- Amino acid promoted CuI-catalyzed C-N bond formation between aryl halides and amines or N-containing heterocycles
-
CuI-catalyzed coupling reaction of electron-deficient aryl iodides with aliphatic primary amines occurs at 40 °C under the promotion of N-methylglycine. Using L-proline as the promoter, coupling reaction of aryl iodides or aryl bromides with aliphatic primary amines, aliphatic cyclic secondary amines, or electron-rich primary arylamines proceeds at 60-90 °C; an intramolecular coupling reaction between aryl chloride and primary amine moieties gives indoline at 70 °C; coupling reaction of aryl iodides with indole, pyrrole, carbazole, imidazole, or pyrazole can be carried out at 75-90 °C; and coupling reaction of electron-deficient aryl bromides with imidazole or pyrazole occurs at 60-90 °C to provide the corresponding N-aryl products in good to excellent yields. In addition, N,N-dimethylglycine promotes the coupling reaction of electron-rich aryl bromides with imidazole or pyrazole to afford the corresponding N-aryl imidazoles or pyrazoles at 110 °C. The possible action of amino acids in these coupling reactions is discussed.
- Zhang, Hui,Cai, Qian,Ma, Dawei
-
-
Read Online
- Magnetic nanoparticle-supported proline as a recyclable and recoverable ligand for the CuI catalyzed arylation of nitrogen nucleophiles
-
Magnetic nanoparticle-supported proline ligand was prepared and used for the CuI catalyzed Ullmann-type coupling reactions of aryl/heteroaryl bromides with various nitrogen heterocycles to form the corresponding N-aryl products in good to excellent yields
- Chouhan, Gagan,Wang, Dashan,Alper, Howard
-
-
Read Online
- Tuning the Copper(II)/Copper(I) Redox Potential for More Robust Copper-Catalyzed C–N Bond Forming Reactions
-
Complexes of copper and 1,10-phenanthroline have been utilized for organic transformations over the last 50 years. In many cases these systems are impacted by reaction conditions and perform best under an inert atmosphere. Here we explore the role the 1,1
- Biswas, Saborni,Cope, James D.,Emerson, Joseph P.,Goel, Ekta,Hall, Ruby S.,Hendrich, Michael P.,Riley, Kathleen M.,Stokes, Sean L.,Valle, Henry U.,Wipf, David O.
-
-
Read Online
- Unique copper-salen complex: An efficient catalyst for N-arylations of anilines and imidazoles at room temperature
-
We have reported here the catalytic activity of a unique Cu-salen type complex in N-arylation of anilines with arylboronic acids in water. The protocol is found to be applicable for a wide range of electronically diversified arylboronic acids and anilines with excellent yields of the isolated product. Further the scope of this protocol has been extended to the synthesis of various N-aryl imidazoles in iso-propanol.
- Gogoi, Ankur,Sarmah, Gayatri,Dewan, Anindita,Bora, Utpal
-
-
Read Online
- Two-dimensional copper-based metal-organic framework as a robust heterogeneous catalyst for the N-arylation of imidazole with arylboronic acids
-
N-arylation of imidazole was accomplished with a two-dimensional (2D) [Cu(ima)2]n metal-organic framework in methanol at room temperature. A variety of N-arylimidazoles were isolated in good yields after a short reaction time. Moreov
- Li, Zhao-Hao,Xue, Li-Ping,Wang, Lei,Zhang, Shuai-Tao,Zhao, Bang-Tun
-
-
Read Online
- Recyclable hydrophobic copper (II) phthalocyanine catalyzed N-arylation of imidazoles in dimethylsulfoxide
-
Copper (II) phthalocyanine (CuPc) was used as a catalyst for the N-arylation of imidazoles with aryl iodides or bromides. The catalyst showed high activity and could be reused 3 times without any significant loss in activity. The catalyst was characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and ultraviolet-visible spectroscopy.
- Huang, Qiang,Zhou, Limei,Jiang, Xiaohui,Qi, Xiaolong,Wang, Zhonghua,Lang, Wencheng
-
-
Read Online
- Synthesis, structure and stability of new PtII-bis(N- heterocyclic carbene) complexes
-
The use of metal acetates has allowed the synthesis of NHC complexes without isolation of the free carbene. This route is very useful in cases where the metal acetates are readily available and has been used, for example, for the synthesis of bis(N-hetero
- Ahrens, Sebastian,Herdtweck, Eberhardt,Goutal, Sigrid,Strassner, Thomas
-
-
Read Online
- Highly efficient copper-catalyzed formation of N-aryl diazoles using KF/A12O3
-
A simple and efficient method for the coupling of aryl iodides with heterocyclic compounds such as diazoles that does not require the use of alkoxide bases is described. The C-N bond forming procedure shows that the combination of air stable CuI and 1,10-phenanthroline in the presence of KF/Al2O3 comprises an extremely efficient and general catalyst system for the N-arylation of aryl iodides. Different functionalized aryl iodides were coupled with diazoles using this method. Georg Thieme Verlag Stuttgart.
- Hosseinzadeh, Rahman,Tajbakhsh, Mahmood,Alikarami, Mohammad
-
-
Read Online
- Synergistic catalysis for light-driven proton reduction using a polyoxometalate-based Cu-Ni heterometallic-organic framework
-
Synergistic effects of bimetallic Ni and Cu supported on metal-organic polymer composites based on Wells-Dawson P2W18O626- clusters as photosensitizer units were identified, and we report a novel approach for addressing these issues for dehydrogenation and hydrogen production reactions.
- Sun, Wenlong,He, Cheng,Liu, Tao,Duan, Chunying
-
-
Read Online
- Copper immobilized on magnetite nanoparticles coated with ascorbic acid: An efficient and reusable catalyst for C─N and C─O cross-coupling reactions
-
In a continuation of using magnetic nanoparticle (MNP)-supported catalysts, ascorbic acid (readily available, very safe and with strong affinity to MNPs) was used instead of the commonly used silica layer coating. This hybrid was used for immobilizing copper nanoparticles to produce Cu/ascorbic acid@MNPs catalyst. The catalyst was characterized and used in carbon–oxygen and carbon–nitrogen (various substrates) cross-coupling reactions in aqueous media and at room temperature with excellent product yields. Furthermore, the catalyst could be quickly and completely recovered using an external magnetic field and reused for six reaction cycles without significant change in catalytic activity.
- Hajipour, Abdol R.,Check, Maryam,Khorsandi, Zahra
-
-
Read Online
- Efficient use of a surfactant for copper-catalyzed coupling reaction of arylboronic acids with imidazoles in water
-
Copper-catalyzed oxidative coupling of arylboronic acids with imidazoles in water was realized by using an amphiphilic surfactant. By choosing an appropriate surfactant, reactions of a variety of arylboronic acids proceeded smoothly under mild and base-fr
- Inamoto, Kiyofumi,Nozawa, Kanako,Kadokawa, Jun,Kondo, Yoshinori
-
-
Read Online
- Copper nanoparticle anchored biguanidine-modified Zr-UiO-66 MOFs: a competent heterogeneous and reusable nanocatalyst in Buchwald-Hartwig and Ullmann type coupling reactions
-
We have designed a functionalized metal-organic framework (MOF) of UiO topology as a support, with an extremely high surface area, adjustable pore sizes and stable crystalline coordination polymeric structure and implanted copper (Cu) nanoparticles thereon. The core three dimensional Zr-derived MOF (UiO-66-NH2) was modified with a biguanidine moiety following a covalent post-functionalization approach. The morphological and physicochemical features of the material were determined using analytical methods such as FT-IR, SEM, TEM, EDX, atomic mapping, XRD and ICP-OES. The SEM and XRD results justified the unaffected morphology of Zr-MOF after structural modifications. The as-synthesized UiO-66-biguanidine/Cu nanocomposite was catalytically explored in the aryl and heteroaryl Buchwald-Hartwig C-N and Ullmann type C-O cross coupling reactions with excellent yields. A library of biaryl amine and biaryl ethers was synthesized over the catalyst under mild and green conditions. Furthermore, the catalyst was isolated by centrifugation and recycled 11 times with no significant copper leaching or change in its activity.
