1655-69-2Relevant articles and documents
New access to cross-coupling reaction between arylsilanes or heteroarylsilanes and aryl halides mediated by a copper(I) salt
Ito, Hajime,Sensui, Hiro-Omi,Arimoto, Kikuo,Miura, Katsukiyo,Hosomi, Akira
, p. 639 - 640 (1997)
Copper(I) salt can be used as a promoter for the cross-coupling reactions between aryl- or heteroarylsilanes and aryl halides without a fluoride ion. Under these mild conditions, even a substrate containing a fluoride ion-sensitive silyloxyl group was employed directly.
Ullmann-type coupling reaction using metal-organic framework MOF-199 as an efficient recyclable solid catalyst
Phan, Nam T.S.,Nguyen, Tung T.,Nguyen, Chi V.,Nguyen, Thao T.
, p. 69 - 77 (2013)
A highly porous metal-organic framework (MOF-199) was synthesized, and characterized by several methods including XRD, SEM, TEM, TGA, FT-IR, AAS, and nitrogen physisorption measurements. The MOF-199 was used as an efficient recyclable solid catalyst for the Ullmann-type reaction between aryl iodides and phenols to form diaryl ethers. High conversions were achieved for the transformation at the catalyst concentration of 5 mol%, in the presence of MeONa as a base. Due to the rare availability and the high cost, Cs 2CO3 should only be used for the case of deactivated aryl iodides or deactivated phenols. The MOF-199 catalyst could be facilely separated from the reaction mixture by simple filtration, and could be reused several times without a significant degradation in catalytic activity. The Ullmann-type reaction could only proceed in the presence of the solid MOF-199 catalyst, and the contribution from leached active species in the liquid phase, if any, was negligible.
Light-Assisted Ullmann Coupling of Phenols and Aryl Halides: The Synergetic Effect Between Plasmonic Copper Nanoparticles and Carbon Nanotubes from Various Sources
Ji, Rongrong,Jie, Xiangyu,Zhou, Yiwei,Wang, Yuanhui,Li, Bing,Liu, Xuguang,Zhao, Jian
, (2022/01/19)
Utilizing light and plastic wastes as resources to turn the wasted phenols and hazardous aryl halides into value added chemicals seems to be an attractive idea for alleviating the energy crisis and environmental problems. In this work, plasmonic copper nanoparticles (Cu NPs) were loaded onto carbon nanotubes (CNTs) from various sources including commercial CNTs and those derived from plastic wastes. Under visible-light irradiation, the catalyst could efficiently convert phenols and aryl halides to diaryl ethers. Similar with commercial CNTs, excellent activity is also achieved when utilizing CNTs derived from different kinds of plastic wastes as support for the system. Further investigation shows that the visible-light irradiation and light-excited plasmonic Cu NPs are necessary to inhibit the phenol degradation on CNTs and in turn promote the cross-coupling of phenol and aryl halides. Compared with metal oxides and other carbon materials, the excellent capability of CNTs to absorb light, to convert light to heat, and to adsorb both two reactants simultaneously are critical to enhance the activity of Cu NPs, achieving high yields of diaryl ethers. This study could provide a novel strategy for catalyst design and generate a more economically sustainable process.
Synthesis and characterization of nano-cellulose immobilized phenanthroline-copper (I) complex as a recyclable and efficient catalyst for preparation of diaryl ethers, N-aryl amides and N-aryl heterocycles
Aghili, Nora,Hosseinzadeh, Rahman,Mavvaji, Mohammad
, (2022/01/03)
Functionalized nanocellulose was prepared and employed for immobilization of phenanthroline-copper(I) complex to afford cellulose nanofibril grafted heterogeneous copper catalyst [CNF-phen-Cu(I)]. This nanocatalyst was well characterized using FT-IR, NMR, XRD, CHNS, AAS, TGA, EDX and SEM. The activities of the synthesized catalyst were examined in the synthesis of diaryl ethers via C-O cross-coupling of phenols and aryl iodides, as well as, the preparation of N-aryl amides and N-aryl heterocycles through C-N cross-coupling of amides and N-H heterocycle compounds with aryl halides. In this trend, various substrates containing electron-donating and electron-withdrawing groups were exploited to evaluate the generality of this catalytic protocol. Accordingly, the catalyst demonstrated remarkable catalytic efficiency for both C-N and C-O cross-coupling reactions, thereby resulting in good to excellent yields of the desired products. Furthermore, the recoverability experiments of the catalyst showed that it can be readily retrieved by simple filtration and successfully reused several times with negligible loss of its catalytic activity.
