β-Pyrazino-fused tetrarylporphyrins

Article abstract of DOI:10.1016/j.dyepig.2013.04.024

A novel method for the preparation of β-fused porphyrin dyads was developed that exploits a one-pot reaction of 2,3-diaminoporphyrins with diethyl oxalate. This approach provides good yields of the zinc β-fused dyad and the corresponding free-base, openin

Full text of DOI:10.1016/j.dyepig.2013.04.024

Accepted Manuscript
#-Pyrazino-fused tetrarylporphyrins
Federica Mandoj, Sara Nardis, Rajesh Pudi, Larisa Lvova, Frank R. Fronczek, Kevin
M. Smith, Luca Prodi, Damiano Genovese, Roberto Paolesse
PII:
S0143-7208(13)00151-4
10.1016/j.dyepig.2013.04.024
DYPI 3923
DOI:
Reference:
To appear in: Dyes and Pigments
Received Date: 29 January 2013
Revised Date: 17 April 2013
Accepted Date: 18 April 2013
Please cite this article as: Mandoj F, Nardis S, Pudi R, Lvova L, Fronczek FR, Smith KM, Prodi L,
Genovese D, Paolesse R, #-Pyrazino-fused tetrarylporphyrins, Dyes and Pigments (2013), doi: 10.1016/
j.dyepig.2013.04.024.
This is a PDF file of an unedited manuscript that has been accepted for publication. As a service to
our customers we are providing this early version of the manuscript. The manuscript will undergo
copyediting, typesetting, and review of the resulting proof before it is published in its final form. Please
note that during the production process errors may be discovered which could affect the content, and all
legal disclaimers that apply to the journal pertain.

*Highlights (for review)
ACCEPTED MANUSCRIPT
Highlights




Synthetic route to a -fused pyrazino porphyrin dyad.
The free base and metal derivatives of the new dyad were prepared.
The X-ray crystal structure of the Zn complex of the dyad was determined.
Photophysical characterization of the Zn complex of the dyad.

*Manuscript
Click here to view linked References
ACCEPTED MANUSCRIPT
-Pyrazino-fused tetrarylporphyrins
1
2
3
4
5
6
7
Federica Mandoj,a* Sara Nardis,a Rajesh Pudi,a Larisa Lvova,a Frank R. Fronczek, b Kevin M.
Smith,b Luca Prodi,c Damiano Genovese,c and Roberto Paolessea,d
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
a) Dipartimento di Scienze e Tecnologie Chimiche, Università di Roma Tor Vergata, via della
Ricerca Scientifica, 1, 00133 Rome, Italy
b) Department of Chemistry, Louisiana State University, Baton Rouge, Louisiana 70803 USA.
c) Department of Chemistry "G. Ciamician", Università di Bologna, 40126 Bologna, Italy
d) CNR IDASC, via Fosso del Cavaliere, 00133 Rome, Italy

ACCEPTED MANUSCRIPT
ABSTRACT
1
2
3
4
5
6
7
8
9
A novel method for the preparation of -fused porphyrin dyads was developed that exploits a one-
pot reaction of 2,3-diaminoporphyrins with diethyl oxalate. This approach provides good yields of
the zinc -fused dyad and the corresponding free-base, opening the way for preparation of several
metal derivatives to permit modulation of optoelectronic characteristics for commercial
applications.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65

ACCEPTED MANUSCRIPT
1. Introduction
1
2
In the last decade great attention has been focused on the preparation of porphyrin
derivatives characterized by an expanded aromatic system, because these molecules show novel
optical and electronic properties, making them particularly interesting for potential applications in
fields [1] ranging from PDT to chemical sensors, and especially in dye-sensitized solar cells (DSSC)
[2]. In fact, the extension of the porphyrin core aromaticity causes a decrease in the HOMO-LUMO
gap that leads to improved harvesting of solar energy in a broad spectral region. Recently, Yella et
al. reported the highest power conversion efficiency of 12.3% in DSSCs by the combination of a
new cobalt electrolyte with a porphyrin sensitizer [3]. However, the absorption wavelength values
of the porphyrin dye did not reach the near IR region and the existence of a gap between the Soret
and Q bands in monomeric porphyrins limits their cell performance. The more successful way to
overcome this limit is to connect more porphyrin dyes through their meso and beta peripheral
positions [4]. Different approaches have been followed to reach this goal, such as for example the
preparation of expanded porphyrinoids [5], where the aromatic system spans over a macrocycle
larger than that of porphyrins. Another approach is to synthesize polymeric species, where the
porphyrin units are linked by bridges, such as for example ethynes that allow macrocyclic
conjugation [6].
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
Recently, a route based on the fusion of other aromatic segments, including additional
porphyrin units at the peripheral position of the macrocycle, has been described [7]. Within this
scenario, we have been interested in the preparation of dyads and triads of porphyrins directly fused
at their peripheral positions, which show novel optical features, particularly promising for
optoelectronic applications [6, 8]. For these -fused systems, most of the synthetic procedures
generally involve several reaction steps or laborious preparation of the starting materials, such as
sulfoleno-substrates or pyrrole-porphyrin derivatives [9]. Taking into account these considerations,
our work has been focused on the exploration of novel and straightforward synthetic approaches for
the fusion of porphyrinoid macrocycles through their beta pheripheral positions, with the aim to