- Veisi, Hojat,Neyestani, Narges,Pirhayati, Mozhgan,Ahany Kamangar, Sheida,Lotfi, Shahram,Tamoradi, Taiebeh,Karmakar, Bikash
-
-
Read Online
- An efficient copper-catalyzed coupling of aryl halides with imidazoles
-
Copper-catalyzed N-arylation of imidazoles can be accomplished using (CuOTf)2 · benzene as a copper source and Cs2CO3 as a base in xylenes at 110-125 °C. Addition of 1,10-phenanthroline (phen) and trans, trans- dibenzylide
- Kiyomori, Ayumu,Marcoux, Jean-Francois,Buchwald, Stephen L.
-
-
Read Online
- L-Proline Promoted Ullmann-Type Coupling Reactions of Aryl Iodides with Indoles, Pyrroles, Imidazoles or Pyrazoles
-
The Ullmann-type coupling reactions of aryl iodides and several nitrogen heterocycles occur at 80-90°C with L-proline as additive, giving N-arylpyrroles, N-arylindoles, N-arylimidazoles, and N-pyrazoles in good to excellent yields.
- Ma, Dawei,Cai, Qian
-
-
Read Online
- CuI nanoparticles for C-N and C-O cross coupling of heterocyclic amines and phenols with chlorobenzenes
-
(Chemical Equation Presented) Employing CuI nanoparticles as an efficient catalyst for the cross-coupling reactions of various N/O nucleophilic reagents with aryl chlorides could be successfully carried out under mild conditions in the absence of both the ligands and strong bases. A variety of products including N-arylimidazoles and aryl ethers were synthesized in good to excellent yields. 2009 American Chemical Society.
- Sreedhar,Arundhathi,Reddy, P. Linga,Kantam, M. Lakshmi
-
-
Read Online
- Copper-catalyzed arylation of nitrogen heterocycles from anilines under ligand-free conditions
-
The arylation of pyrazole and derivatives can be achieved by coupling arenediazonium species (formed in situ from anilines) by using a catalytic system that employs low-toxicity and inexpensive copper metal under very mild and ligand-free conditions (T = 20 ° C). From other nitrogen heterocycles, the presence of an additive (NBu4I) significantly improves the efficiency of the catalytic system. These results represent the first examples of C-N bond formation from arenediazonium species.
- Toummini, Dounia,Tlili, Anis,Bergs, Julien,Ouazzani, Fouad,Taillefer, Marc
-
-
Read Online
- CopperII phthalocyanine as an efficient and reusable catalyst for the N-arylation of nitrogen containing heterocycles
-
Copper phthalocyanine (CuIIPc) was found to be an efficient catalyst for the catalyzed N-arylation of N–H heterocycles with aryl iodides and bromides under mild reaction conditions. A variety of hindered and functionalized N–H heterocycles and aryl halides were successfully used as the substrates for the given catalytic reaction and were transformed in good to excellent yields.
- Yadav, Kumar Karitkey,Narang, Uma,Bhattacharya, Soumee,Chauhan, Shive M.S.
-
-
Read Online
- Highly-efficient N-arylation of imidazole catalyzed by Cu(II) complexes with quaternary ammonium-functionalized 2-acetylpyridine acylhydrazone
-
The reaction of (E)-N,N,N-trimethyl-2-oxo-2-(2-(1-(pyridin-2-yl)ethylidene)hydrazinyl)ethan-1-aminium-chloride (HLCl) with copper(II) perchlorate led to mononuclear [CuLCl]ClO4 complex (1). The same reaction with excess of sodium azide gives di
- Milenkovi?, Milica R.,Papastavrou, Argyro T.,Radanovi?, Du?anka,Pevec, Andrej,Jagli?i?, Zvonko,Zlatar, Matija,Gruden, Maja,Vougioukalakis, Georgios C.,Turel, Iztok,An?elkovi?, Katarina,?obelji?, Bo?idar
-
-
Read Online
- An efficient base-free N-arylation of imidazoles and amines with arylboronic acids using copper-exchanged fluorapatite
-
(Chemical Equation Presented) N-Arylation of imidazoles and amines with arylboronic acids was accomplished with copper-exchanged fluorapatite (Cu-FAP) in methanol at room temperature. The products N-arylimidazoles and N-arylamines were isolated in good to excellent yields. A variety of arylboronic acids were converted to the corresponding N-arylimidazoles and N-arylamines, demonstrating the versatility of the reaction.
- Kantam, M. Lakshmi,Venkanna, Gopaldasu T.,Sridhar, Chidara,Sreedhar, Bojja,Choudary, Boyapati M.
-
-
Read Online
- Highly efficient and mild copper-catalyzed N- and C-arylations with aryl bromides and iodides
-
Mild, efficient, copper-catalyzed N-arylation procedures for nitrogen heterocycles, amides, carbamates, and C-arylation procedures for malonic acid derivatives have been developed that afford high yields of arylated products with excellent selectivity. The N-arylation of imidazole with aryl bromides or iodides was found to be greatly accelerated by inexpensive, air-stable catalyst systems, combining catalytic copper salts or oxides with a set of structurally simple chelating ligands. The reaction was shown to be compatible with a broad range of aryl halides, encompassing sterically hindered, electron-poor, and electron-rich ones, providing the arylated products under particularly mild conditions (50-82°C). The lower limit in ligand and catalyst loading and the scope of Ullmann-type condensations catalyzed by complexes bearing those ligands with respect to the nucleophile class have also been investigated. Chelating Schiff base Chxn-Py-Al (1c) generates a remarkably general copper catalyst for N-arylation of pyrrole, indole, 1,2,4-triazole, amides, and carbamates; and C-arylation of diethyl malonate, ethyl cyanoacetate, and malononitrile with aryl iodides under mild conditions (50-82°C). The new method reported here is the most successful to date with regard to Ullmann-type arylation of some of these nucleophiles.
- Cristau, Henri-Jean,Cellier, Pascal P.,Spindler, Jean-Francis,Taillefer, Marc
-
-
Read Online
- Intercalation of copper salt to montmorillonite K-10 and its application as a reusable catalyst for Chan–Lam cross-coupling reaction
-
A simple and efficient catalytic system has been developed by adsorption of copper salt in the interlayers of montmorillonite K-10. The catalytic system impressively exercises the green chemistry perspective leading to effortless recovery and recyclabilit
- Sarmah, Manashi,Dewan, Anindita,Boruah, Purna K.,Das, Manash R.,Bora, Utpal
-
-
Read Online
- A novel two-dimensional metal-organic framework as a recyclable heterogeneous catalyst for the dehydrogenative oxidation of alcohol and theN-arylation of azole compounds
-
A novel metal-organic framework (MOF) with two-dimensional (2D) crystal structure was developed using Cu(NO3)2·3H2O and 2,2′,5,5′-tetramethoxy-[1,1′-biphenyl]-4,4′-dicarboxylic acid. Further, its structure was characterized using infrared spectroscopy, thermogravimetry, X-ray diffraction, and X-ray crystallography. The activated Cu-MOF was used to catalyze the dehydrogenative oxidation of alcohol andN-arylation of azole compounds. Furthermore, it could be easily recovered and reused.
- Liu, Chengxin,Cui, Jin,Wang, Yufang,Zhang, Mingjie
-
-
Read Online
- A metal-organic framework Cu2(BDC)2(DABCO) as an efficient and reusable catalyst for Ullmann-type N-arylation of imidazoles
-
A highly porous metal-organic framework (Cu2(BDC)2(DABCO)) was synthesized and used as an efficient and recyclable heterogeneous catalyst for the Ullmann-type N-arylation of aryl halides with imidazoles. The Cu2(BDC)2(DABCO) was characterized by several techniques, including X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis, Fourier transform infrared, atomic absorption spectrophotometry, and nitrogen physisorption measurements. The catalyst offered high activity under mild conditions, confirming outstanding advantages when employing the Cu2(BDC)2(DABCO) as catalyst for Ullmann-type N-arylation reaction. The catalyst could be separated from the reaction mixture by simple filtration, and could be reused without a significant degradation in catalytic activity.
- Nguyen, Tung T.,Phan, Nam T. S.
