An efficient construction of a C3-symmetric macrocycle by head to tail cyclotrimerization of an unsymmetrical diene via a sequence of highly regio- and stereoselective metathesis reactions

Article abstract of DOI:10.1016/j.tetlet.2005.03.088

A sequence of highly regio- and stereoselective intermolecular metatheses followed by ring-closing metathesis of an 1-allyl-3-(3-butenyl)cyclohexanol led to a C₃-symmetric head to tail cyclic trimer; a 24-membered macrocycle containing three inward directed hydroxyl groups creating a hydrophilic cavity.

Full text of DOI:10.1016/j.tetlet.2005.03.088

Tetrahedron
Letters
Tetrahedron Letters 46 (2005) 3381–3383
An efficient construction of a C3-symmetric macrocycle by head
to tail cyclotrimerization of an unsymmetrical diene via a
sequence of highly regio- and stereoselective metathesis reactionsq
A. Srikrishna* and Dattatraya H. Dethe
Department of Organic Chemistry, Indian Institute of Science, Bangalore 560012, India
Received 8 January 2005; revised 9 March 2005; accepted 15 March 2005
Available online 1 April 2005
Abstract—A sequence of highly regio- and stereoselective intermolecular metatheses followed by ring-closing metathesis of an
1-allyl-3-(3-butenyl)cyclohexanol led to a C3-symmetric head to tail cyclic trimer; a 24-membered macrocycle containing three
inward directed hydroxylgroups creating a hydrophiilc cavity.
ꢀ 2005 Elsevier Ltd. All rights reserved.
The last decade has witnessed an exponential growth in
the application of the ring-closing olefin metathesis
(RCM) reaction in organic synthesis.1 The catalytic nat-
ure of the reaction in combination with its operational
simplicity and the remarkable tolerance of Grubbsꢀ first
(I) and second (II) generation catalysts to various func-
tionalgroups and their stabiilty to various conditions
are key factors responsible for the increased use of the
RCM reaction. A number of research groups have
explored the RCM reaction for the construction of
medium-ring and macrocyclic compounds.1 However,
during the construction of medium rings by RCM reac-
tions, cyclic dimers have been encountered in a number
of instances. For example, during their attempts to con-
struct paddlanes by the RCM reaction of 9-thiabicy-
clo[4.2.1]nonane dioxides containing two identical
alkenyl side chains at the two bridgehead positions,
Paquette et al. reported2 the isolation of several dimers
(15–30%) and trimers (9–20%) depending on the length
of the side chains.
chemists.3 One of the most difficult tasks in the synthesis
of the taxane (1) framework is the construction of the B-
ring, because of the well known complications associ-
ated with the formation of an eight-membered ring.4
Recently, Blechert and co-workers reported5 the
construction of the AB-ring system of taxanes by
employing a RCM reaction of a substituted cyclohexane
with two cis-oriented side arms at the 1- and 3-positions.
Encouraged by this report, we have explored the RCM
reaction of 1-allyl-3-(3-butenyl)cyclohexanes derived
from the readily and abundantly available monoterpene
(R)-carvone 4 to generate the AB-ring system of taxanes
(e.g., 3!2) containing a hydroxy group at C-1 (as in
taxol). However, this resulted in the generation of a
symmetric cyclic trimer comprising of a 24-membered
carbocyclic ring system, instead of the AB-ring system
of taxanes, and is the subject of this communication.
PCy3
Cl
Ru
N
N
C
Cl
Ph
B
A
PCy3
Paclitaxel (Taxol) by virtue of its complex structure,
coupled with its potent antitumour activity, has
attracted the attention of a large number of synthetic
Ru
Cl
Ph
Taxane 1
Cl
I
II
Grubbs' catalysts
PCy3
Keywords: RCM reaction; Cyclotrimerization; AB-ring of taxanes;
Enantiospecific synthesis.
qChiralSynthons from Carvone, Part 68. For Parts 66 and 67, see
Ref. 9.
*
Corresponding author. Tel.: +91 80 22932215; fax: +91 80
23600683; e-mail: ask@orgchem.iisc.ernet.in
0040-4039/$ - see front matter ꢀ 2005 Elsevier Ltd. All rights reserved.
doi:10.1016/j.tetlet.2005.03.088

3382
A. Srikrishna, D. H. Dethe / Tetrahedron Letters 46 (2005) 3381–3383
and 18,ꢁ which were separated on a silica gel column.