ACCEPTED MANUSCRIPT
open simple routes to hybrid arrays, where two different macrocycles are fused at the peripheral
1
2
3
4
5
positions, since such heterodyads could be of interest for optoelectronic applications.
2. Experimental section
6
7
8
2.1 General information
9
Reagents and solvents (Aldrich, Fluka) were of the highest grade available and were used without
further purification. Silica gel 60 (70–230 mesh, Sigma Aldrich) was used for column
chromatography. Tetrabutylammonium perchlorate (TBAClO4, Fluka) supporting electrolytes and
decamethylferrocene (Me10Fc, Aldrich) were used as electrochemical probes in cyclic voltammetry
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
1
(CV) measurements. H NMR spectra were recorded on a Bruker AV300 (300 MHz) spectrometer
and chemical shifts were reported as the delta scale in ppm relative to CHCl3 (7.25 ppm). UV-vis
spectra were recorded on a Cary 50 spectrophotometer. Mass spectra (FAB mode) were recorded on
a VGQuattro spectrometer in the positive-ion mode using m-nitrobenzyl alcohol (Aldrich) as a
matrix. Electronic spectra were measured in chloroform using a Perkin Elmer lambda 40
spectrophotometer. Corrected emission and excitation spectra (450 W Xe lamp) and excited state
lifetimes were obtained with a modular UV-VIS-NIR spectrofluorimeter Edinbourg, equipped with
a single photon-counting apparatus. Corrections for instrumental response, inner filter effects and
2+
phototube sensitivity were performed [10]. Ru(bpy)3 in aerated H2O ( = 0.028) was used as a
standard for florescence quantum yields. Emission spectra in a rigid, transparent 2-
methylcyclohexane matrix at 77 K were recorded using quartz tubes immersed in a quartz Dewar
filled with liquid N2. A correction for a difference in the refraction index was introduced when
necessary. The CV measurements were carried out at 298 K using PalmSens PS-Trace handheld
potentiostat (Palm Instruments, Netherlands) in the standard three-electrode cell with platinum
button (2 mm diameter) working electrode, Pt wire (0.5 mm diameter, 3 cm length) counter
electrode and Saturated Calomel reference electrode (SCE, AMEL, Italy). The 1 mM solutions of
4a and ZnTPP in CH2Cl2 containing 0.1 M of TBAClO4 supporting electrolyte were analyzed in the
potential ranges from 0 to -2 V (reduction processes) and from 0 to 1.6 V (oxidation processes) with

ACCEPTED MANUSCRIPT
a scan rate of 0.1V/s. Before the measurements, system was calibrated with 1 mM Me10Fc probe
1
2
3
(E1/2=-0.063 V).
4
5
2.2. Synthetic details and characterization
6
7
8
9
Porphyrin 1 has been prepared following the reaction pathway reported in Scheme 1, according to
literature methods [11, 12].
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
2.2.1. Synthesis of 4a by condensation with 3
A solution of the porphyrin 1 (100 mg, 0.142 mmol) and palladium on activated carbon 10% wt
(150 mg) in a mixture of dichloromethane and methanol (50 mL and 5 mL) was degassed with N2
for 10 min. Sodium borohydride (133 mg, 3.5 mmol) was added and the solution was stirred under
nitrogen, at room temperature. The progress of the reaction was followed by TLC analysis and UV-
vis spectroscopy and after 2 h the mixture was filtered through a plug of Celite. The solvent was
evaporated and the crude residue was dissolved in a mixture of dichloromethane, ethanol and acetic
acid (10 mL, 10 mL and 2 mL); 1 equiv. of 3 (100 mg, 0.142 mmol) was added and the solution
was heated to reflux for 3 h. After evaporation of the solvent, the crude product was purified on a
short column of silica gel eluting with dichloromethane. The first fraction was collected and
crystallized from dichloromethane/methanol affording the bis-porphyrin 4a as a dark red powder
(38 mg, 0.028 mmol; 20 %).
2.2.2. Synthesis of 4a by condensation with diethyl oxalate
A solution of the porphyrin 1 (100 mg, 0.142 mmol) and palladium on activated carbon 10% wt
(150 mg) in a mixture of dichloromethane and methanol (50 mL and 5 mL) was degassed with N2
for 10 min. Sodium borohydride (133 mg, 3.5 mmol) was added and the solution was stirred under
nitrogen, at room temperature. The progress of the reaction was followed by TLC analysis and UV-
vis spectroscopy and after 2 h the mixture was filtered through a plug of Celite using
dichloromethane (50 mL). Diethyl oxalate (474 L, 3.5 mmol) diluted in methanol (5 mL) was