-
-
Read Online
- An efficient polymer-supported copper(II) catalyst for the N-arylation reaction of N(H)-heterocycles with aryl halides as well as arylboronic acids
-
Immobilization of copper onto polystyrene provided a polymer-supported copper(II) catalyst, which was effective in cross-coupling reactions between N-containing substrates and arylboronic acids using methanol as a solvent in air under base-free conditions
- Islam, Manirul,Mondal, Sanchita,Mondal, Paramita,Roy, Anupam Singha,Tuhina, Kazi,Salam, Noor,Paul, Sumantra,Hossain, Dildar,Mobarok, Manir
-
-
Read Online
- Iron oxide encapsulated by copper-Apatite: An efficient magnetic nanocatalyst for: N-Arylation of imidazole with boronic acid
-
N-Arylation of imidazole was carried out with various arylboronic acids on iron oxide encapsulated by copper-Apatite (Fe3O4?Cu-Apatite), producing excellent yields. Firstly, the iron nanoparticles were prepared using a solvothermal m
- Amadine, Othmane,Essamlali, Younes,Amedlous, Abdallah,Zahouily, Mohamed
-
-
Read Online
- Copper fluorapatite catalyzed N-arylation of heterocycles with bromo and iodoarenes
-
Copper exchanged fluorapatite (CuFAP) is an effective heterogeneous catalyst for N-arylation of heterocycles with bromo- or iodoarenes using K2CO3 as base. N-Arylated products were isolated in good to excellent yields, demonstrating the versatility of the reaction.
- Lakshmi Kantam,Venkanna,Sridhar,Shiva Kumar
-
-
Read Online
- A highly versatile catalytic system for N-arylation of amines with aryl chlorides in water
-
The C-N coupling between nucleophiles and aryl chlorides, which are less expensive, less reactive, and more abundant than their bromide and iodide counterparts, is challenging but of great interest for industrial applications. An oxalyldihydrazide/hexane-2,5-dione (100-150 mol-%)/CuO system was found to enable the reaction of a wide range of nucleophiles with a variety of aryl chlorides in water for the first time.
- Huang, Manna,Lin, Xiaoqin,Zhu, Xinhai,Peng, Weili,Xie, Jianwei,Wan, Yiqian
-
-
Read Online
- Chan–Lam cross-coupling reactions promoted by anionic copper(I)/iodide species with cationic methyl-((pyridinyl)-pyrazolyl)pyridin-1-ium
-
Four anionic ligands including 1-methyl-3(or 4)-(1-(pyridin-2-yl)-1H-pyrazol-3-yl)pyridin-1-ium iodide ([3,2′-pypzpym]I, [4,2′-pypzpym]I) and 1-methyl-3(or 4)-(3-(pyridin-2-yl)-1H-pyrazol-1-yl)pyridin-1-ium iodide ([2,3′-pypzpym]I, [2,4′-pypzpym]I) are prepared. Reaction of CuI with [3,2′-pypzpym]I affords a mononuclear complex [CuI2(3,2′-pypzpym)] (1) and a one-dimensional coordination polymer [(Cu4I6)(3,2′-pypzpym)2]n(2). Analogous reactions of CuI with [4,2′-pypzpym]I, [2,3′-pypzpym]I or [2,4′-pypzpym]I yield [Cu4I6(4,2′-pypzpym)2] (3), [CuI2(2,3′-pypzpym)] (4) and [CuI2(2,4′-pypzpym)] (5), respectively. Relative to that of CuI, complexes 1–5 exhibit enhanced catalytic activities towards the Chan–Lam cross-coupling reactions of imidazole and arylboronic acids in a H2O[sbnd]MeCN (v/v=2:1). This catalytic system is involved in the C[sbnd]N cross-coupling reaction and works for a variety of imidazole derivatives as well as arylboronic acids with different electronic properties.
- Xue, Jiang-Yan,Li, Jun-Chi,Li, Hong-Xi,Li, Hai-Yan,Lang, Jian-Ping
-
-
Read Online
- Efficient N-arylation catalyzed by a copper(I) pyrazolyl-nicotinic acid system
-
Catalyst 6-(1H-pyrazol-1-yl)nicotinic acid L-CuCl behaves as a very active promoter of the N-arylation reactions, as it has been demonstrated with varieties of substrates under mild reaction conditions. A Cu(I) complex based on L of precatalyst has been isolated by a hydrothermal method and structurally characterized.
- Liu, Hai-Yang,Yu, Zhen-Tao,Yuan, Yong-Jun,Yu, Tao,Zou, Zhi-Gang
-
-
Read Online
- Efficient and recyclable copper-based MOF-catalyzed N-arylation of N-containing heterocycles with aryliodides
-
Copper-based MOF-199 was used as an efficient heterogeneous catalyst to catalyze cross-coupling reactions between N-containing heterocycles and aryliodides with high yields. The catalyst can be easily separated from the reaction mixture, and can be reused at least 5 times without significantly decreasing the activity. The XRD results showed that the crystallinity and structure of MOF-199 can be maintained well during the coupling reaction.
- Li, Zihao,Meng, Fei,Zhang, Jie,Xie, Jianwei,Dai, Bin
-
-
Read Online
- An efficient d-glucosamine-based copper catalyst for C-X couplings and its application in the synthesis of nilotinib intermediate
-
d-Glucosamine has been studied for C-N and C-S bond formations via cross-coupling reactions of nitrogen and sulfur nucleophiles with both aryl iodides and bromides. Imidazoles, benzimidazole, indole, pyrrolidine and diphenyl disulfide undergo reactions with aryl halides in the presence of 10 mol% d-glucosamine, 10 mol% CuI, and 2 equiv. of Cs2CO3 in DMSO-H2O at moderate temperature to give the corresponding products in good to excellent yields. Substrates bearing halides, free amino groups, trifluoromethyl and heterocycles were well tolerated. The high water solubility of the ligand enables easy catalyst removal. In addition, the application of this catalytic system for the synthesis of nilotinib intermediate was also successfully demonstrated using commercially available substrates. This journal is
- Wen, Ming,Shen, Chao,Wang, Linfang,Zhang, Pengfei,Jin, Jianzhong
-
-
Read Online
- A reusable polymer supported copper(I) complex for the C-N bond cross-coupling reaction
-
The Ullmann coupling of amines with aryl iodide as well as arylboronic acids and N(H)-heterocycles with arylboronic acids has been carried out efficiently using PS-LCu(I) catalyst. The copper complex has been prepared and characterized by using scanning electron microscope (SEM), elemental analysis, atomic absorption spectroscopy (AAS), Thermo gravimetric analysis and spectrometric methods like Fourier transform infrared spectroscopy (FTIR). The effects of various parameters such as temperature, solvent and base on the reaction system were studied. The reusability experiments show that the catalyst can be used five times without much loss in the catalytic activity.
- Islam,Mondal, Sanchita,Mondal, Paramita,Roy, Anupam Singha,Tuhina, Kazi,Mobarok, Manir
-
-
Read Online
- N-terminal strategy (N1-N4) toward high performance liquid crystal materials
-
Liquid crystal materials have a variety of applications in many fields such as display techniques as well as photonics and optics. However, only few design principles have been disclosed on liquid crystal materials with different N-heterocycles as the terminal groups, which hinder the development of the heterocyclic liquid crystals. Here, a strategy of molecular design for N-heterocyclic liquid crystal materials is reported. On the basis of this strategy, a series of convenient N-heterocycles such as pyrrole, pyrazole, imidazole, 1,2,3-triazole, 1,2,4-triazole, 1,2,3,4-tetrazole were applied to synthesize the novel liquid crystals. Most of them have proved to exhibit good mesomorphic behaviors which make them excellent components in the mixture of the LCDs materials. The simple attachment of N-heterocyclic units to the liquid crystal molecules through a mild reaction condition will provide a good prospect for the design of N-heterocyclic liquid crystals.
- Hong, Fengying,Xia, Zhengce,Zhu, Dezhao,Wu, Hongxiang,Liu, Jianhui,Zeng, Zhuo
-
-
Read Online
- Dendrimer-encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe3O4@SiO2 nanoparticles as a novel recyclable catalyst for N-arylation of nitrogen heterocycles and green synthesis of 5-substituted 1H-tetrazoles
-
In this study, dendrimer-encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe3O4@SiO2 nanoparticles were prepared via a multistep-synthesis. Then, the synthesized composite was fully characterized by various techniques such as fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), dynamic light scattering (DLS), UV-vis spectroscopy, energy dispersive X-ray analysis (EDX), thermogravimetric analysis (TGA) and vibration sample magnetometer (VSM). From the information gained by. FE-SEM and TEM studies it can be inferred that the particles are mostly spherical in shape and have an average size of 50?nm. Also, the amount of Cu is determined to be 0.51?mmol/g in the catalyst by inductively coupled plasma (ICP) analyzer. This magnetic nano-compound has been successfully applied as a highly efficient, magnetically recoverable and stable catalyst for N-arylation of nitrogen heterocycles with aryl halides (I, Br) and arylboronic acids without using external ligands or additives. The catalyst was also employed in a one-pot, three-component reaction for the efficient and green synthesis of 5-substituted 1H-tetrazoles using various aldehydes, hydroxylamine hydrochloride and sodium azide in water. The magnetic catalyst can be easily separated by an external magnet bar and is recycled seven times without significant loss of its activity.
