91-10-1Relevant articles and documents
Wildenhain,Henseke
, p. 479 (1969)
One-Pot Transformation of Lignin and Lignin Model Compounds into Benzimidazoles
Guo, Tao,He, Jianghua,Liu, Tianwei,Zhang, Yuetao
supporting information, (2022/02/07)
It is a challenging task to simultaneously achieve selective depolymerization and valorization of lignin due to their complex structure and relatively stable bonds. We herein report an efficient depolymerization strategy that employs 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) as oxidant/catalyst to selectively convert different oxidized lignin models to a wide variety of 2-phenylbenzimidazole-based compounds in up to 94 % yields, by reacting with o-phenylenediamines with varied substituents. This method could take full advantage of both Cβ and/or Cγ atom in lignin structure to furnish the desirable products instead of forming byproducts, thus exhibiting high atom economy. Furthermore, this strategy can effectively transform both the oxidized hardwood (birch) and softwood (pine) lignin into the corresponding degradation products in up to 45 wt% and 30 wt%, respectively. Through a “one-pot” process, we have successfully realized the oxidation/depolymerization/valorization of natural birch lignin at the same time and produced the benzimidazole derivatives in up to 67 wt% total yields.
Thio-assisted reductive electrolytic cleavage of lignin β-O-4 models and authentic lignin
Fang, Zhen,Flynn, Michael G.,Jackson, James E.,Hegg, Eric L.
supporting information, p. 412 - 421 (2021/01/28)
Avoiding the use of expensive catalysts and harsh conditions such as elevated temperatures and high pressures is a critical goal in lignin depolymerization and valorization. In this study, we present a thio-assisted electrocatalytic reductive approach using inexpensive reticulated vitreous carbon (RVC) as the working cathode to cleave the β-O-4-type linkages in keto aryl ethers. In the presence of a pre-electrolyzed disulfide (2,2′-dithiodiethanol) and a radical inhibitor (BHT) at room temperature at a current density of 2.5 mA cm-2, cathodic reduction of nonphenolic β-O-4 dimers afforded over 90% of the corresponding monomeric C-O cleavage products in only 1.5 h. Extended to DDQ-oxidized poplar lignin, this combination of electric current and disulfide, applied over 6 h, released 36 wt% of ethyl acetate soluble fragments and 26 wt% of aqueous soluble fragments, leaving only 38 wt% of insoluble residue. These findings represent a significant improvement over the current alone values (24 wt% ethyl acetate soluble; 22 wt% aqueous soluble; 54 wt% insoluble residue) and represent an important next step in our efforts to develop a mild electrochemical method for reductive lignin deconstruction.
The graphite-catalyzed: ipso -functionalization of arylboronic acids in an aqueous medium: metal-free access to phenols, anilines, nitroarenes, and haloarenes
Badgoti, Ranveer Singh,Dandia, Anshu,Parewa, Vijay,Rathore, Kuldeep S.,Saini, Pratibha,Sharma, Ruchi
, p. 18040 - 18049 (2021/05/29)
An efficient, metal-free, and sustainable strategy has been described for the ipso-functionalization of phenylboronic acids using air as an oxidant in an aqueous medium. A range of carbon materials has been tested as carbocatalysts. To our surprise, graphite was found to be the best catalyst in terms of the turnover frequency. A broad range of valuable substituted aromatic compounds, i.e., phenols, anilines, nitroarenes, and haloarenes, has been prepared via the functionalization of the C-B bond into C-N, C-O, and many other C-X bonds. The vital role of the aromatic π-conjugation system of graphite in this protocol has been established and was observed via numerous analytic techniques. The heterogeneous nature of graphite facilitates the high recyclability of the carbocatalyst. This effective and easy system provides a multipurpose approach for the production of valuable substituted aromatic compounds without using any metals, ligands, bases, or harsh oxidants.