ACCEPTED MANUSCRIPT
added to the filtered solution and the mixture was heated at reflux for 6 h and then left stirring to
1
2
3
4
5
6
7
8
9
room temperature overnight. After evaporation of the solvent, the crude product was purified on a
short column of silica gel eluting with dichloromethane. The first red fraction was collected and
crystallized from dichloromethane/methanol affording the bis-porphyrin 4a as a dark red powder
(41 mg, 0.030 mmol; 42%).
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
UV-vis (CH2Cl2): max, (log ) 402 (4.92), 492 (5.06), 592 (4.61) nm. 1H NMR (300 MHz, CDCl3):
 8.88 (d, 2H, J = 4.74 Hz, β-pyrrole), 8.87 (s, 2H, β-pyrrole), 8.64 (d, 2H, J = 4.83 Hz, β-pyrrole),
8.23 (m, 4H, phenyls), 7.79 (m, 10H, phenyls), 7.54 (m, 6H, phenyls) ppm. Anal. Calcd for
C88H52N10Zn2: C, 76.6; H, 3.8; N, 10.1. Found: C, 76.5; H, 3.6; N, 10.9%. MS (FAB): m/z 1380
(M+).
Crystallographic data were collected using MoKα radiation (=0.71073 Å) at T = 90K on a Nonius
.
.
KappaCCD diffractometer. Crystal data: C90H60O2Zn2 2(CH3OH) 4(CH2Cl2), Mr = 1848.01,
triclinic space group P-1, a = 8.858(3), b = 13.756(4), c = 18.320(7) Å,  = 74.461(14),  =
80.523(15),  = 78.378(18)º, V = 2092.1(12) Å3, Z = 1, Dx = 1.467 g cm−3, max = 26.1°, R = 0.054
for 7548 data (4979 with I>2(I)) and 548 refined parameters, CCDC 908512.
2.2.3. Synthesis of 4b by demetalation
To a chloroform solution (70 mL) of 4a (50 mg, 0.036 mmol) was added trifluoracetic acid (TFA)
(ca. 200 L). The mixture was stirred at room temperature for 30 min, following the progress of the
demetalation by TLC analysis and UV-vis spectroscopy. The resulting mixture was neutralized with
saturated aqueous NaHCO3 and extracted with chloroform; the organic phase was washed with
water and dried over anhydrous Na2SO4. The product was directly crystallized from
dichloromethane/methanol affording 4b (43 mg, 0.034 mmol) in 94% yield.
UV-vis (CH2Cl2): max, (log ) 412 (4.27), 489 (4.56), 538 (sh), 614 (sh) nm. 1H NMR (300 MHz,
CDCl3):  8.80 (d, 2H, J = 4.41 Hz, β-pyrrole), 8.76 (d, 2H, J = 4.74 Hz, β-pyrrole), 8.67 (s, 2H, β-

ACCEPTED MANUSCRIPT
pyrrole), 8.28 (m, 4H, phenyls), 7.95 (m, 3H, phenyls), 7.81 (m, 7H, phenyls), 7.62 (m, 6H,
1
2
3
4
5
phenyls), -2.17 (brs, NH) ppm. Anal. Calcd for C88H56N10: C, 84.3; H, 4.5; N, 11.2. Found: C, 84.5;
H, 4.4; N, 11.1%. MS (FAB): m/z 1254 (M+).
6
7
8
9
2.2.4. Synthesis of 4c
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
Bis-porphyrin 4b (40 mg, 0.032 mmol) was dissolved in chloroform (50 mL) and an excess of a
saturated solution of Cu(OAc)2 • H2O in methanol was added. The resulting solution was heated
under reflux for 2 h. The completion of metalation was verified by TLC analysis and UV-vis
spectroscopy. After cooling, the solvent was evaporated and the product was directly crystallized
from dichloromethane/methanol affording 4c as a green powder (35 mg, 0.026 mmol), in 81% yield.
UV-vis (CHCl3): max, nm (log ) 402 (4.36), 492 (4.53), 594 (4.09) nm. Anal. Calcd for
C88H52N10Cu2: C, 76.8; H, 3.8; N, 10.2. Found: C, 77.1; H, 3.4; N, 10.4%. MS (FAB): m/z 1375
(M+).
3. Result and Discussion
During our search of simple synthetic routes for the preparation of hetero--fused systems,
we decided to investigate the preparation of a novel -fused bis-porphyrin, characterized by having
a pyrazine unit in the linker. Following the common acid catalyzed route to condense aromatic o-
diamines with vicinal diketones [13], the zinc -dione porphyrin derivative 3 [14] was reacted with
the 2,3-diaminoporphyrin zinc complex 2. Porphyrin 1 (Scheme 1) was synthesized and isolated
according to literature procedures [11, 12] and subsequently reduced with NaBH4, in the presence of
Pd/C 10% wt, under nitrogen in a CH2Cl2/MeOH (10:1) solution. Complete reduction was verified
by UV-Vis spectroscopy and TLC and, after 2 hours, the resulting solution of 2 was passed through
a pad of Celite to remove the catalyst and hydride excess. After evaporation of the solvent, 2 was
dissolved in CH2Cl2 and directly added to a solution of 3 in CH2Cl2/EtOH/HOAc (5:5:1) and the
mixture was heated at reflux for 3 hours; purification of the resulting crude product on a silica gel
column, eluting with CH2Cl2, afforded the bis-porphyrin 4a as a single product, in 20% yield.

