19756-04-8Relevant articles and documents
Amide-silyl ligand exchanges and equilibria among group 4 amide and silyl complexes
Cai, Hu,Yu, Xianghua,Chen, Shujian,Qiu, He,Guzei, Ilia A.,Xue, Zi-Ling
, p. 8071 - 8078 (2007)
M(NMe2)4 (M = Zr, 1a; Hf, 1b) and the silyl anion (SiButPh2)- (2) in Li(THF)2SiBu tPh2 (2-Li) were found to undergo a ligand exchange to give [M(NMe2)3(SiButPh2) 2]- (M = Zr, 3a; Hf, 3b) and [M(NMe2) 5]- (M = Zr, 4a; Hf, 4b) in THF. The reaction is reversible, leading to equilibria: 2 1a (or 1b) + 2 2 ? 3a (or 3b) + 4a (or 4b). In toluene, the reaction of 1a with 2 yields [(Me2N) 3Zr(SiButPh2)2] -[Zr(NMe2)5Li2(THF) 4]+ (5) as an ionic pair. The silyl anion 2 selectively attacks the -N(SiMe3)2 ligand in (Me2N) 3Zr-N(SiMe3)2 (6a) to give 3a and [N(SiMe 3)2]- (7) in reversible reaction: 6a + 2 2 ? 3a + 7. The following equilibria have also been observed and studied: 2M(NMe2)4 (1a; 1b) + [Si(SiMe3) 3]- (8) ? (Me2N)3M-Si(SiMe 3)3 (M = Zr, 9a; Hf, 9b) + [M(NMe2) 5]- (M = Zr, 4a; Hf, 4b); 6a (or 6b) + 8 ? 9a (or 9b) + [N(SiMe3)2]- (7). The current study represents rare, direct observations of reversible amide-silyl exchanges and their equilibria. Crystal structures of 5, (Me2N)3Hf- Si(SiMe3)3 (9b), and [Hf(NMe2) 4]2 (dimer of 1b), as well as the preparation of (Me 2N)3M-N(SiMe3)2 (6a; 6b) are also reported.
Fabrication and characterization of ALD-grown ZrO2:Ge thin films on Si(100) using CpZr(NMe2)3 and (NMe2)2Ge(ipr2en) precursors with ozone
Jung, Jae-Sun,Kim, Dae-Hyun,Shin, Jin-Ho,Kang, Jung-Soo,Thomas, Joseph P.,Leung,Kang, Jun-Gill
, p. 2162 - 2165 (2015)
-
Efficient synthesis of rac-(ethylenebis(indenyl))ZrX2 complexes via amine elimination
Diamond, Gary M.,Rodewald, Stephan,Jordan, Richard F.
, p. 5 - 7 (1995)
The amine elimination reaction of 1,2-bis(3-indenyl)ethane (3) and Zr(NMe2)4 (2) affords pure rac-(EBI)Zr(NMe2)2 (4; EBI = 1,2-ethylenebis(1-indenyl)) in 68% isolated yield. Treatment of 4 with 2 equiv of Me2-NH·HCl affords rac-(EBI)ZrCl2 (1) in 92% isolated yield. Compound 1 can also be prepared directly from 2 and 3 in a one-pot synthesis in 69% isolated yield.
Structurally characterized carboxylic acid modified zirconium alkoxides for the production of zirconium oxide thin films
Boyle, Timothy J.,Ottley, Leigh Anna M.,Rodriguez, Mark A.
, p. 1727 - 1738 (2005)
A series of carboxylic acid (H-ORc) modified zirconium alkoxides (Zr(OR)4) were synthesized through the reaction of the commercially available [Zr(μ-OPri)(OPri)3(H-OPr i)]2 (1, OPri = OCH(CH3) 2) with a series of sterically varied H-ORc, including: formic acid (H-O2CH or H-OFc), acetic acid (H-O2CCH3 or H-OAc), isobutyric acid (H-O2CCH(CH3)2 or H-OPc), trimethyl acetic acid (H-O2C(CH3)3 or H-OBc), and t-butyl acetic acid (H-O2CCH2C(CH 3)3 or H-ONc) which yielded the following products: Zr4(μ4-O)(μ-O)(μ-OFc)2(μ-OPr i)4(OPri)6 (2), Zr 3(μ3-O)(μ-OAc)3(OAc)2(μ- OPri)2(OPri)3 (3), [Zr 2(μ-OPc)2(μ-OPri)2(OPr i)4]2 (4), Zr2(μ-OBc)(μ- OPri)2(OPri)5(H-OPri) ? (H-OPri) (5), Zr2(μ-ONc)(ONc)(μ-OPr i)2(OPri)4(H-OPri) (6).To increase the structural variability of these precursors, we also investigated the H-ORc modifications of the novel Zr3(μ3-O) (μ3-ONep)(μ-ONep)3(ONep)6 (7) which was isolated from the reaction between Zr(NMe2)4 and 4 H-OCH2C(CH3)3 (H-ONep).The ORc-modified 7 species were isolated as: Zr3(μ3-O)(μ-OAc) 3(μ-ONep)2(ONep)5 (8), Zr 5(μ-O)3(μ-OPc)6(μ-ONep) 2(ONep)6 (9), [Zr(μ-OPc)(μ-ONep)(ONep) 2]2 (10), Zr5(μ-O)3(μ-ONc) 6(μ-ONep)2(ONep)6 ? (H-ONep) ? 1/2(C7H8) (11). Once fully characterized, these compounds were used to generate thin films of ZrO2 to investigate the optimal structural aspects that dictate thin film density. It was determined that the majority of these compounds did not yield high quality films; however, the non-condensed species (3-5) did produce clear and continuous ZrO2 films. From this very limited set of useful precursors, the larger nuclearity species (3) led to films of higher densification.
A method of manufacturing a zirconium compound
-
Paragraph 0062-0064, (2016/12/22)
PROBLEM TO BE SOLVED: To provide a method for producing an industrially suitable zirconium amide compound by which the zirconium amide compound can be produced in high yield and high selectivity by using a zirconium halide as a starting material. SOLUTION: The method for producing the zirconium amide compound includes mixing the zirconium halide with a dialkylamine, and reacting the mixture, cyclopentadiene which may have a substituent, and an alkyl alkali metal. COPYRIGHT: (C)2013,JPOandINPIT
ORGANOMETALLIC COMPOUND PREPARATION
-
Paragraph 0044; 0048; 0049, (2013/08/28)
A method of continuously manufacturing an organometallic compound is provided where two or more reactants are conveyed to a contacting zone of a reactor in a manner so as to maintain a laminar flow of the reactants; and causing the reactants to form the organometallic compound.