83444-25-1

Upstream product

• 459-57-4 4-fluorobenzaldehyde 
• 62-53-3 aniline 
• 102904-34-7 (E)-N-(4-fluorobenzylidene)aniline 
• 824-98-6 m-methoxybenzyl chloride 
• 103-70-8 Formanilid 
• 78358-11-9 methanesulfonic acid 3-methoxy-benzyl ester 
• 132993-23-8 4-fluorophenyl trifluoromethanesulfonate 
• 103-01-5 N-Phenylglycine 
• 366-63-2 4-fluoro-N-phenylbenzamide 
• 98-80-6 phenylboronic acid 
• 459-23-4 4-fluorobenzaldoxime 
• 5676-81-3 4-fluorobenzalaniline 
• 403-33-8 methyl 4-flurobenzoate 
• 140-75-0 para-fluorobenzylamine 

Downstream Products

• 1240273-10-2 N-allyl-N-(4-fluorobenzyl)aniline 
• 124573-71-3 2-(4-fluorophenyl)-2-(phenylamino) acetonitrile 

Relevant academic research and scientific papers

MIL-101(Cr) as a synergistic catalyst for the reduction of imines with trichlorosilane

The development of catalyst based on porous crystalline materials (PCM) constructed from metal ions or clusters and multidentate organic ligands is a topic of great interest. In view of the Lewis acidic and basic properties of PCMs, we report for the first time that MIL-101(Cr) works as a synergistic catalyst for the reduction of imines with trichlorosilane as the hydrogen source. Both ketimines and aldimines were tolerated with this protocol, giving the corresponding amines in moderate to high yields. The operational simplicity as well as mild reaction conditions renders this protocol an attractive approach for the synthesis of amines. Furthermore, a chiral MOF, CMIL-101, was also realized by grafting chiral N-formyl proline derivatives to the open metal sites. Moreover, CMIL-101 exhibited a comparable catalytic performance with its homogeneous counterpart in terms of yields and enantioselectivities.

Reductive Alkylation of Azides and Nitroarenes with Alcohols: A Selective Route to Mono- And Dialkylated Amines

Herein, we demonstrated an efficient protocol for reductive alkylation of azides/nitro compounds via a borrowing hydrogen (BH) method. By following this protocol, selective mono- and dialkylated amines were obtained under mild and solvent-free conditions. A series of control experiments and deuterium-labeling experiments were performed to understand this catalytic process. Mechanistic studies suggested that the Ir(III)-H was the active intermediate in this reaction. KIE study revealed that the breaking of the C-H bond of alcohol might be the rate-limiting step. Notably, this solvent-free strategy disclosed a high TON of around 5600. Based on kinetic studies and control experiments, a metal-ligand cooperative mechanism was proposed.

Reusable Co-nanoparticles for general and selectiveN-alkylation of amines and ammonia with alcohols

A general cobalt-catalyzedN-alkylation of amines with alcohols by borrowing hydrogen methodology to prepare different kinds of amines is reported. The optimal catalyst for this transformation is prepared by pyrolysis of a specific templated material, which is generatedin situby mixing cobalt salts, nitrogen ligands and colloidal silica, and subsequent removal of silica. Applying this novel Co-nanoparticle-based material, >100 primary, secondary, and tertiary amines includingN-methylamines and selected drug molecules were conveniently prepared starting from inexpensive and easily accessible alcohols and amines or ammonia.

Iron-catalysed hydroboration of non-activated imines and nitriles: Kinetic and mechanistic studies

Iron-catalysed hydroboration of imines and nitriles has been developed under low catalyst loading (1 mol%) in the presence of HBpin. A wide scope of substrate was found to smoothly undergo hydroboration, including electron releasing/withdrawing and haloge

BF3·Et2O as a metal-free catalyst for direct reductive amination of aldehydes with amines using formic acid as a reductant

A versatile metal- and base-free direct reductive amination of aldehydes with amines using formic acid as a reductant under the catalysis of inexpensive BF3·Et2O has been developed. A wide range of primary and secondary amines and diversely substituted aldehydes are compatible with this transformation, allowing facile access to various secondary and tertiary amines in high yields with wide functional group tolerance. Moreover, the method is convenient for the late-stage functionalization of bioactive compounds and preparation of commercialized drug molecules and biologically relevant N-heterocycles. The procedure has the advantages of simple operation and workup and easy scale-up, and does not require dry conditions, an inert atmosphere or a water scavenger. Mechanistic studies reveal the involvement of imine activation by BF3and hydride transfer from formic acid.