ACCEPTED MANUSCRIPT
<Please insert here Scheme 1>
1
2
3
4
5
Scheme 1. Synthesis of 4a by condensation of 2,3-diaminoporphyrin zinc complex 2 with
zinc -dione porphyrin derivative 3.
6
7
8
9
Considering the overall yield of the reaction, we did not further investigate the scope of this
approach until recently, when Akita et al. reported a novel route for preparation of similar fused
diporphyrins by oxidative annulation of -amino substituted porphyrins [15]. While this simple
approach was satisfying in the case of porphyrin derivatives having an unsubstituted meso-position,
in the case of tetraphenylporphyrin the reaction succeeded only for the Ni complex, and yields
similar to those previously obtained by us were reported.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
With this novel route in mind, we decided to investigate the possible preparation of 4a by
using 2, as the starting substrate, to undergo the subsequent oxidative annulation with DDQ. In
order to minimize the possible decomposition of 2, the oxidation reaction was carried out in situ,
adding DDQ (1 equivalent) directly to the solution of the o-diamino derivative, simply passed
through Celite without evaporation of the solvent. The mixture was heated at reflux and reaction
progress was followed by UV-Vis spectroscopy and TLC, which indicated a complete reaction after
1 hour. However, chromatographic purification afforded only traces of the bis-porphyrin 4a
together with other fractions, among which the dione 3 was identified.
Considering these results it was decided to explore milder reaction conditions and to carry
out the oxidation at room temperature as described for the mono-amino procedure [15]. Reaction
products were the same as those obtained at high temperature, with only slightly different yields.
This led us to consider steric hindrance among the two fused macrocycles as the reason for the
failure to obtain 4, and this prompted us to investigate a modification of the synthetic pathway
leading to the formation of a bridging group larger than the pyrazine unit.
For the foregoing reason it was decided to use diethyl oxalate, a well-known coupling
reagent [16], with the idea of preparing a dioxo-pyrazine derivative to react in situ with o-diamino
porphyrin to provide 6, according to the pathway outlined in Scheme 2.

ACCEPTED MANUSCRIPT
An excess of diethyl oxalate was added directly to the filtered solution of 2 and then the
1
2
mixture was heated at reflux for 3 hours; the work-up of the crude product afforded one major
fraction, along with traces of a more polar compound. Surprisingly, the spectroscopic
characterization led us to identify the compounds as 4a and 3, respectively.
Following this approach, the bisporphyrin 4a was obtained in a satisfying 42% yield, a value
more than double that previously obtained [15]. Furthermore, treatment of 4a with a small amount
of TFA afforded the corresponding free-base 4b, in 90% yield, opening the possibility to obtain
other metal derivatives, such as the bis-copper complex 4c, which indeed was obtained by addition
of a saturated solution of Cu(OAc)2.
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
<Please insert here Scheme 2>
Scheme 2. Synthesis of 4a by condensation of 2,3-diaminoporphyrin zinc complex 2 with diethyl
oxalate. i) CHCl3/TFA, r.t. ii) Cu(OAc)2 • H2O, CHCl3/MeOH, , 2h.
Considering that the reaction also afforded also traces of zinc -dione derivative 3 as a side product,
we decided to further investigate the influence of the reagent stoichiometry and to closely follow
the progress of the oxidative reaction. In fact, the most common and successful route for the
preparation of dioxo porphyrinoids requires the use of Dess-Martin periodinane (DMP) as the
oxidant [14a]. Such a compound is, however, quite photosensitive and rather expensive.
In Table 1 we report the results obtained by changing reaction conditions, such as reagent
molar ratio, reaction time and solvent mixtures.
<Please insert here Table 1>
These results give some indication as to the role of diethyl oxalate in the unexpected
formation of 4a, and a plausible reaction pathway is reported in Scheme 3. The first step is the
formation of the intermediate 5, obtained by condensation of the zinc diamino derivative 2 with
diethyl oxalate, in accord with the well known reactivity of this compound as a coupling reagent
with diamines [16]. This hypothesis is supported by the formation of a broad absorption band
around 550-600 nm and of a red-shifted shoulder on the Soret band in the UV-visible spectrum,

