Products Categories
CAS No.: | 405-99-2 |
---|---|
Name: | 4-Fluorostyrene |
Article Data: | 121 |
Molecular Structure: | |
Formula: | C8H7F |
Molecular Weight: | 122.142 |
Synonyms: | Styrene,p-fluoro- (6CI,7CI,8CI);1-Ethenyl-4-fluorobenzene;1-Fluoro-4-vinylbenzene;p-Fluorostyrene;p-Vinylfluorobenzene; |
EINECS: | 206-975-0 |
Density: | 1.021 g/cm3 |
Melting Point: | -36--33 °C |
Boiling Point: | 145.3 °C at 760 mmHg |
Flash Point: | 31.3 °C |
Solubility: | Insoluble in water. |
Appearance: | clear colorless to very slightly yellow liquid |
Hazard Symbols: | F, Xi |
Risk Codes: | 10-36/37/38 |
Safety: | 23-24/25-37/39-26-16 |
Transport Information: | UN 1993 3/PG 3 |
PSA: | 0.00000 |
LogP: | 2.46870 |
The Benzene,1-ethenyl-4-fluoro-, with the CAS registry number 405-99-2, is also known as 4-Fluorostyrene. It belongs to the product categories of Styrenes; Monomers; Polymer Science; Styrene and Functionalized Styrene Monomers. Its EINECS number is 206-975-0. This chemical's molecular formula is C8H7F and formula weight is 122.14. What's more, its IUPAC name is 1-ethenyl-4-fluorobenzene.
Physical properties of Benzene,1-ethenyl-4-fluoro- are: (1)ACD/LogP: 2.71; (2)# of Rule of 5 Violations: 0; (3)ACD/LogD (pH 5.5): 2.71; (4)ACD/BCF (pH 5.5): 67.39; (5)ACD/KOC (pH 5.5): 708.76; (6)Index of Refraction: 1.533; (7)Molar Refractivity: 37.17 cm3; (8)Molar Volume: 119.5 cm3; (9)Surface Tension: 29.7 dyne/cm; (10)Density: 1.021 g/cm3; (11)Flash Point: 31.3 °C; (12)Enthalpy of Vaporization: 36.66 kJ/mol; (13)Boiling Point: 145.3 °C at 760 mmHg; (14)Vapour Pressure: 6.17 mmHg at 25°C.
Uses of Benzene,1-ethenyl-4-fluoro-: it can be used to produce 4-(4-fluoro-phenyl)-[1,3]dioxane at the temperature of 60°C. It will need solvent dioxane with the reaction time of 5 hours. It need catalyst Lewatit SP 120 (acid form). The yield is about 94%.
When you are using this chemical, please be cautious about it as the following:
It is flammable, so keep it away from sources of ignition - No smoking. It is irritating to eyes, respiratory system and skin. You must avoid contact with skin and eyes. In case of contact with eyes, you need rinse immediately with plenty of water and seek medical advice. You should not breathe gas/fumes/vapour/spray (appropriate wording to be specified by the manufacturer). When using it, you should wear suitable gloves and eye/face protection.
You can still convert the following datas into molecular structure:
(1)Canonical SMILES: C=CC1=CC=C(C=C1)F
(2)InChI: InChI=1S/C8H7F/c1-2-7-3-5-8(9)6-4-7/h2-6H,1H2
(3)InChIKey: JWVTWJNGILGLAT-UHFFFAOYSA-N