- Esmaeilpour, Mohsen,Sardarian, Ali Reza,Firouzabadi, Habib
-
-
Read Online
- Oxazolidin-2-one as efficient ligand for the copper-catalyzed N- Arylation of pyrrole, imidazole and indole
-
Oxazolidin-2-one was found to be a facile ligand for the N-arylation of pyrrole, indole, and imidazole with aryl and heteroaryl iodides, bromides, and chlorides by applying Cul as catalyst. The easy preparation, commercial availability, lower molecular weight, and broad substrate applicability, as well as substituent compatibility of this catalysis system render oxazolidin-2-one great advantages over the Cu-catalyzed methods that have already been utilized in a number of applications.
- Ma, Hengchang,Wu, Shang,Sun, Qiangsheng,Lei, Ziqiang
-
-
Read Online
- A simple and efficient catalytic system for N-arylation of imidazoles in water
-
A study was conducted to develop a simple and efficient catalytic system for N-arylation of immidazoles in water. Demonstrations revealed that the catalytic system contained a number of significant advantages. Some of these advantages included the use of water as a green solvent in place of volatile organic solvents and the catalysis was performed without an inert gas atmosphere and with low catalyst loading. Investigations revealed that the presence of catalyst and PTC were essential for the catalysis reaction. The scope of aryl halide substrates was investigated by using the catalytic system under the optimized reaction conditions. It was also demonstrated that the catalytic system tolerated a variety of functionalized aryl halides in the reaction, including nitrile, nitro, acetyl, and ether groups. The new catalytic system was applied to a variety of imidazole derivatives to expand the scope of the methodology.
- Wang, Yi,Wu, Zhiqing,Wang, Lixia,Li, Zhengkai,Zhou, Xiangge
-
-
Read Online
- Copper-catalyzed N-arylation of diazoles with aryl bromides using KF/Al2O3: an improved protocol
-
Copper-catalyzed N-arylation of diazoles can be accomplished using air-stable CuI as a copper source and 1,10-phenanthroline in the presence of KF/Al2O3 as a base. This is a simple and efficient method for the coupling of aryl bromide with diazoles. Different functionalized aryl bromides were coupled with diazoles using this system.
- Hosseinzadeh, Rahman,Tajbakhsh, Mahmood,Alikarami, Mohammad
-
-
Read Online
- Nano-magnetic Fe3O4@TiO2/Cu2O composite: a simple, effective and reusable heterogeneous catalyst for ligand-free N-arylation of amines and nitrogen heterocycles
-
Abstract: A practical and mild synthetic strategy has been investigated for the arylation of aromatic amines and nitrogen heterocycles using nano-magnetic-Fe3O4@TiO2/Cu2O composite and KOH as the base. The protocol does not require the use of expensive ligands. Notably, the catalyst is easily recoverable and reused by magnetic separation up to five runs without appreciable loss of catalytic activity. Graphical Abstract: [Figure not available: see fulltext.]
- Nemati, Firouzeh,Elhampour, Ali
-
-
Read Online
- 3-acetylcoumarin as a practical ligand for copper-catalyzed C-N coupling reactions at room temperature
-
The use of coumarin-based ligands was examined in copper-catalyzed C-N cross-coupling reactions. It was found that 3-acetylcoumarin constituted a new, practical ligand for the copper-catalyzed N-arylation of aliphatic amines and imidazole with aryl iodides at room temperature. Aryl bromides could also be aminated efficiently at 80 C. This readily available catalyst system, namely copper(I) iodide and 3-acetylcoumarin, provides a mild and practical method for the synthesis of aromatic amines. Georg Thieme Verlag Stuttgart New York.
- Tao, Chuan-Zhou,Liu, Wei-Wei,Sun, Ji-You,Cao, Zhi-Ling,Li, Hui,Zhang, Ying-Fen
-
-
Read Online
- A facile and efficient oxalyldihydrazide/ketone-promoted copper-catalyzed amination of aryl halides in water
-
A novel three-component catalyst CuO/oxalyldihydrazide/hexane-2,5-dione was a very convenient, economic, and effective catalytic system for the Ullmann-type C-N coupling reaction in water. Both aryl bromides and aryl iodides could be aminated by a variety of amines even at room temperature or with heating to afford very good isolated yields.
- Zhu, Xinhai,Su, Li,Huang, Liye,Chen, Gong,Wang, Jinlong,Song, Huacan,Wan, Yiqian
-
-
Read Online
- Copper complex-catalysed C-N coupling reaction of aryl iodides with nitrogen-containing heterocycles
-
An efficient method for the copper-catalysed arylation of nitrogen-containing heterocycles is reported using 3-(diphenylphosphino) propanoic acid as a ligand in combination of CuCl. The C-N coupling reactions afford various N-arylated products in good to excellent yields.
- Sajadi, S. Mohammad,Maham, Mehdi
-
-
Read Online
- Ligand-free copper(I) catalyzed N- and O-arylation of aryl halides
-
A simple and industrially viable protocol for C-N and C-O coupling is reported here. Arylation of phenol, benzylamine and imidazole with aryl bromides is achieved using ligand-free Cu(I) halide salts in low catalytic amount (2.5 mol %).
- Sperotto, Elena,de Vries, Johannes G.,van Klink, Gerard P.M.,van Koten, Gerard
-
-
Read Online
- Trinuclear copper(I) complexes with triscarbene ligands: Catalysis of C-N and C-C coupling reactions
-
Novel synthetic routes for the preparation of trinuclear copper(I) complexes with triscarbene ligands are presented, which yield higher purity products than the one previously described. The first crystal structure of one of these complexes is reported an
- Biffis, Andrea,Tubaro, Cristina,Scattolin, Elena,Basato, Marino,Papini, Grazia,Santini, Carlo,Alvarez, Eleuterio,Conejero, Salvador
-
-
Read Online
- Cu2O/nano-CuFe2O4: An efficient and magnetically recoverable catalyst for the ligand-free N-arylation of amines and nitrogen heterocycles with aryl halides
-
An efficient strategy has been developed for the N-arylation of azoles and aliphatic amines with aryl halide using a Cu2O/nano-CuFe2O4 magnetic composite as the catalyst and KOH as the base. The methodology is found to be applicable to a variety of nitrogen-containing heterocycles, such as imidazole, indole, and pyrrole, as well as aliphatic amines in high yields with practical simplicity under cost-effective "ligand-free" conditions. The magnetic property of the catalyst allowed its fast separation from the reaction medium by an external magnet. Additionally, the inexpensive catalyst could be recycled for five consecutive runs with small drops in catalytic activity.
- Elhampour, Ali,Nemati, Firouzeh,Kaveh, Mahdieh
-
-
Read Online
- Commercial drug norfloxacin as a novel ligand for the copper-catalyzed N-arylation of imidazole with aryl halides
-
Norfloxacin was used as an efficient ligand for the CuBr-catalyzed C-N coupling reaction of imidazole and aryl halides. The protocol presented good functional group compatibility, permitting many aryl halides to react with imidazole to form the desired products in good to excellent yields.