ACCEPTED MANUSCRIPT
observed during the monitoring of the reaction progress, which suggests the formation of the
1
2
3
4
5
6
7
8
9
annulated dioxopyrazino ring. When a 2/diethyl oxalate ratio of 1:25 was used, the formation of 5
was not complete and 2 was still present in the reaction mixture, which can lead to the formation of
4a by nucleophilic attack upon 5. When the 2/diethyl oxalate reagent ratio was increased to 1:40,
the formation of 5 was more complete and the reduced amount of unreacted 2 explains the
significant decrease in the yield of 4a. In this case the most abundant product is the -dione
porphyrin, produced by the hydrolysis of the labile intermediate 5.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
<Please insert here Scheme 3>
Scheme 3. Proposed reaction mechanism for 4a and 3 formations. i) 2/diethyl oxalate ratio of 1:25,
CH2Cl2/MeOH, h; ii) 2/diethyl oxalate ratio of 1:40, CH2Cl2/MeOH, h
With these improvements in the synthetic route, sufficient material was available to grow
single crystals, which allowed the X-ray crystallographic characterization of 4a (Figure 1).
a)
<Please insert here Figure 1 a>
b)
<Please insert here Figure 1 b>
Fig. 1. Molecular structure of 4a with 50% ellipsoids: a) front view; b) side view.
The molecule lies on an inversion center in the crystal, and the central pyrazino ring is
planar, with maximum deviation 0.002(3) Å. The four N atoms of each porphyrin are coplanar to
within 0.064(3) Å, and these N4 planes form dihedral angles of 30.2(1)° with the central pyrazino
plane, as shown in Figure 1. The Zn atoms have square-pyramidal coordination and lie 0.2719(5) Å
out of the N4 planes, with Zn-N distances 2.040(3) - 2.087(3) Å. The axial position is occupied by a

ACCEPTED MANUSCRIPT
coordinated MeOH molecule, with Zn-O distance 2.134(3) Å. The porphyrins have saddle
1
2
3
4
5
6
7
8
conformations, with opposite pairs of  C atoms lying an average of 0.73 Å out of the 24-atom
porphyrin plane, on the same side. The mean deviation of the 24 atoms from their best plane is
0.357 Å.
9
It is of interest to compare the structure of 4a with that of the recently-reported Ni(II)
complex of a similar dimeric ligand with 3,5-di-tert-butylphenyl groups at the 5, 10, and 15-
positions [15]. Like 4a, that molecule lies on a crystallographic inversion center, so its central
pyrazino ring is also essentially planar. The bond distances in its central pyrazino ring and two
fused pyrroles agree well with those in 4a. However, unlike the stepped overall shape of 4a, the
ring system of the Ni complex has an approximate C2 axis connecting the two Ni atoms, and its
porphyrins are twisted about this axis, with ruffled conformations.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
4. Photophysical characterization
The absorption spectrum of 4a in dichloromethane features a splitting of the Soret band,
resulting in an intense absorptivity in a broad region of the visible spectrum (> 50000 M-1 cm-1
between 390 and 510 nm) with two peaks at 402 and 492 nm (= 84000 and 114000 M-1 cm-1
respectively) and indicating strong ground state electronic interactions between the two porphyrins.
A Q-like set of broader, rather intense bands is also observed, with maximum at 592 nm ( = 41000
M-1 cm-1; Figure 2). Treatment of 4a with trifluoroacetic acid causes the protonation of the dyad,
with the subsequent demetalation, forming the corresponding cationic free-base derivative;
treatment of the protonated species with base affords the neutral free base, which can be metallated
with Cu(OAc)2 to give 4c. The corresponding absorption features changes are shown in Figure 2.
Similarly to previous observations in -fused oligoporphyrins [17], the absorption bands are red-
shifted compared with the parent TPP complex (ZnTPP, in this case), indicating a high degree of -
electron delocalization in the dimer.

ACCEPTED MANUSCRIPT
<Please insert here Figure 2>
1
2
3
Fig. 2. Absorption spectra of dyads in CH2Cl2.
4
5
6
7
8
9
The fluorescence spectrum at room temperature shows a low-intensity (Figure 3), structured
band with its maximum at 612 nm ( = 1.4 x 10-3, to be compared with 4.0 x 10-2 for ZnTPP),
presenting an excited state lifetime of 1.0 ns, much shorter than that observed for ZnTPP (2.7 ns)
[18].
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
<Please insert here Figure 3>
Fig. 3. Absorption (solid line) and fluorescence (dotted line) spectra of 4a in CH2Cl2.
The excitation spectrum of 4a is proportional to the absorption spectrum, indicating that the
S1 state is formed with almost unitary efficiency also when S2 and other excited states are initially
populated. Similar results were observed at 77K, where an excited state lifetime of 1.3 ns was
measured, that is very close to the one observed at RT. This indicates that the contribution of
thermally activated processes is not predominant for the deactivation of the excited state of 4a even
at room temperature.
5. Electrochemical characterization of 4a
To further characterize the degree of electronic interactions among the two porphyrin subunits in
these -fused dyads, we investigate the electrochemical properties of 4a by CV technique,
comparing them with those of 5,10,15,20-tetraphenylporphyrinato Zinc (ZnTPP). In Figure 4 we
report the CV obtained, summarizing the redox data in Table 2.
<Please insert here Figure 4>
Figure 4. Cyclic voltammograms of 4a and ZnTPP.
<Please insert here Table 2>
The electrochemistry of ZnTPP is well documented, and the data we obtained are in good accord
with those reported in the literature [19]. In the cathodic region, ZnTPP undergoes two well defined
one-electron processes, corresponding to the first and second porphyrin ring reductions to give