The RCM reaction of the cis-alcohol 15 under a variety
of conditions using Grubbsꢀ first generation catalyst did
not furnish any products. However, refluxing a 0.05 M
benzene solution of the alcohol 15 with 5 mol% of
Grubbsꢀ second generation catalyst for 1 h generated a
ꢁ All the compounds exhibited spectral data (IR, 1H and 13C NMR,
LRMS and HRMS) consistent with their structures. Selected spectral
24
data for the minor alcohol 18: ½aꢀD À26.7 (c 1.5, CHCl3). IR (neat):
m
max/cmÀ1 3568, 910, 887. 1H NMR (300 MHz, CDCl3+CCl4): d
5 . 9 5 – 5 . 7 0 ( 2 H , m , 2 · C H @C H 2 ) , 5 . 1 8 ( 1 H , d d ,
J 10.2 and 2.1 Hz), 5.09 (1H, d, J 18 Hz), 4.97 (1H, dd, J 17.1 and
1.8 Hz), 4.90 (1H, d, J 10.2 Hz), 4.68 (2H, s, C@CH2), 2.45–2.30 (1H,
m), 2.31 (1H, dd, J 13.2 and 8.1 Hz), 2.20–2.05 (2H, m), 1.90–1.65
(2H, m), 1.73 (3H, s, olefinic-CH3), 1.65–1.45 (5H, m), 1.35–1.20 (2H,
m), 1.04 (3H, s) and 1.02 (3H, s) [2 · tert-CH3]. 13C NMR (75 MHz,
CDCl3+CCl4): d 150.1 (C, C@CH2), 139.4 (CH, CH@CH2), 134.1
(CH, CH@CH2), 119.9 (CH2, CH@CH2), 114.4 (CH2, CH@CH2),
108.8 (CH2, C@CH2), 75.6 (C, C–OH), 46.9 (CH), 42.1 (CH2), 39.6
(C), 38.4 (CH2), 34.8 (CH), 34.0 (CH2), 29.1 (CH2), 28.8 (CH2), 27.2
(CH3), 22.3 (CH3), 21.3 (CH3). Mass: m/z 221 (MÀC3H5, 35%), 203
(15), 163 (15), 137 (22), 123 (15), 121 (25), 109 (28), 107 (25), 95 (70),
93 (28). HRMS: m/z for C18H30ONa (M+Na), calcd: 285.2194.
Scheme 1. Reagents and conditions: (a) i. Li, (–OCH2CH2O–)-
CHCH2CH2Br, THF, 1 h; ii. PCC, silica gel, CH2Cl2, 4 h; (b) Li, liq.
NH3, THF; MeI; (c) LDA, THF, MeI, À70 ꢁC!rt, 15 h; (d) O3/O2,
MeOH:CH2Cl2 (1:5), À70 ꢁC; Ac2O, Et3N, DMAP, C6H6, reflux, 6 h;
(e) AcOH, H2O, 60 ꢁC, 1 h; (f) Ph3P+CH3IÀ, K+tAmOÀ; C6H6, 0–5 ꢁC,
5 min; (g) Zn, CH2@CHCH2Br, THF, 20 min; (h) PCC, silica gel,
CH2Cl2, 4 h.
Found: 285.2189.
Initially, we explored the RCM reaction of diene 5.
Diene 5 was obtained from (R)-carvone 4 (Scheme 1).
Alkylative 1,3-enone transposition transformed carvone
4 into the b-substituted enone 6. Reductive alkylation of
the enone 6 with lithium in liquid ammonia and methyl
iodide furnished the cyclohexanone 7 in a highly stereo-
selective manner. Kinetic alkylation with LDA and
methyl iodide followed by ozonolysis and Criegee frag-
mentation6 of 8 transformed the cyclohexanone 7 into
the enone 9. The acetalgroup in 9 was transformed into
a terminal olefin via hydrolysis and Wittig reaction of 10
to generate the enone 11. Addition of an allyl group to
the enone 11 gave the tertiary alcohol 12, which on oxid-
ation furnished the enone 5. RCM reactions of both
the enone 5 and the alcohol 12 were explored with
Grubbsꢀ first and second generation catalysts. However,
no detectable amounts of RCM products 13 or 14 were
formed under a variety of conditions.