- Wu, Fengtian,Nan, Chenlong,Ma, Minyang,Li, Huiqin,Xie, Jianwei
-
-
Read Online
- Direct N-arylation of azaheterocycles with aryl halides under ligand-free condition
-
A simple and efficient Ci£N cross-coupling method of aryl halides with various heterocycles was reported, by using 10 mol% of CuI as catalyst and 1.2 equiv. NaH as base. Aryl iodides, aryl bromides and many substituted aryl chlorides could efficiently react with heterocycles, providing variety of N-arylated products in good to excellent yields. The ligand-free catalyst system was stable in air and could be readily reused. An efficient, convenient and applicable method was developed for the N-arylation of azaheterocycles catalyzed by CuI and NaH under ligand free condition. Copyright
- Yang, Qichao,Wang, Yufang,Zhang, Baoji,Zhang, Mingjie
-
-
Read Online
- High-performance sono/nano-catalytic system: CTSN/Fe3O4-Cu nanocomposite, a promising heterogeneous catalyst for the synthesis of: N -arylimidazoles
-
Herein, a promising heterogeneous nanoscale catalytic system constructed of chitosan (CTSN, as a polymeric basis), iron oxide nanoparticles (Fe3O4 NPs, as the magnetic agent), and copper oxide nanoparticles (CuO NPs, as the main cata
- Taheri-Ledari, Reza,Hashemi, Seyed Masoud,Maleki, Ali
-
-
Read Online
- 2-Aminopyrimidine-4,6-diol as an efficient ligand for solvent-free copper-catalyzed N-arylations of imidazoles with aryl and heteroaryl halides
-
Efficient and solvent-free copper-catalyzed N-arylations of imidazoles with aryl and heteroaryl halides have been demonstrated. In the presence of CuBr, 2-aminopyrimidine-4,6-diol, and TBAF (n-Bu4NF), a variety of imidazoles underwent the N-arylation reaction with aryl and heteroaryl halides smoothly in moderate to excellent yields. Noteworthy is that the reaction is conducted under solvent-free conditions.
- Xie, Ye-Xiang,Pi, Shao-Feng,Wang, Jian,Yin, Du-Lin,Li, Jin-Heng
-
-
Read Online
- Salen complex of Cu(II) supported on superparamagnetic Fe3O4@SiO2 nanoparticles: an efficient and magnetically recoverable catalyst for N-arylation of imidazole with aryl halides
-
Abstract: The Fe3O4@SiO2/Salen-Cu(II) nanocatalyst is reported as a thermally and air-stable, economical, and magnetically recoverable heterogeneous catalyst for the selective and efficient N-(hetero)arylation of imidazole. Only by adding a small amount of the catalyst (0.4?mol% Cu) to the reactants and heating under air, the new presented method provides a variety of functionalized and hindered N-(hetero)arylimidazoles in good to excellent yields within short reaction times. The catalyst could be easily recovered with the aid of a permanent magnet and reused up to five consecutive runs without significant loss of activity. Also, the leaching of Cu was negligible after the fifth recycle. Particularly, using either (hetero)aryl iodides or bromides as arylating agents and the need of only small amount of the magnetically recoverable heterogeneous copper-based nanocatalyst make this method low-cost, environmentally benign, and easy to use. Graphical abstract: [Figure not available: see fulltext.].
- Sardarian, Ali Reza,Zohourian-Mashmoul, Neda,Esmaeilpour, Mohsen
-
-
Read Online
- Reduction system “vitamin C/glycerol” promoted copper(II)-catalyzed N-arylation
-
The common access to forming C-N bond is the copper-catalyzed Ullmann-type reaction. The relatively expensive and easily oxidized copper(I) is usually used in the reaction. Our group discovered that the “vitamin C/glycerol” reduction system could convert cheap and stable CuO to active low valence state copper species, as measured via X-ray photoelectron spectroscopy (XPS), to promote the C-N coupling reaction. In particular, 2-phenylindole, pyrrolo[1,2-a]quinoxaline, 1,2,4-triazole and 4-amino-7H-pyrrolo[2,3-d]pyrimidine derivative were obtained in the presence of CuO and reduction system “vitamin C/glycerol.” This method provided a simple and cost-effective approach to the preparation of N-arylation products.
- Cui, Chunna,Liu, Xiuping,Sun, Yijia,Wang, Peng,Wu, Fengtian,Wu, Ling,Yan, Fangming,Zeng, Rong,Zhang, Caihong
-
-
- NHC ligand-based half-sandwich iridium complexes: synthesis, structure and catalytic activity in acceptorless dehydrogenation and transfer hydrogenation
-
A set of neutral C,C-chelate half-sandwich iridium(iii) complexes have been prepared with NHC ligands that contain pendant aromatic rings as potentially chelating donor sites. The catalytic activity of such iridium complexes has been investigated for the acceptorless dehydrogenation (AD) reactions of alcohols and for the transfer hydrogenation reactions of ketones. The prepared iridium(iii) complexes show excellent catalytic activity for AD reactions of a wide range of secondary alcohols, and they are also shown to be effective for the synthesis of aldehydes from primary alcohols without the observation of undesired byproducts such as esters. Additionally, these complexes are also highly efficient in transfer hydrogenation of ketones and aldehydes, which give the alcohols in good yields under mild conditions. The exact structure and bonding mode of the NHC-based iridium complexes was identified using various spectroscopic methods and single crystal X-ray analysis.
- Deng, Wei,Jin, Yan,Li, Rong-Jian,Liu, Zhen-Jiang,Wang, Yang,Yao, Zi-Jian
-
p. 19002 - 19010
(2021/10/29)
-
- L-Proline N-oxide dihydrazides as an efficient ligand for cross-coupling reactions of aryl iodides and bromides with amines and phenols
-
A novel catalytic system based on L-proline N-oxide/CuI was developed and applied to the cross-coupling reactions of various N- and O- nucleophilic reagents with aryl iodides and bromides. This strategy featured in the employment of an-proline derived dihydrazides N-oxide compound as the superior supporting ligand. By using this protocol, a variety of products, including N-arylimidazoles, N-arylpyrazoles, N-arylpyrroles, N-arylamines, and aryl ethers, were synthesized with up to 99% yield.
- Ding, Zhiqiang,Nie, Nan,Chen, Tian,Meng, Lingxin,Wang, Gongshu,Chen, Zhangpei,Hu, Jianshe
-
supporting information
(2020/12/21)
-
- Preparation method 4 - (imidazol -1 -yl) phenol
-
The invention discloses a preparation method of 4 - (imidazol -1 -yl) phenol, and belongs to the field of in-vitro diagnosis. The catalyst is prepared by taking bromoanisole and imidazole as raw materials. The organic phase is extracted with saturated bri
- -
-
Paragraph 0035-0036; 0040-0041; 0043-0044; 0046-0047
(2021/10/20)
-
- A Pd/Cu-Free magnetic cobalt catalyst for C-N cross coupling reactions: synthesis of abemaciclib and fedratinib
-
Herein, the synthesis of a nano-catalytic system comprising magnetic nanoparticles as the core and edible natural ligands bearing functional groups as supports for cobalt species is described. Subsequent to its characterization, the efficiency of the catalyst was investigated for C-N cross-coupling reactions using assorted derivatives of amines and aryl halides. This novel and easily accessible Pd- and Cu-free catalyst exhibited good catalytic activity in these reactions using γ-valerolactone (GVL) at room temperature; good recyclability bodes well for the future application of this strategy. The introduced catalytic system is attractive in view of the excellent efficiency in an array of coupling reactions and its versatility is illustrated in the synthesis of abemaciclib and fedratinib, which are FDA-approved new and significant anti-cancer medicinal compounds that are prepared under green reaction conditions.
- Hajipour, Abdol R.,Khorsandi, Zahra,Sarfjoo, Mohamad Reza,Varma, Rajender S.
-
supporting information
p. 5222 - 5229
(2021/07/29)
-
- Immobilization of copper(II) into polyacrylonitrile fiber toward efficient and recyclable catalyst in Chan-Lam coupling reactions
-
A series of polyacrylonitrile fiber (PANF)-supported copper(II) catalysts were prepared through the immobilization of Cu(II) into prolinamide-modified PANF (PANPA-2F) and subsequently used for the synthesis of diverse N-arylimidazoles from arylboronic acids and imidazole. The prepared Cu(II)@PANPA-2Fs were well characterized by mechanical strength, FT-IR, XRD, XPS and SEM. Among them, CuCl2@PANPA-2F exhibited excellent catalytic performance, and its activity was significantly affected by the Cu loading. This catalytic system also displayed good activity in the synthesis of N-arylsulfonamides from arylboronic acids and tosyl azide. It was highly efficient in gram-scale reactions and could be reused five times. The advantages of low cost, easy preparation, good durability and facile recovery make the fiber catalyst attractive.
