert-butyl cyanoacetate followed by electrophile trapping, decarboxylation and cyclization, C4-functionalized 3-aminoisoquinolines. An oxime directing group can be used to direct a C-H functionalization/bromination, which allows monofunctionalized rather than difunctionalized aryl precursors to be brought through this synthetic route.

A new synthetic method for methyl ketones from carboxylic acids using metallic strontium and methyl iodide

Miyoshi, Norikazu,Matsuo, Tsuyoshi,Asaoka, Masashi,Matsui, Aki,Wada, Makoto

, p. 28 - 29 (2007/10/03)

Carboxylic acids reacted with metallic strontium and methyl iodide to give methyl ketones preferentially in moderate to good yields. Copyright

REDUCTION OF BENZYLIDENEACETONE DERIVATIVES WITH Pd/SiO2-AlPO4 AS CATALYST AND CYCLOHEXENE AS HYDROGEN DONOR

Alba, A.,Aramendia, A.,Borau, V.,Garcia-Raso, A.,Jimenez, C.,Marinas, J. M.

, p. 917 - 921 (2007/10/02)

The hydrogen transfer reduction of benzylidenacetone derivatives p-X-C6H4-CH=CH-CO-R (X=-OCH3, H; R=C6H5, alkyl, OR, OH) using cyclohexene as hydrogen donor has been studied.The selective reduction of the C=C bond is observed and the effects of the nature of X and R, solvent, catalyst, and reaction temperature on the initial reaction rate are analyzed.In all cases, and for any substrate or catalyst, the reaction is firts-order with respect to the hydrogen donor and acceptor.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 78987-82-3