24
For the major isomer 15: ½aꢀD À9.7 (c 6.0, CHCl3). IR (neat): mmax
/
cmÀ1 3572, 910, 887. 1H NMR (300 MHz, CDCl3+CCl4): d 5.96–5.70
(2H, m, 2 · CH@CH2), 5.17 (1H, dd, J 9.9 and 1.8 Hz), 5.10 (1H, br
d, J 18.6 Hz), 4.98 (1H, dd, J 17.1 and 1.8 Hz), 4.92 (1H, br d, J
11.1 Hz), 4.66 (2H, s, C@CH2), 2.40 (1H, dd, J 13.8 and 8.1 Hz),
2.35–2.10 (2H, m), 2.13 (1H, dd, J 13.8 and 6.9 Hz), 2.05–1.85 (1H,
m), 1.71 (3H, s, olefinic-CH3), 1.75–1.50 (4H, m), 1.48 (1H, d, J
13.2 Hz), 1.44 (1H, d, J 13.2 Hz), 1.10–0.90 (2H, m), 0.97 (3H, s) and
0.79 (3H, s) [2 · tert-CH3]. 13C NMR (75 MHz, CDCl3+CCl4): d
150.0 (C, C@CH2), 139.2 (CH, CH@CH2), 134.5 (CH, CH@CH2),
119.5 (CH2, CH@CH2), 114.5 (CH2, CH@CH2), 108.8 (CH2,
C@CH2), 75.6 (C, C–OH), 41.3 (CH), 41.2 (CH2), 40.4 (C), 39.4
(CH), 37.7 (CH2), 33.0 (CH2), 32.5 (CH2), 30.2 (CH2), 21.0 (CH3),
20.9 (CH3), 17.5 (CH3). Mass: m/z 221 (MÀC3H5, 35%), 203 (10), 163
(12), 137 (18), 123 (15), 121 (25), 109 (28), 107 (25), 95 (65). HRMS:
m/z for C18H30ONa (M+Na), calcd: 285.2194. Found: 285.2186.
24
For the trimer 20: mp 174–176 ꢁC ½aꢀD +67.5 (c 0.8, CHCl3). IR
(neat): mmax/cmÀ1 3435, 884. 1H NMR (300 MHz, CDCl3+CCl4): d
5.55–5.25 (6H, m, CH@CH), 4.65–4.55 (6H, m, C@CH2), 2.34 (3H,
dd, J 13.2 and 9.6 Hz), 2.30–1.85 (18H, m), 1.80–1.45 (12H, m), 1.15–
0.75 (6H, m), 1.66 (9H, s, 3 · olefinic-CH3), 0.95 (9H, s) and 0.75 (9H,
s) [6 · tert-CH3]. 13C NMR (75 MHz, CDCl3+CCl4): d 150.3 (C),
135.6 (CH), 126.3 (CH), 108.6 (CH2), 75.3 (C), 40.1 (C), 39.7 (CH2),
39.4 (CH), 38.3 (CH), 37.9 (CH2), 30.8 (CH2), 30.0 (CH2), 27.4
(CH2), 21.2 (CH3), 21.1 (CH3), 17.8 (CH3). Mass: m/z 667
[MÀH2OÀOH, 15], 413 (20), 217 (45), 175 (30), 161 (30), 147 (25),
135 (30), 121 (60), 107 (75), 95 (80). HRMS: m/z for C48H78O3Na
(M+Na), calcd: 725.5849. Found: 725.5847.
Crystal data for the compound 20: X-ray data were collected at 293K
on a SMART CCD-Bruker diffractometer with graphite-monochro-
˚
The trans-orientation of the two side chains in the alco-
hol 12 and the substantialincrease in strain for the form-
ation of a bicyclo[5.3.1]undecane with a bridgehead
double bond are perhaps responsible for the failure of
the RCM reactions of the alcohol 12 and the enone
5. Hence, we contemplated the RCM reaction of the
alcohol 15, Scheme 2. Thus, 1,3-enone transposition of
carvone 4 generated 3-(3-butenyl)carvone 16, which on
reductive methylation furnished the cyclohexanone 17
in a highly stereoselective manner. Reaction of the
cyclohexanone 17 with allyl bromide and zinc furnished
a 10:1 mixture of the cis- and trans-tertiary alcohols 15
mated Mo-Ka radiation (k = 0.7107 A). Structure was solved by
direct methods (SIR92). Refinement was by full-matrix least-squares
procedures on F2 using SHELXL-97. C48H78O3ÆH2O; MW 721.18;
crystalsystem: orthorhombic, space group: P212121, cell parameters:
3
a = 13.306(3) A, b = 18.294(4) A, c = 18.972(4) A, V = 4618.2(17) A ,
˚
˚
˚
˚
Z = 4, q (calcd) = 1.034 g cmÀ3, F(000) = 1592, l = 0.063 mmÀ1
,
˚
k = 0.71 A. R1 = 0.089 for 5678 F0 > 4r (F0) and 0.1258 for all 8448
data, wR2 = 0.2548, GoF = 1.020, Restrained GoF = 1.020 for all
data. Crystallographic data have been deposited with the Cambridge
Crystallographic Data Centre [CCDC 259490]. Copies of the data can
be obtained free of charge via www.ccdc.cam.ac.uk/conts/retriev-
ing.html or CCDC, 12 Union Road, Cambridge CB21EZ, UK (fax:
(+44) 1223 336 033; email:deposit@ccdc.cam.ac.uk).