- Zhang, Chenlu,Zhu, Hai,Gang, Kaiyue,Tao, Minli,Ma, Ning,Zhang, Wenqin
-
-
- Cu(OAc)2-porphyrins as an efficient catalytic system for base-free, nature mimicking Chan–Lam coupling in water
-
The use of porphyrins as ligands in organic synthesis reveals the natural process, because these are the constituent motifs of catalysts in many bio-organic reactions. This article presents the synthesis of two N-pincer tetradentate porphyrins; tetrasodium meso-tetra(p-sulfonatophenyl)phorphyrin (H2TSTpSPP) and meso-tetra(m-carboxyphenyl)porphyrin (H2TmCPP), and study on their aptness for Cu-catalyzed C–N coupling reactions of arylboronic acids and amines (Chan–Lam coupling reaction) in water under external base free conditions. The porphyrins and Chan–Lam coupling products were well characterized by their spectral analysis. The high product yields, application of nature-inspired conditions, large extent of substrates, ease of making and handling the ligands, avoidance of base, and use of water as reaction media are the attractive attributes of this finding.
- Venkateswarlu, Katta,Rao, Kanusu Umamaheswara
-
-
- Core-shell Cu2S:NiS2@C hybrid nanostructure derived from a metal-organic framework with graphene oxide for photocatalytic synthesis of N-substituted derivatives
-
Recently, photocatalysis has attracted considerable interest, leading to opportunities for using renewable energy sources. A Cu:Ni metal-organic framework (MOF) modified with graphene oxide (GO) was fabricated by a facile and convenient process. Subsequen
- Yusuf, Mohammad,Hira, Shamim Ahmed,Lim, Hyeonhan,Song, Sehwan,Park, Sungkyun,Park, Kang Hyun
-
p. 9018 - 9027
(2021/04/16)
-
- Tunable aryl imidazolium ionic liquids (TAIILs) as environmentally benign catalysts for the esterification of fatty acids to biodiesel fuel
-
Herein, we describe the synthesis of tunable aryl imidazolium ionic liquid catalysts and tested for esterification of fatty acids to biodiesel. In this work, six tunable aryl imidazolium ionic liquids (TAIILs) 1a-1f were prepared. These ionic liquids were used as the economical and reusable catalysts for the synthesis of biodiesel fuels. The reaction has been preceded in a monophase at 80 °C for 4 h, after which the product was separated from the catalyst system by a simple liquid/liquid phase separation at room temperature with excellent yields. With the simple post-process, the catalyst is reusable at least 6 times. This novel method offers a short reaction time, good yields, and environmentally benign characteristics.
- Ho, Wen-Yueh,Lin, Wesley,Lin, Yi-Jyun,Luo, Shun-Yuan,Pantawane, Amit,Su, Po-Fang,Thul, Mayur,Tseng, Shao-An,Wu, Hsin-Ru
-
-
- Copper pyrithione (CuPT)-catalyzed/mediated amination and thioarylation of (hetero)aryl halides: A competition
-
A facile method for the synthesis of N-arylheterocycles and di(hetero)aryl sulfides under mild condition is described. In these transformations, copper pyrithione (CuPT) was used as the copper catalyst for C─N coupling, while served as catalyst and coupled partner for C─S coupling with high yields and broad substrate tolerance. The S-arylation process was also utilized for the construction of valuable bioactive 2-sulfonylpyridine 1-oxide derivatives.
- Cao, Ningtao,Song, Bao,Xie, Jianwei,Zhang, Jie
-
-
- Synthesis and Physical Properties of Tunable Aryl Alkyl Ionic Liquids (TAAILs)
-
Tunable aryl alkyl ionic liquids (TAAILs) based on the imidazolium cation were first reported in 2009. Since then, a series of TAAILs with different properties due to the electron-donating or -withdrawing effect of the substituents at the aryl ring has be
- Lerch, Swantje,Strassner, Thomas
-
supporting information
p. 15554 - 15557
(2021/10/06)
-
- Nucleation of Tiny Silver Nanoparticles by Using a Tetrafacial Organic Molecular Barrel: Potential Use in Visible-Light-Triggered Photocatalysis
-
Coordination-driven self-assembly of discrete molecular architectures of diverse shapes and sizes has been well studied in the last three decades. Use of dynamic imine bonds for designing analogous metal-free architectures has become a growing challenge r
- Mondal, Bijnaneswar,Bhandari, Pallab,Mukherjee, Partha Sarathi
-
supporting information
p. 15007 - 15015
(2020/10/19)
-
- Facile synthesis of hydrochar supported copper nanocatalyst for Ullmann C–N coupling reaction in water
-
The exploration of inexpensive and stable heterogeneous catalysts and application of green solvents for Ullmann C–N coupling reaction remain challenging. We present a facile fabrication of copper nanoparticles on hydrochar as prepared from natural, inexpensive and renewable chitosan together with in-situ reduction of copper salt in a one-pot hydrothermal carbonization process. The copper nanoparticles were uniformly dispersed on hydrochar by choosing block copolymer F127 as surfactant. Moreover, maleic acid was introduced to improve the hydrophilicity of hydrochar. The most active copper nanocomposite catalyst, that is, Cu/HCS-MA-F127, exhibited excellent catalytic activity for Ullmann C–N coupling reaction in water. The nature of the Cu/HCS-MA-F127 was characterized by FTIR spectroscopy, TG, XRD, SEM and XPS. Moderate to excellent yields of aimed products were gained by using this catalytic strategy. Moreover, the Cu/HCS-MA-F127 catalyst can be reused by simple centrifugal recovery with a stable performance.
- Ge, Xin,Ge, Meng,Chen, Xinzhi,Qian, Chao,Liu, Xuemin,Zhou, Shaodong
-
-
- Copper quinolate: A simple and efficient catalytic complex for coupling reactions
-
We describe an effective and novel method to prepare N-aryl imidazoles via the copper quinolate-catalyzed N-arylation of aryl halides and imidazoles. A wide range of products were obtained in moderate to excellent yields under the optimal reaction conditions. Applying standard conditions, the model reaction could be performed on a gram scale. This method also presents a new avenue to the “click” reaction of terminal alkynes, benzyl bromide, and sodium azide and to the construction of C–C bonds by homocoupling of phenylboronic acid or phenylacetylene derivatives with the aid of copper quinolate.
- Wu, Fengtian,Li, Huiqin,Xie, Jianwei
-
-
- Imidazole-aryl coupling reaction via C[sbnd]H bond activation catalyzed by palladium supported on modified magnetic reduced graphene oxide in alkaline deep eutectic solvent
-
By employing reusable heterogeneous catalyst, modified magnetic reduced graphene oxide-supported palladium catalyst (MRGO@ DAP- AO-Pdll), the regioselective C-5 arylation of imidazoles via C[sbnd]H bond activation pathway for the preparation of
- Shariatipour, Monire,Salamatmanesh, Arefe,Jadidi Nejad, Masoumeh,Heydari, Akbar
-
-
- Change in the fluorescence of 1,1′-diaryl-2,2′-biimidazoles upon the addition of acid
-
The optical properties of a series of 1,1′-diaryl-2,2′-biimidazoles were examined. Different transitions were observed in their fluorescence spectra upon changing the electronic properties of the phenyl ring at the C1 and C1′ positions. The presence of a
- Akazome, Motohiro,Matsumoto, Shoji,Tachibana, Seigi
-
p. 1666 - 1677
(2020/10/22)
-
- N -Arylation of (hetero)arylamines using aryl sulfamates and carbamates via C-O bond activation enabled by a reusable and durable nickel(0) catalyst
-
An effective and general aryl amination protocol has been developed using a magnetically recoverable Ni(0) based nanocatalyst. This new stable catalyst was prepared on Fe3O4@SiO2 modified by EDTA and investigated by FT-IR, EDX, TEM, XRD, DLS, FE-SEM, XPS, NMR, TGA, VSM, ICP and elemental analysis techniques. The reaction proceeded via carbon-oxygen bond cleavage of (hetero)aryl carbamates and sulfamates under simple and mild conditions without the use of any external ligands. This method demonstrated functional group tolerance in the N-arylation of various nitrogen-containing compounds as well as aliphatic amines, anilines, pyrroles, pyrazoles, imidazoles, indoles, and indazoles with good to excellent yields. Furthermore, the catalyst could be easily recovered by using an external magnetic field and directly reused at least six times without notable reduction in its activity. This journal is
- Dindarloo Inaloo, Iman,Majnooni, Sahar,Eslahi, Hassan,Esmaeilpour, Mohsen
-
p. 13266 - 13278
(2020/10/07)
-
- L -(-) -Quebrachitol as a Ligand for Selective Copper(0)-Catalyzed N-Arylation of Nitrogen-Containing Heterocycles
-
l-(-)-Quebrachitol (QCT) has been found as a ligand of copper powder for selective N-arylation of nitrogen-containing heterocycles with aryl halides. Furthermore, another potential catalytic system (copper powder/QCT/t-BuOK) was successfully adapted to unactivated aryl chlorides.
