79128-75-9Relevant academic research and scientific papers
Visible-Light-Promoted Iron-Catalyzed N-Arylation of Dioxazolones with Arylboronic Acids
Tang, Jing-Jing,Yu, Xiaoqiang,Yamamoto, Yoshinori,Bao, Ming
, p. 13955 - 13961 (2021/11/20)
A visible-light-promoted and simple iron salt-catalyzed N-arylation was achieved efficiently under external photosensitizer-free conditions. Arylboronic acids and bench-stable dioxazolones were used for this cross-coupling reaction. This reaction features high reactivity, wide substrate scope, good functional group tolerance, simple operation procedure, and mild reaction conditions. Preliminary mechanistic investigations were conducted to support a radical pathway. This method may contribute to shift the paradigm of iron-catalyzed C-N bond construction and nitrene transfer chemistry.
Switching from biaryl formation to amidation with convoluted polymeric nickel catalysis
Sen, Abhijit,Dhital, Raghu N.,Sato, Takuma,Ohno, Aya,Yamada, Yoichi M.A.
, p. 14410 - 14418 (2020/12/21)
A stable, reusable, and insoluble poly(4-vinyl-pyridine) nickel catalyst (P4VP-NiCl2) was prepared through the molecular convolution of poly(4-vinylpyridine) (P4VP) and nickel chloride. We proposed a coordination structure of the Ni center in the precatalyst based on elemental analysis and Ni K-edge XANES, and we confirmed that it is consistent with Ni K-edge EXAFS. The Suzuki?Miyaura-type coupling of aryl halides and arylboronic esters proceeded using P4VP-NiCl2 (0.1 mol % Ni) to give the corresponding biaryl compounds in up to 94% yield. Surprisingly, when the same reaction of aryl halides and arylboronic acid/ester was carried out in the presence of amides, the amidation proceeded predominantly to give the corresponding arylamides in up to 99% yield. In contrast, the reaction of aryl halides and amides in the absence of arylboronic acid/ester did not proceed. P4VP-NiCl2 successfully catalyzed the lactamization for preparing phenanthridinone. P4VP-NiCl2 was reused five times without significant loss of catalytic activity. Pharmaceuticals, natural products, and biologically active compounds were synthesized efficiently using P4VPNiCl2 catalysis. Nickel contamination in the prepared pharmaceutical compounds was not detected by ICP-MS analysis. The reaction was scaled to multigrams without any loss of chemical yield. Mechanistic studies for both Suzuki?Miyaura and amidation were performed.
Amidation of Aryl Chlorides Using a Microwave-Assisted, Copper-Catalyzed Concurrent Tandem Catalytic Methodology
Chang, Raymond K.,Clairmont, Brice P.,Lin, Shirley,MacArthur, Amy H. Roy
supporting information, p. 4448 - 4454 (2019/11/13)
A concurrent tandem catalytic (CTC) methodology has been developed for the amidation of aryl chlorides where the aryl chloride is first converted to an aryl iodide via halogen exchange and the aryl iodide is subsequently transformed into the aryl amide. A variety of aryl chlorides were converted to aryl amides in up to 85% isolated yield using 20 mol % CuI, 60 mol % N,N′-cyclohexane-1,2-diamine, 2.2 equiv of K2CO3, and 1.05-1.5 equiv of amide in acetonitrile at 200 °C after 0.75-1 h. The same copper/ligand system served as multifunctional catalyst for both steps of the concurrent catalytic process with iodide present in substoichiometric amounts. Mechanistic studies were consistent with CTC amidation occurring via a nonradical mechanism. Kinetic modeling was conducted to investigate the effect of competitive direct amidation of an aryl chloride or aryl bromide on the formation of product over time during a CTC amidation reaction.
Triflic anhydride mediated synthesis of 3,4-dihydroquinazolines: A three-component one-pot tandem procedure
Magyar, Christina L.,Wall, Tyler J.,Davies, Steven B.,Campbell, Molly V.,Barna, Haven A.,Smith, Sydney R.,Savich, Christopher J.,Mosey, R. Adam
supporting information, p. 7995 - 8000 (2019/09/06)
A one-pot three-component tandem reaction involving a key Pictet-Spengler-like annulation step has been developed, providing an efficient method for the synthesis of 3,4-dihydroquinazolines in moderate to good yields from amides, aldehydes, and amines. The multicomponent triflic anhydride mediated reaction tolerates the installation of numerous functional groups, affording extensive diversity about the heterocyclic scaffold.
