This chemical is called 3-(Trichlorosilyl)propyl methacrylate, and it can also be named as 2-Propenoic acid, 2-methyl-, 3-(trichlorosilyl)propyl ester. With the molecular formula of C₇H₁₁Cl₃O₂Si, its molecular weight is 261.61. The CAS registry number of this chemical is 7351-61-3. Additionally, its product category is Monomer.

Other characteristics of the 3-(Trichlorosilyl)propyl methacrylate can be summarised as followings: (1)ACD/LogP: 5.85; (2)# of Rule of 5 Violations: 1; (3)ACD/LogD (pH 5.5): 5.84; (4)ACD/LogD (pH 7.4): 5.84; (5)ACD/BCF (pH 5.5): 16288.32; (6)ACD/BCF (pH 7.4): 16288.32; (7)ACD/KOC (pH 5.5): 36012.1; (8)ACD/KOC (pH 7.4): 36012.1; (9)#H bond acceptors: 2; (10)#H bond donors: 0; (11)#Freely Rotating Bonds: 6; (12)Polar Surface Area: 26.3 Å²; (13)Index of Refraction: 1.468; (14)Molar Refractivity: 59.08 cm³; (15)Molar Volume: 212.3 cm³; (16)Polarizability: 23.42×10^-24cm³; (17)Surface Tension: 29.5 dyne/cm; (18)Density: 1.231 g/cm³; (19)Flash Point: 118.3 °C; (20)Enthalpy of Vaporization: 51.02 kJ/mol; (21)Boiling Point: 271.9 °C at 760 mmHg; (22)Vapour Pressure: 0.00627 mmHg at 25°C.

Production method of this chemical: The 3-(Trichlorosilyl)propyl methacrylate could be obtained by the reactant of methacrylic acid allyl ester. This reaction needs the reagents of Cl₃SiH, 0.05 N H₂PtCl₆, phenothiazine, and the solvent of tetrahydrofuran. The yield is 88 %. In addition, this reaction should be taken for half an hour at the temperature of 80 °C.

Uses of this chemical: The 3-(Trichlorosilyl)propyl methacrylate could react with acetic acid anhydride, and obtain the 3-(triacetoxysilyl)propyl methacrylate and acetyl chloride. This reaction needs the reagent of 2,6-di-tert-butyl-para-cresol. The yield is 81 %. In addition, this reaction should be taken for 4 hours at the temperature of 75-80 °C.

When you are using this chemical, please be cautious about it as the following: This chemical reacts violently with water. It causes burns. Wear suitable protective clothing, gloves and eye/face protection. In case of contacting with eyes, rinse immediately with plenty of water and seek medical advice. 

You can still convert the following datas into molecular structure: 
1.SMILES: Cl[Si](Cl)(Cl)CCCOC(=O)\C(=C)C
2.InChI: InChI=1/C7H11Cl3O2Si/c1-6(2)7(11)12-4-3-5-13(8,9)10/h1,3-5H2,2H3
3.InChIKey: DOGMJCPBZJUYGB-UHFFFAOYAQ