- Zhou, Qifan,Du, Fangyu,Chen, Yuanguang,Fu, Yang,Sun, Wenjiao,Wu, Ying,Chen, Guoliang
-
p. 8160 - 8167
(2019/06/28)
-
- Cu2O/1-(2-methylhydrazine-1-carbonyl)-isoquinoline 2-oxide catalyzed C-N cross-coupling reaction in aqueous media
-
An experimentally simple, efficient, and inexpensive catalyst system was developed for the N-arylation of imidazole, indole, pyrrole, alkyl alcohol amines, and alkyl amines with aryl iodides and bromides. The reaction proceeds in water-ethanol media at 120 °C for 12 h with Cu2O as the catalyst, 1-(2-methylhydrazine-1-carbonyl)-isoquinoline 2-oxide (L2) as the ligand, NaOH as the base to generate a wide range of N-arylated products in moderate to excellent yields. Aqueous medium, ease of operation, and broad substrate scope give the process a benign environmental profile.
- Xie, Jian-Wei,Yao, Zhen-Bin,Wang, Xiao-Chuang,Zhang, Jie
-
p. 3788 - 3792
(2019/06/08)
-
- A designed bi-functional sugar-based surfactant: Micellar catalysis for C-X coupling reaction in water
-
A bi-functional sugar-based surfactant ALA14 was designed as the ligand and micelle constructor and demonstrated to promote the copper-catalyzed C-X coupling reaction in water. The nature of this micelle, formed by sugar-based surfactants, was investigated with CMC, DLS, and TEM, by which encapsulation and aggregation of the substrates in micelles were verified. Additionally, it was addressed by 1H-NMR analysis that the enrichment position of the substrates is in the lipophilic alkyl chain. Finally, moderate to excellent yields of the aimed products were obtained in this work. This remarkably simple strategy expanded the scope of C-X coupling reaction in water; most notably, both water and ALA14 can be recycled and reused.
- Ge, Xin,Zhang, Shihui,Chen, Xinzhi,Liu, Xuemin,Qian, Chao
-
supporting information
p. 2771 - 2776
(2019/06/13)
-
- N-arylation method in aqueous phase system with substituted quinoline or isoquinoyl hydrazide pyridine-N-oxide as ligand
-
The invention relates to an N-arylation method in an aqueous phase system with substituted quinoline or isoquinoyl hydrazide pyridine-N-oxide as a ligand. The N-arylation method in the aqueous phase system with the substituted quinoline or isoquinoyl hydrazide pyridine-N-oxide as the ligand comprises the following steps of: adding a catalyst, the ligand, a raw material, alkali, a phase transferring catalyst and a solvent into a reactor, heating and stirring, after the reaction is ended, separating and purifying a reaction solution to obtain an N-arylation product, wherein the raw material is aryl halide and a nitrogen-containing nucleophilic reagent, the solvent is a mixed solution of water and ethanol, and the catalyst is metal copper, or a copper oxide, or monovalent copper salt, or bivalent copper salt. The N-arylation method in the aqueous phase system with substituted quinoline or isoquinoyl hydrazide pyridine-N-oxide as the ligand has the characteristics of simplicity in operation, wide substrate application range, simplicity and easiness in separating products, high yield, economical process, environmental protection and the like.
- -
-
Paragraph 0050; 0051; 0052; 0053; 0055; 0056; 0057; 0058
(2019/03/28)
-
- A Newly Designed Carbohydrate-Derived Alkylamine Promotes Ullmann Type C-N Coupling Catalyzed by Copper in Water
-
A green and biodegradable carbohydrate-derived alkylamine was designed and employed as ligand for Ullmann type C-N coupling catalyzed by copper in water. The coupling of aryl iodide and N-nucleophiles were examined and moderate to excellent yields were obtained. In addition, the in-water coupling strategy was expanded successfully to the reaction of indoles with 4-iodoanisole. By measuring the solubility, it is speculated that carbohydrate-derived alkylamine plays the role of chelating copper and promoting the dissolution of 4-iodoanisole in water. Remarkably, this methodology was environmentally friendly and economical because of the use of aqueous media in place of organic solvents.
- Zhou, Guoquan,Chen, Wen,Zhang, Shihui,Liu, Xuemin,Yang, Zehui,Ge, Xin,Fan, Hua-Jun
-
supporting information
p. 193 - 198
(2019/01/14)
-
- Expanding the Electrochemical Window: New Tunable Aryl Alkyl Ionic Liquids (TAAILs) with Dicyanamide Anions
-
A set of new tunable aryl alkyl ionic liquids (TAAILs) based on the 1-aryl-3-alkyl imidazolium motif has been synthesized, in which the following variables were systematically changed: alkyl chain length, aryl substitution (group and position), and counte
- Lerch, Swantje,Strassner, Thomas
-
p. 16251 - 16256
(2019/11/22)
-
- Oxalic amide ligands, and uses thereof in copper-catalyzed coupling reaction of aryl halides
-
The present invention provides oxalic amide ligands and uses thereof in copper-catalyzed coupling reaction of aryl halides. Specifically, the present invention provides a use of a compound represented by formula I, wherein definitions of each group are described in the specification. The compound represented by formula I can be used as a ligand in copper-catalyzed coupling reaction of aryl halides for the formation of C—N, C—O and C—S bonds.
- -
-
Page/Page column 125-126
(2020/01/09)
-
- Functional 1,8-naphthyridine copper(I) complex as efficient catalyst for n-arylation of imidazoles coupling reactions
-
The functional 1,8-naphthyridine copper(I) complex, synthesized through a non-catalyst C(sp3)-H methylenation, catalyzes the cross-coupling reaction of aryl halides with imidazoles, by C?N bond formation. The Cu(I) complex catalyzes the reaction with a low catalyst loading (1%, molar fraction) and cheap base even under aerobic conditions. The procedure tolerates aryl halides with various functional groups (such as methyl, methoxy, acetyl, fluoro, nitrile and nitro groups) and gives the corresponding coupling products in moderate to high yields.
- Gou, Gao-Zhang,Wu, Na,Zhang, Ju-Cheng,Shi, Ling,Liu, Gui-Yang,Liu, Wei,Mang, Chao-Yong,Chi, Shao-Ming
-
p. 181 - 185
(2018/02/28)
-
- Efficient Ullmann C-X coupling reaction catalyzed by a recoverable functionalized-chitosan supported copper complex
-
Three different types of functionalized-CS were prepared and anchored with copper salts for use as the catalyst for the Ullmann C-X coupling reaction. The Schiff-basic chitosan supported copper complex (PCCS@CuI) exhibits the highest catalytic activity. The structure of the catalyst was characterized by FTIR spectroscopy, TG, XRD, SEM, EDS and XPS. This catalyst exhibited high applicability for the C-N and C-S coupling reactions, in which good to excellent yields were obtained. Its easy separation, good reusability and stability were notable.
- Liu, Xuemin,Chang, Shuo,Chen, Xinzhi,Ge, Xin,Qian, Chao
-
supporting information
p. 16013 - 16020
(2018/10/04)
-
- 2,6-Bis(2-methylhydrazine-1-carbonyl)pyridine 1-oxide as an Efficient Ligand for Copper-Catalyzed C–N Coupling Reaction in Water
-
Abstract: Cu2O/2,6-bis(2-methylhydrazine-1-carbonyl)pyridine 1-oxide was found to be an efficiently catalytic system for the N-arylation of imidazole, indole, benzimidazole, pyrrole, benzylamine and ethanolamine with aryl iodides and bromides by using NaOH as base in the presence of 20?mol% (n-Bu)4NBr, and water as solvent at 130?°C in 24?h, and giving the N-arylated products in moderate to excellent yields.