Copper-Catalyzed Coupling Reaction of (Hetero)Aryl Chlorides and Amides
De, Subhadip,Yin, Junli,Ma, Dawei
supporting information, p. 4864 - 4867 (2017/09/23)
Cu2O/N,N′-bis(thiophen-2-ylmethyl)oxalamide is established to be an effective catalyst system for Goldberg amidation with inferior reactive (hetero)aryl chlorides, which have not been efficiently documented by Cu-catalysis to date. The reaction is well liberalized toward a variety of functionalized (hetero)aryl chlorides and a wide range of aromatic and aliphatic primary amides in good to excellent yields. Furthermore, the arylation of lactams and oxazolidinones is achieved. The present catalytic system also accomplished an intramolecular cross-coupling product.
Rhodium-catalyzed electrophilic amination of arylboronic acids with secondary hydroxylamines
Yasuhisa, Tomohiro,Hirano, Koji,Miura, Masahiro
supporting information, p. 463 - 465 (2017/04/03)
A rhodium(III)-catalyzed electrophilic amination of arylboronic acids with secondary hydroxylamines has been developed. The rhodium catalysis is compatible with heteroarylboronic acids as well as acyl and alkoxycarbonyl protecting groups on the nitrogen of O-acylhydroxylamines, and the corresponding secondary anilines are obtained in good to excellent yields.
Efficient and Mild Ullmann-Type N-Arylation of Amides, Carbamates, and Azoles in Water
Bollenbach, Maud,Aquino, Pedro G. V.,de Araújo-Júnior, Jo?o Xavier,Bourguignon, Jean-Jacques,Bihel, Frédéric,Salomé, Christophe,Wagner, Patrick,Schmitt, Martine
supporting information, p. 13676 - 13683 (2017/10/10)
A simple, sustainable, efficient, mild, and low-cost protocol was developed for d-glucose-assisted Cu-catalyzed Ullmann reactions in water for amides, carbamates, and nitrogen-containing heterocycles. The reaction was compatible with diverse aryl/heteroaryl iodides, giving highly substituted pyridine, indole, or indazole rings. This method offers an attractive alternative to existing protocols, because the reaction proceeds in aqueous media, occurs at or near ambient temperature, and provides the N-arylated products in good to high yields.
Nanoparticle mediated organic synthesis (NAMO-synthesis): CuI-NP catalyzed ligand free amidation of aryl halides
Kumar, Atul,Bishnoi, Ajay Kumar
, p. 41631 - 41635 (2014/12/10)
The first CuI-nanoparticle catalyzed ligand free synthesis of N-aryl amides from aryl halides and arylamides/cyclic amides has been developed. This methodology is further extended for the synthesis of nitrogen heterocycles such as benzimidazole, and quinazolinone via intermolecular amidation reaction followed by cyclization. TEM images of the CuI-NP catalyst showed spherical, well-dispersed particles which provide large surface area for reactivity and have good recyclability. This journal is
Nanoparticle mediated organic synthesis (NAMO-synthesis): CuI-NP catalyzed ligand free amidation of aryl halides
Kumar, Atul,Bishnoi, Ajay Kumar
, p. 41631 - 41635 (2015/05/20)
The first CuI-nanoparticle catalyzed ligand free synthesis of N-aryl amides from aryl halides and arylamides/cyclic amides has been developed. This methodology is further extended for the synthesis of nitrogen heterocycles such as benzimidazole, and quinazolinone via intermolecular amidation reaction followed by cyclization. TEM images of the CuI-NP catalyst showed spherical, well-dispersed particles which provide large surface area for reactivity and have good recyclability. This journal is
Copper-catalyzed formation of carbon-heteroatom and carbon-carbon bonds
-
, (2015/03/06)
The present invention relates to copper-catalyzed carbon-heteroatom and carbon-carbon bond-forming methods. In certain embodiments, the present invention relates to copper-catalyzed methods of forming a carbon-nitrogen bond between the nitrogen atom of an amide or amine moiety and the activated carbon of an aryl, heteroaryl, or vinyl halide or sulfonate. In additional embodiments, the present invention relates to copper-catalyzed methods of forming a carbon-nitrogen bond between a nitrogen atom of an acyl hydrazine and the activated carbon of an aryl, heteroaryl, or vinyl halide or sulfonate. In other embodiments, the present invention relates to copper-catalyzed methods of forming a carbon-nitrogen bond between the nitrogen atom of a nitrogen-containing heteroaromatic, e.g., indole, pyrazole, and indazole, and the activated carbon of an aryl, heteroaryl, or vinyl halide or sulfonate. In certain embodiments, the present invention relates to copper-catalyzed methods of forming a carbon-oxygen bond between the oxygen atom of an alcohol and the activated carbon of an aryl, heteroaryl, or vinyl halide or sulfonate. The present invention also relates to copper-catalyzed methods of forming a carbon-carbon bond between a reactant comprising a nucleophilic carbon atom, e.g., an enolate or malonate anion, and the activated carbon of an aryl, heteroaryl, or vinyl halide or sulfonate. Importantly, all the methods of the present invention are relatively inexpensive to practice due to the low cost of the copper comprised by the catalysts.