ACCEPTED MANUSCRIPT
consecutively the π-anion-radical, ZnTPP-, and the dianion ZnTPP2- species, at E1/2, red1=-1.48 V and
1
2
E1/2, red2=-1.80 V respectively, with a potential separation ∆E1/2 red= 320 mV.
The CV of 4a is more complex than that of ZnTPP, as showed in Figure 4. When the potential
sweep was initially moved to the cathodic region, 4a undergoes two reduction processes, which are
slightly shifted (60 mV) to more positive potentials than that of ZnTPP (E1/2, red1=-1.42 V, E1/2, red2=-
1.74 V). The peak currents of these two processes are approximately double than that observed for
the ZnTPP, indicating the overlapping of two independent one-electron reductions for each
porphyrin unit of 4a. In these reduction processes the two macrocycles behave as equivalent, but
not interacting reaction centers.
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
The dyad 4a shows a completely different behavior in the anodic region; while ZnTPP undergoes
two one-electron porphyrin-ring centered oxidations at E1/2, ox1=0.76 V and E1/2, ox2=1.06 V with a
potential separation of ∆E1/2 ox= 300 mV, in 4a these ring-centered oxidations are split into two
one-electron transfer processes, Figure 4 (bottom), with the overall process resulting in four
reversible oxidation waves.
The first two oxidations of 4a lead to the formation of a bis--cation radical upon the stepwise
oxidation of each Zn-porphyrin units of the dyad [Equation (1) and (2)], while the next two
separated oxidations of 4a finally give the corresponding bis-porphyrin dication [Equation (3) and
(4)].
.
[ZnP-pyrazine-ZnP]  [ZnP-pyrazine-ZnP ] + + e-
(1)
(2)
.
.
[ZnP-pyrazine-ZnP]  [ZnP -pyrazine-ZnP ]2+ + e-
.
[ZnP-pyrazine-ZnP]  [ZnP -pyrazine-ZnP]3+ + e-
(3)
(4)
[ZnP-pyrazine-ZnP]  [ZnP-pyrazine-ZnP]4+ + e-

ACCEPTED MANUSCRIPT
The splitting of these oxidation processes indicates that the porphryin subunits in the dyad behave
1
2
as two equivalent and interacting redox centers. The difference in E1/2 between the first two
oxidations is 170 mV (E1/2,ox1 = 0.74 and E1/2,ox2 = 0.91 V), while the splitting is more significant
for the second oxidation processes, separated by 310 mV gap (E1/2, ox3= 1.00 V and E1/2, ox4=1.31 V).
It should be noted that two non-coupled irreversible processes, located at Epa= 0.56 V and Epc= -
0.88 V respectively, were also detected for dyad 4a. Both these processes are indicated with an
asterisk (*) in Figure 4. Considering that the Zn ion is not redox active in these conditions, the
suspect arose that these processes could be assigned to the redox behavior of pyrazine spacer of 4a;
this unit undergoes a rapid reduction process at Epc= -0.88 V, which is in accord with data reported
in literature [20]. This reduction could induce the formation of a dihydropyrazine-like species,
which interrupts the conjugation among the two porphyrin moities, explaining the absence of
electronic coupling in the cathodic region. At the return sweep the cathodic wave corresponding to
the oxidation of formed species was registered at Epa= 0.56 V, which restores the pyrazine spacer
and consequently the conjugation among the two porphyrin units in the dyad. This electronic
coupling determines the observed splitting of the oxidation processes.
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
To further confirm this hypothesis, we started the potential sweep in the opposite order, beginning
toward the anodic region of positive potentials. In this case we did not observe the wave at 0.56 V
(Figure 5) and only the four processes belonging to the porphyrin moities were observed. A
cathodic wave at -0.88 V corresponding to pyrazine oxidation was still observed, although with a
lower intensity than the previous case, confirming our hypothesis on pyrazine-spacer related red-ox
processes.
<Please insert here Figure 5>
Figure 5. Cyclic voltammogram of dyad 4a; first scan towards oxidation.