- Wang, Xiaochuang,Meng, Fei,Zhang, Jie,Xie, Jianwei,Dai, Bin
-
p. 1142 - 1149
(2018/02/22)
-
- Chan-Lam cross-coupling reaction based on the Cu2S/TMEDA system
-
A catalyst based on the readily available Cu2S/TMEDA system using a stable copper(I) source was developed for the Chan-Lam cross-coupling reaction. The capability of the catalyst was demonstrated with 1H-benzo[d]imidazol-2(3H)-one, 1H-benzo[d]imidazole, and 1H-imidazole together with electron-deficient, electron-rich, and sterically demanding boronic acids at room temperature in the presence of atmospheric oxygen to give the cross-coupling products in moderate to excellent yields. In addition, the coupling reaction of 1H-benzo[d]imidazole with several pinacol or neopentylglycol boronates indicated further potential of the catalyst. The reaction conditions tolerate the hydroxyl and bromo functional groups. The catalytic system also enables to synthesize the mono-N-substituted anilines from primary aliphatic amines. However, the two model compounds for the secondary and aromatic amines, piperidine and aniline, do not react. Two sterically demanding products with the restricted C–N bond rotation, synthesized by the N-arylation of 1H-benzo[d]imidazol-2(3H)-one with o-tolylboronic acid, enabled to confirm the atropisomers prepared by the Chan-Lam cross-coupling reaction. Furthermore, an example of one-pot Chan-Lam and Suzuki-Miyaura reaction has been reported.
- Janíková, Kate?ina,Jedinák, Luká?,Volná, Tereza,Canka?, Petr
-
p. 606 - 617
(2018/01/01)
-
- Copper(I)-USY as a Ligand-Free and Recyclable Catalyst for Ullmann-Type O-, N-, S-, and C-Arylation Reactions: Scope and Application to Total Synthesis
-
The copper(I)-doped zeolite CuI-USY proved to be a versatile, efficient, and recyclable catalyst for various Ullmann-type coupling reactions. Easy to prepare and cheap, this catalytic material enables the arylation and heteroarylation of diverse O-, N-, S-, and C-nucleophiles under ligand-free conditions while exhibiting large functional group compatibility. The facility of this catalyst to promote C-O bond formation was further demonstrated with the total synthesis of 3-methylobovatol, a naturally occurring diaryl ether of biological relevance. From a mechanistic viewpoint, two competitive pathways depending on the nature of the nucleophile and consistent with the obtained results have been proposed.
- Garnier, Tony,Danel, Mathieu,Magné, Valentin,Pujol, Anthony,Bénéteau, Valérie,Pale, Patrick,Chassaing, Stefan
-
p. 6408 - 6422
(2018/05/31)
-
- Glycosyl diamine as well as preparation method and application thereof
-
The invention discloses glycosyl diamine as well as a preparation method and application thereof. The glycosyl diamine is prepared by carrying out condensation reaction on unprotected glucose and alkyl diamine at the temperature from room temperature to 7
- -
-
Paragraph 0017
(2018/07/30)
-
- A waste-minimized protocol for copper-catalyzed Ullmann-type reaction in a biomass derived furfuryl alcohol/water azeotrope
-
We report the use of biomass-derived furfuryl alcohol as an effective bidentate ligand able to promote the Ullmann-type copper-catalyzed coupling of aryl halides with heteroaromatic or aliphatic amines. Furfuryl alcohol (FA) can be mixed with water to form the corresponding azeotrope (20 wt% of FA) and therefore can be easily recovered and reused. This protocol is efficiently applied to substrates with various electronic nature and affords the expected products (27 examples) in generally good to excellent yields. It has also been demonstrated that the protocol is both chemically and environmentally effective as the azeotropic mixture can be easily and almost quantitatively recovered at the end of the process.
- Ferlin, Francesco,Trombettoni, Valeria,Luciani, Lorenzo,Fusi, Soliver,Piermatti, Oriana,Santoro, Stefano,Vaccaro, Luigi
-
supporting information
p. 1634 - 1639
(2018/04/12)
-
- Copper(I) Oxide/N,N′-Bis[(2-furyl)methyl]oxalamide-Catalyzed Coupling of (Hetero)aryl Halides and Nitrogen Heterocycles at Low Catalytic Loading
-
An easily prepared oxalic diamide is a powerful ligand for the copper-catalyzed coupling of aryl halides with nitrogen heterocycles. Only 1–2 mol% each of copper(I) oxide and N,N′-bis[(2-furyl)methyl]oxalamide (BFMO) are needed to form N-arylation products under mild conditions. More than 10 different types of nitrogen heterocycles are compatible with these conditions, thereby giving the corresponding N-arylation products. (Figure presented.).
- Pawar, Govind Goroba,Wu, Haibo,De, Subhadip,Ma, Dawei
-
supporting information
p. 1631 - 1636
(2017/05/22)
-
- Intermolecular Aryl C?H Amination through Sequential Iron and Copper Catalysis
-
A mild, efficient and regioselective method for para-amination of activated arenes has been developed through a combination of iron and copper catalysis. A diverse range of products were obtained from an operationally simple one-pot, two-step procedure involving bromination of the aryl substrate with the powerful Lewis acid iron(III) triflimide, followed by a copper(I)-catalysed N-arylation reaction. This two-step dehydrogenative process for the regioselective coupling of aromatic C?H bonds with non-activated amines was applicable to anisole-, phenol-, aniline- and acetanilide-type aryl compounds. Importantly, the arene substrates were used as the limiting reagent and required no protecting-group manipulations during the transformation.
- Mostafa, Mohamed A. B.,Calder, Ewen D. D.,Racys, Daugirdas T.,Sutherland, Andrew
-
supporting information
p. 1044 - 1047
(2017/02/05)
-
- Cu2O/Cs2CO3/DMF: An efficient catalytic system for N-arylation of imidazole with aryl halides under ligand-free conditions
-
A ligand-free Cu-catalyzed protocol for the Ullmann-type N-arylation of N-containing heterocycles with aryl or heteroaryl iodides and bromides has been established. A broad range of functional groups is well tolerated on both of the cross-coupling partners, producing the desired products in good to excellent yields.
- Wang, Xiaochuang,Wang, Meiji,Xie, Jianwei
-
supporting information
p. 1797 - 1803
(2017/09/22)
-
- Carbothioamide as Highly Efficient Ligand for Copper-catalyzed Room Temperature Chan–Lam Cross-Coupling Reaction
-
The catalytic activity of three N,S-donor ligands, viz L1 [2-(4-methoxybenzylidene)-N-phenylhydrazinecarbothioamide], L2 [2,2′-(1,2-diphenylethane-1,2-diylidene)bis(hydrazinecarbothioamide)] and L3 [2-(4-methoxybenzylidene)hydrazinecarbothioamide] has been reported for N-arylation of imidazoles with arylboronic acids in ethanol at room temperature. The method was found to be applicable in N-arylation for a wide range of electronically diverse arylboronic acids with imidazoles having modest to excellent isolated yields. The in situ generated copper(II) complex of the ligand namely, 2-(4-methoxybenzylidene)-N-phenylhydrazinecarbothioamide (L1) was found to be highly efficient homogeneous catalyst for N-arylation reaction.
- Baruah, Jayantajit,Gogoi, Kongkona,Dewan, Anindita,Borah, Geetika,Bora, Utpal
-
p. 1203 - 1208
(2017/10/25)
-
- Chan-Lam-Type C-N Cross-Coupling Reactions under Base- and Ligand-Free CuI-Zeolite Catalysis
-
Various representative copper(I)-exchanged zeolites were investigated for their catalytic potential in Chan-Lam cross-coupling reactions. CuI-USY appeared as the best catalyst and proved to efficiently promote C-N cross-coupling processes under attractive, simple, and practical conditions, namely refluxing in methanol under air and without any base.
- Garnier, Tony,Sakly, Randa,Danel, Mathieu,Chassaing, Stefan,Pale, Patrick
-
supporting information
p. 1223 - 1230
(2017/03/11)
-
- A N - aryl pyrazole compounds and N - aryl imidazole compound of preparation method
-
The invention discloses a preparation method of an N-arylpyrazole compound and an N-arylimidazole compound. The method comprises the following steps: reacting at 20-120 DEG C for 6-48 hours by taking aryl halide and pyrazole or imidazole as substrates and copper salt as a catalyst in an organic solvent in the presence of alkali and a nitrogenous ligand under nitrogen protection; and after the reaction is finished, separating and purifying a reaction liquid to obtain the N-arylpyrazole compound or the N-arylimidazole compound. A product prepared by utilizing the method disclosed by the invention can not only be directly used, but also be used for other reactions as a substrate and has the advantages of moderation in adopted reaction condition, simple operation step and post-processing process, high yield and suitability for large-scale production.
- -
-
Paragraph 0087-0090; 0127-0132
(2017/10/05)
-