920281-53-4Relevant academic research and scientific papers
Selective ethylene trimerization: A study into the mechanism and the reduction of PE formation
Hagen, Henk,Kretschmer, Winfried P.,Van Buren, Frederik R.,Hessen, Bart,Van Oeffelen, Dominicus A.
, p. 237 - 247 (2006)
In the present study, the titanium-catalyzed ethylene trimerization in general, and more specifically, the concomitant PE formation have been studied. The polymer formation is undesirable as it not only will lead to lower 1-hexene yields, but it can cause reactor fouling under the applied conditions (30-80 °C, toluene solvent). It is, therefore, important to know which factors are involved in the formation of polymeric products and how their formation can be reduced or even prevented. The PE formation turns out to be catalyzed by at least two different species. A significant amount of PE is formed in the early stages of the reaction, caused by the presence of partly alkylated titanium species. The PE formation during later stages of the reaction is due to degraded catalyst species, which means that polymer formation is an inherent property of this catalyst system. The polymer output can be reduced largely by premixing Cp′TiCl3 and methyl aluminoxane (MAO) prior to injection into the reactor. It was also demonstrated that the type of MAO activator/impurity scavenger is of great importance. For a low yield of PE it is essential to use an MAO that does not contain and/or is not able to generate aluminum hydride species. In the end the best results with respect to both productivity and selectivity were obtained by starting from trimethyl titanium compounds.