ACCEPTED MANUSCRIPT
6. Conclusion
1
2
We have established a simple and efficient route for the preparation of a -pyrazino-fused
3
4
5
6
7
8
9
porphyrin dyad. The X-ray crystallographic and the photophysical characterization of the -fused
porphyrin dyad highlight interesting features of this derivative. It is worth mentioning that the
reported synthetic route allows the preparation of the free-base dyad, after mild treatment with acid.
This easy demetalation process opens up the possibility to obtain different metal derivatives of the
dyad and consequently to modulate the related photophysical characteristics, potentially making
these species suitable for optoelectronic applications.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
7. Acknowledgments
This research was supported by MIUR Italy (PRIN project 2009Z9ASCA) and the US National
Institutes of Health (K.M.S. grant CA132861).
8. References and notes
[1] (a) Barker CA, Zeng XS., Bettington S, Batsanov AS, Bryce MR, Beeby A. Porphyrin,
phthalocyanine and porphyrazine derivatives with multifluorenyl substituents as efficient
deep-red emitters. Chem Eur J 2007; 13: 6710-6717; (b) Pandey R, Zheng G. Porphyrins as
photosensitizers in photodynamic therapy. In: Kadish KM, Smith KM, Guilard R, editors.
The Porphyrin Handbook, San Diego: Academic Press; 2000, vol. 6, p. 157-225; (c)
Lebedev AY, Filatov MA, Cheprakov AV, Vinagradov SA, Effects of Structural
Deformations on Optical Properties of Tetrabenzoporphyrins: Free-Bases and Pd Complexes.
J Phys Chem A 2008; 112: 7723-7733.
[2] Martinez-Diaz MV, de la Torre G, Torres T. Lighting porphyrins and phthalocyanines for
molecular photovoltaics. Chem Commun 2010; 46: 7090-7108.

ACCEPTED MANUSCRIPT
[3] Yella A, Lee HW, Tsao HN, Yi C, Chandiran AK, Nazeeruddin MK, et al. Porphyrin-
1
2
3
4
5
sensitized solar cells with cobalt (II/III)-based redox electrolyte exceed 12 percent efficiency.
Science 2011; 334: 629–634.
6
7
8
9
[4] Mai C-L, Huang W-K, Lu H-P, Lee C-W, Chiu C-L, Liang Y-R, et al. Synthesis and
characterization of diporphyrin sensitizers for dye-sensitized solar cells. Chem Commun
2010 ; 46: 809-811.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
[5] Sessler JL, Gebauer A, Vogel E. Expanded porphyrins. In: Kadish KM, Smith KM, Guilard
R, editors. The Porphyrin Handbook, San Diego: Academic Press; 2000, vol. 2, p. 55-121.
[6] Anderson HL. Chem Commun 1999; 2323-2330.
[7] (a) Beavington R, Burn PL. Bis-porphyrin arrays. Part 1. The synthesis of meso-
halophenylporphyrin--diones. J Chem Soc Perkin Trans 1 1999; 5: 583-592; (b) Crossley
MJ, Johnston LA. Laterally-extended porphyrin systems incorporating a switchable unit.
Chem Commun 2002; 1122-1123; (c) Khoury T, Crossley MJ. A strategy for the stepwise
ring annulation of all four pyrrolic rings of a porphyrin. Chem Commun 2007; 4851-4853.
[8] Tsuda A, Furuta H, Osuka A. Syntheses, Structural Characterizations, and Optical and
Electrochemical Properties of Directly Fused Diporphyrins. J Am Chem Soc 2001; 123:
10304-10321.
[9] (a) Vicente MHG, Cancilla MT, Lebrilla CB, Smith KM. Cruciform porphyrin pentamers.
Chem Commun 1998; 2355-2356; (b) Lee SH, Smith KM. Sulfolenoporphyrins: synthons
for refunctionalization of porphyrins. Tetrahedron Letters 2004; 46: 2009-2013.
[10]
Credi A, Prodi L. From observed to corrected luminescence intensity of solution
systems: an easy-to-apply correction method for standard spectrofluorimeters.
Spectrochimica Acta Part A 1998; 54: 159-170.
[11]
Richeter S, Jeandon C, Gisselbrecht JP, Ruppert RGR, Callot HJ. Synthesis of new
porphyrins with peripheral conjugated chelates and their use for the preparation of porphyrin
dimers linked by metal ions. Inorg Chem 2004; 43: 251-263.