Continuous flow heterogeneous catalytic reductive aminations under aqueous micellar conditions enabled by an oscillatory plug flow reactor

Despite the fact that continuous flow processing exhibits well-established technical advances, aqueous micellar chemistry, a field that has proven extremely useful in shifting organic synthesis to sustainable water-based media, has mostly been explored under conventional batch-based conditions. This is particularly because of the fact that the reliable handling of slurries and suspensions in flow has been considered as a significant technical challenge. Herein, we demonstrate that the strategic application of an oscillatory plug flow reactor enables heterogeneous catalytic reductive aminations in aqueous micellar media enhancing mass transport and facilitating process simplicity, stability and scalability. The micellar flow process enabled a broad range of substrates, including amino acid derivatives, to be successfully transformed under reasonably mild conditions utilizing only very low amounts of Pd/C as a readily available heterogeneous catalyst. The preparative capabilities of the process along with the recyclability of the heterogenous catalyst and the aqueous reaction media were also demonstrated. This journal is

Effect of the ancillary ligand in N-heterocyclic carbene iridium(III) catalyzed N-alkylation of amines with alcohols

A series of air-stable N-heterocyclic carbene (NHC) Ir(III) complexes (Ir1-6), bearing various combinations of chlorine, pyridine and NHC ligands, were assayed for the N-alkylation of amines with alcohols. It was found that Ir3, with two monodentate 1,3-bis-methyl-imidazolylidene (IMe) ligands, emerged as the most active complex. A large variety of amines and primary alcohols were efficiently converted into mono-N-alkylated amines in 53–96% yields. As a special highlight, for the challenging MeOH, selective N-monomethylation could be achieved using KOH as a base under an air atmosphere. Moreover, this catalytic system was successfully applied to the gram-scale synthesis of some valuable compounds.

The synthesis and structure of an amazing and stable carbonized material Cu-PC@OFM and its catalytic applications in water with mechanism explorations

An amazing and stable carbonized octahedral frame material Cu-PC@OFM was synthesized and characterized through HRTEM, SEM, XRD, XPS, and Raman spectroscopy and nitrogen adsorption/desorption analysis. In particular, the carbon matrix carrier loaded with nano-copper not only maintains the original structure, but also the nano copper particles generatedin situsignificantly improve the catalytic performance and stability. It was disclosed that the copper-based catalyst material Cu-PC@OFM showed high catalytic activity in the borrowing hydrogen reaction and the synthesis of 1-benzyl-2-aryl-1H-benzo[d]imidazole derivatives with high yields in water. This copper catalytic system provided a much greener and efficient catalyst for the synthesis of functionalized amines and 1-benzyl-2-aryl-1H-benzo[d]imidazoles with good recovery performance in water, which was the first example for the Cu-PC@OFM material-catalyzed synthesis of 1-benzyl-2-aryl-1H-benzo[d]imidazoles. In addition, a plausible reaction mechanism was proposed through some condition control experiments, deuterium labeling experiments and separation of intermediates experiments.

Mimicking transition metals in borrowing hydrogen from alcohols

Borrowing hydrogen from alcohols, storing it on a catalyst and subsequent transfer of the hydrogen from the catalyst to anin situgenerated imine is the hallmark of a transition metal mediated catalyticN-alkylation of amines. However, such a borrowing hydrogen mechanism with a transition metal free catalytic system which stores hydrogen molecules in the catalyst backbone is yet to be established. Herein, we demonstrate that a phenalenyl ligand can imitate the role of transition metals in storing and transferring hydrogen molecules leading to borrowing hydrogen mediated alkylation of anilines by alcohols including a wide range of substrate scope. A close inspection of the mechanistic pathway by characterizing several intermediates through various spectroscopic techniques, deuterium labelling experiments, and DFT study concluded that the phenalenyl radical based backbone sequentially adds H+, H˙ and an electron through a dearomatization process which are subsequently used as reducing equivalents to the C-N double bond in a catalytic fashion.

Cooperative catalysis of molybdenum with organocatalysts for distribution of products between amines and imines

Multi-amino groups and nitrogen donors compound was discovered as an organocatalyst for N-alkylation of alcohols with amines in the presence of Mo(CO)6. The Mo(CO)6/organocatalyst binary system has shown to be a highly active catalyst for the N-alkylation reaction between alcohols and amines with excellent tolerance of variable starting materials bearing different functional groups. Of particular note, this method possessing a superiority selectivity in the synthesis of N-alkylated amines or imines, which can be controlled by the reaction temperature. The cooperative catalysis mechanism in combination of Mo(CO)6 with organocatalyst was elucidated by control experiments.