A. Srikrishna, D. H. Dethe / Tetrahedron Letters 46 (2005) 3381–3383
3383
In conclusion, we have observed that the presence of
appropriate side arms at the C-1 and C-11 positions of
the A-ring of taxanes efficiently generated a C3-symmet-
ric head–tail cyclic trimer in a highly regio- and stereo-
selective manner via metathesis reactions, instead of
the expected AB-ring system of taxane. The present re-
sult is in contrast to the successful construction of the
AB-ring of taxanes by Blechert and co-workers employ-
ing a similar approach,8 confirming that minor vari-
ations in substrates can lead to varying results in RCM
reactions. The presence of one water molecule in the
centre (cf. Fig. 1) as a guest reveals the potential of
the cyclic triol 20 as a suitable chiral host molecule.7
Further investigations on the generality of this reaction
as well as the binding ability of the triol 20 are currently
under progress.
Scheme 2. Reagents and conditions: (a) i. Li, CH2@CHCH2CH2Br,
40 min; ii. PCC, silica gel, CH2Cl2, 4 h; (b) Li, liq. NH3, THF, MeI;
(c) Zn, CH2@CHCH2Br, THF, 20 min.
Acknowledgements
We thank Professor Blechert for exchanging inform-
ation.
References and notes
1. (a) Grubbs, R. H.; Chang, S. Tetrahedron 1998, 54, 4413–
4450; (b) Furstner, A. Angew. Chem., Int. Ed. 2000, 39,
¨
Figure 1. ORTEP diagram of the trimer 20 (hydrogen atoms were
not included for clarity).
3013–3043; (c) Trnka, T. M.; Grubbs, R. H. Acc. Chem.
Res. 2001, 34, 18–29.
2. Paquette, L. A.; Fabris, F.; Tae, J.; Gallucci, J. C.;
Hofferberth, J. E. J. Am. Chem. Soc. 2000, 122, 3391–
3398; Formation of cyclic trimers have also been reported
with ethers and esters. See: Lee, C. W.; Grubbs, R. H.
product, mp 174–176 ꢁC, in an isolated yield of 70%,
1
which exhibited H and 13C NMR spectraldata match-
ing for the RCM product 19. However, mass spectro-
scopy failed to show the expected molecular ion, which
prompted us to resort to X-ray analysis. Single crystal
X-ray diffraction analysis revealed the structure of the
product as the symmetric head to tailcycilc trimer 20.ꢁ
As depicted in Figure 1, the triol 20 accommodated
one molecule of water as a guest via hydrogen bonding
with the three inward pointing hydroxylgroups.
Increasing the dilution of the reaction to 0.005 M only
resulted in a decrease in the yield of the trimer 20, and
no detectable amount of either a monomeric or dimeric
product was noticed. Formation of the structurally or-
dered trimer 20 from an unsymmetricaldiene 15 is very
intriguing. It requires a very highly planned reaction se-
quence, two cross-coupling metatheses and one RCM in
a highly regio- (butenyl of one moiety couples with the
J. Org. Chem. 2001, 66, 7155–7158; Furstner, A.; Thiel, O.
¨
R.; Ackermann, L. Org. Lett. 2001, 3, 449–451; Tae, J.;
Yang, Y. K. Org. Lett. 2003, 5, 741–744.
3. Srikrishna, A.; Dethe, D. H.; Kumar, P. R. Tetrahedron
Lett. 2004, 45, 2939–2942; Uttaro, J.-P.; Audran, G.;
Galano, J.-M.; Monti, H. Tetrahedron Lett. 2002, 43, 2757–
2760, and references cited therein.
4. Mehta, G.; Singh, V. Chem. Rev. 1999, 99, 881–930.
5. Wenz, M.; Großbach, D.; Beitzel, M.; Blechert, S. Synthesis
1999, 607–614.
6. Schreiber, S. L.; Liew, W.-F. Tetrahedron Lett. 1983, 24,
2363–2366.
7. Moberg, C. Angew. Chem., Int. Ed. 1998, 37, 248–268.
8. We were given to understand that Blechert and co-workers
have not encountered any dimeric or trimeric products in
their synthesis of the AB ring of taxanes via the RCM
reaction5 (Personalcommunication).
allyl of the counterpart) and stereoselective manner to
7
9. Part 66: Srikrishna, A.; Kumar, P. R. Tetrahedron Lett.
2004, 45, 6867–6870; , Part 67: Srikrishna, A.; Gharpure, S.
J. Proc. AP Akad. Sci. 2005, 9, 115–124.
generate the C3-symmetric head to tailcycilc trimer,
24-membered E,E,E-cyclotetracosatrienetriol 20.
a