ACCEPTED MANUSCRIPT
[12]
Richeter S, Hadj-Aıssa A, Taffin C, van der Leeb A, Leclercq D. Synthesis and
1
2
3
structural characterisation of the first N-heterocyclic carbene ligand fused to a porphyrin.
4
5
Chem Commun 2007; 2148-2150.
6
7
8
9
[13]
(a) Mitzel F, FitzGerald S, Bee A, Faust R. Acetylenic Quinoxalinoporphyrazines as
Photosensitisers for Photodynamic Therapy. Chem Eur J 2003; 9: 1233-1241; (b) Khoury T,
Crossley MJ. Expansion of the porphyrin π-system: stepwise annelation of porphyrin β,β′ -
pyrrolic faces leading to trisquinoxalinoporphyrin. New J Chem 2009; 33: 1076-1086; (c)
Starnes SD, Arungundram S, Saunders CH. Anion sensors based on -disubstituted
porphyrin derivatives. Tetrahedron Letters 2002; 43: 7785–7788; (d) Starnes SD, Rudkevich
DM, Rebek JJr. Cavitand-Porphyrins J Am Chem Soc 2001; 123: 4659-4669; (e)
Crossley MJ, King LG, Newsom IA, Sheehan CS. Investigation of a ‘reverse’ approach to
extended porphyrin systems. Synthesis of a 2,3-diaminoporphyrin and its reactions with α-
diones J Chem Soc Perkin Trans 1 1996; 2675-2684. (f) Crossley MJ, Govenlock LJ,
Prashar JK. Synthesis of porphyrin-2,3,12,13- and -2,3,7,8-tetraones: building blocks for the
synthesis of extended porphyrin arrays. J Chem Soc Chem Commun 1995; 2379-2380.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
[14]
(a) Beavington R, Rees PA, Burn PL. A study on the oxidation of 2-
hydroxyporphyrins to porphyrin-α-diones. J Chem Soc Perkin Trans 1 1998; 2847-2852; (b)
Daniell HW, Williams SC, Jenkins HA, Bruckner C. Oxidation of meso-tetraphenyl-2,3-
dihydroxychlorin: simplified synthesis of β,β-dioxochlorins. Tetrahedron Letters 2003;
44: 4045-4049.
[15]
Akita M, Hiroto S, Shinokubo H. Oxidative annulation of β-aminoporphyrins into
pyrazine-fused diporphyrins. Angew Chem Int Ed 2012; 51: 2894-2897.
[16]
(a) Musil Z, Zimcik P, Miletin M, Kopecky K, Lenco J. Synthesis, separation and
UV/Vis spectroscopy of pyrazino-quinoxalino-porphyrazine macrocycles. Eur J Org Chem
2007; 4535-4542; (b) Wen L, Nietfeld JP, Amb CM, Rasmessen SC. Synthesis and

ACCEPTED MANUSCRIPT
Characterization of New 2,3-Disubstituted Thieno[3,4-b]pyrazines: Tunable Building
1
2
3
Blocks for Low Band Gap Conjugated Materials. J Org Chem 2008; 73: 8529-8536.
4
5
6
7
8
9
[17]
Paolesse R, Jaquinod L, Della Sala F, Nurco DJ, Prodi L, Montalti M, et al. β-Fused
Oligoporphyrins:ꢀ A Novel Approach to a New Type of Extended Aromatic System. J Am
Chem Soc 2000; 122: 11295-11302.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
[18]
Montalti M, Credi A, Prodi L, Gandolfi MT. In Handbook of Photochemistry, 3rd
Ed., CRC Taylor & Francis, Boca Raton, 2006.
[19]
Kadish KM, Van Caemelbecke E, Royal G. Electrochemistry of metalloporphyrins
in nonaqueous media. In: Kadish KM, Smith KM, Guilard R, editors. The Porphyrin
Handbook, San Diego: Academic Press; 2000, vol. 8, p. 1-97.
[20]
BurešF, Čermáková H, Kulhánek J, Ludwig M, Kuznik W, Kityk IV, Mikysek T,
Růžička A. Structure–property relationships and nonlinear optical effects in donor-
substituted dicyanopyrazine-derived push–pull chromophores with enlarged and varied π-
linkers. Eur J Org Chem 2012; 529–538.

Figure
Click here to download high resolution image
ACCEPTED MANUSCRIPT

Figure
ACCEPTED MANUSCRIPT
Click here to download high resolution image

Figure
ACCEPTED MANUSCRIPT
Table 1. Products obtained from the preparation of 4a.
2/Et2oxalate
Reaction conditions
Solvent mixture
Yield % (4a)
Yield % (3)
ratio
1 : 10
1 : 25
1 : 25
1 : 40
3h, 
3h, 
6h, 
6h, 
CH2Cl2/EtOH
CH2Cl2/EtOH
CH2Cl2/MeOH
CHCl3/MeOH
Traces
25
Traces
Traces
6
42
5
48

Figure
Click here to download high resolution image
ACCEPTED MANUSCRIPT

Figure
ACCEPTED MANUSCRIPT
Click here to download high resolution image

Figure
ACCEPTED MANUSCRIPT
Click here to download high resolution image

Figure
Click here to download high resolution image
ACCEPTED MANUSCRIPT

Figure
ACCEPTED MANUSCRIPT
Click here to download high resolution image

Figure
ACCEPTED MANUSCRIPT
Click here to download high resolution image

Table
ACCEPTED MANUSCRIPT
Table 2. Summary on cyclic voltammetry of 4a and ZnTPPa.
Compound Oxidation
Reduction
HOMO-
LUMO gap
Vb
(E1/2, V)
(E1/2, V)
1.06; 0.76
-1.48; -1.80
-0.88*; -1.42; -1.74
2.24
2.16
ZnTPP
4a
1.31; 1.00; 0.91; 0.74;
0.56*
a data obtained in 3 electrode cell with button Pt WE, wire Pt CE, SCE reference; 1 mM solutions of
4a and ZnTPP were prepared in CH2Cl2 solvent containing 0.1 M TBAClO4, scan rate 0.1 V/s;
bEvaluated as the potential difference between the first oxidation and first reduction.