Functionalization of graphene oxide with a hybrid P, N ligand for immobilizing and stabilizing economical and non-toxic nanosized CuO: an efficient, robust and reusable catalyst for the C-O coupling reaction in O-arylation of phenol
Arora, Aayushi,Kumar, Arun,Kumar, Sushil,Nautiyal, Divyanshu,Oswal, Preeti,Singh, Siddhant
, p. 3578 - 3587 (2022/03/08)
Herein, we report a promising graphene oxide (GO) anchored robust and thermally stable heterogeneous catalytic system containing the low cost and less toxic copper oxide as a catalytically active material for C-O coupling reactions. A hybrid ligand (i.e. PPh2-CH2-CH2-NH2) has been used for the first time for functionalization of the GO surface. This ligand grafted over GO sheets via covalent linkages acts as an efficient stabilizing and chelating agent for CuO nanoparticles through P and N donor sites to form the catalytic system (GO-PN-CuO). The powder X-ray diffraction (PXRD), infrared (IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), Brunauer-Emmett-Teller (BET) studies, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM) and Raman spectroscopy confirmed the step-wise formation of GO-PN-CuO. The catalytic potential of GO-PN-CuO has been explored for the C-O coupling reactions of phenols with several aryl bromides and chlorides under mild reaction conditions. The covalent linkage of the hybrid ligand with GO sheets and the strong binding abilities of P, N donor sites with CuO render high stability to GO-PN-CuO. As a result, the catalytic system offers the advantage of recyclability up to five reaction cycles without any considerable loss in activity.
Ligand- and Counterion-Assisted Phenol O-Arylation with TMP-Iodonium(III) Acetates
Kikushima, Kotaro,Miyamoto, Naoki,Watanabe, Kazuma,Koseki, Daichi,Kita, Yasuyuki,Dohi, Toshifumi
supporting information, p. 1924 - 1928 (2022/03/27)
High reactivity of trimethoxyphenyl (TMP)-iodonium(III) acetate for phenol O-arylation was achieved. It was first determined that the TMP ligand and acetate anion cooperatively enhance the electrophilic reactivity toward phenol oxygen atoms. The proposed method provides access to various diaryl ethers in significantly higher yields than the previously reported techniques. Various functional groups, including aliphatic alcohol, boronic ester, and sterically hindered groups, were tolerated during O-arylation, verifying the applicability of this ligand- and counterion-assisted strategy.
Preparation method of nitrogen-alkyl (deuterated alkyl) aromatic heterocycle and alkyl (deuterated alkyl) aryl ether compound
-
Paragraph 0072-0074, (2021/04/03)
The invention provides a method for preparing nitrogen-alkyl(deuterated alkyl)aromatic heterocycle and alkyl(deuterated alkyl)aryl ether compounds. The method adopted in the invention specifically comprises the following steps: firstly, adding an alkoxy base (MOR') or a combination reagent Q (comprising a base M'X, an alcohol C and a molecular sieve E) into a solvent B to be stirred; then, addingan aromatic compound D of nitrogen sulfonyl or oxygen sulfonyl into a mixture; separating and purifying after reaction to obtain nitrogen-alkyl(deuterated alkyl)aromatic heterocycle or alkyl(deuterated alkyl)aryl ether. The method can realize one-step conversion from an electron withdrawing benzenesulfonyl protecting group on a nitrogen or oxygen atom to an electron donating alkyl protecting group, avoids using highly toxic alkyl halide, and has advantages of being efficient, economical, environmentally friendly, mild in condition, good in substrate universality and high in yield; the prepareddeuterated compounds can be widely applied to the fields of pharmaceutical chemistry and organic chemistry synthesis.
Ligand compound for copper catalyzed aryl halide coupling reaction, catalytic system and coupling reaction
-
Paragraph 0122-0133, (2021/05/29)
The invention provides a ligand compound capable of being used for copper catalyzed aryl halide coupling reaction, the ligand compound is a three-class compound containing a 2-(substituted or non-substituted) aminopyridine nitrogen-oxygen group, and the invention also provides a catalytic system for the aryl halide coupling reaction. Thecatalytic system comprises a copper catalyst, a compound containing a 2-(substituted or non-substituted) aminopyridine nitrogen-oxygen group adopted as a ligand, alkali and a solvent, and meanwhile, the invention also provides a system for the aryl halide coupling reaction adopting the catalyst system. The compound containing the 2-(substituted or non-substituted) aminopyridine nitrogen oxygen group can be used as the ligand for the copper catalyzed aryl chloride coupling reaction, and the ligand is stable under a strong alkaline condition and can well maintain catalytic activity when being used for the copper-catalyzed aryl chloride coupling reaction. In addition, the copper catalyst adopting the compound as the ligand can particularly effectively promote coupling of copper catalyzed aryl chloride and various nucleophilic reagents which are difficult to generate under conventional conditions, C-N, C-O and C-S bonds are generated, and numerous useful small molecule compounds are synthesized. Therefore, the aryl halide coupling reaction has a very good large-scale application prospect by adopting the copper catalysis system of the ligand.
Copper nanoparticle anchored biguanidine-modified Zr-UiO-66 MOFs: a competent heterogeneous and reusable nanocatalyst in Buchwald-Hartwig and Ullmann type coupling reactions
Veisi, Hojat,Neyestani, Narges,Pirhayati, Mozhgan,Ahany Kamangar, Sheida,Lotfi, Shahram,Tamoradi, Taiebeh,Karmakar, Bikash
, p. 22278 - 22286 (2021/07/02)
We have designed a functionalized metal-organic framework (MOF) of UiO topology as a support, with an extremely high surface area, adjustable pore sizes and stable crystalline coordination polymeric structure and implanted copper (Cu) nanoparticles thereon. The core three dimensional Zr-derived MOF (UiO-66-NH2) was modified with a biguanidine moiety following a covalent post-functionalization approach. The morphological and physicochemical features of the material were determined using analytical methods such as FT-IR, SEM, TEM, EDX, atomic mapping, XRD and ICP-OES. The SEM and XRD results justified the unaffected morphology of Zr-MOF after structural modifications. The as-synthesized UiO-66-biguanidine/Cu nanocomposite was catalytically explored in the aryl and heteroaryl Buchwald-Hartwig C-N and Ullmann type C-O cross coupling reactions with excellent yields. A library of biaryl amine and biaryl ethers was synthesized over the catalyst under mild and green conditions. Furthermore, the catalyst was isolated by centrifugation and recycled 11 times with no significant copper leaching or change in its activity.
Synergistic effect of copper nanocrystals-nanoparticles incorporated in a porous organic polymer for the Ullmann C-O coupling r–eaction
Gorginpour, Forough,Zali-Boeini, Hassan
, (2021/02/22)
A quinoxaline-based porous organic polymer (Q-POP) as a mesoporous organic copolymer was developed as a new platform for the immobilization of CuNPs and copper nanocrystals. The prepared materials were characterized by FT-IR, XRD, N2 adsorption-desorption isotherms, ICP, TGA, SEM, HR-TEM, EDX, and single-crystal X-ray crystallography. The obtained catalyst presented extraordinary catalytic activity towards Ullmann C–O coupling reactions with high surface area, hierarchical porosity, and excellent thermal and chemical stability. Due to its high porosity, and synergistic effect of copper nanocrystals incorporated in the polymer composite, the as-synthesized catalyst was successfully utilized for the Ullmann C–O coupling reaction of phenols and different aryl halides to prepare various diaryl ether derivatives. All types of aryl halides (except aryl fluorides) were screened in the Ullmann C–O coupling reaction with phenols to produce diaryl ethers in good to excellent yields (70–97 %), and it was found that aryl iodides have the best results. Besides, due to the strong interactions between CuNPs, N, and O-atoms of quinoxaline moiety existing in the polymeric framework, the copper leaching from the support was not observed. Furthermore, the catalyst was recycled and reused for five consecutive runs without significant activity loss.
