102739-73-1

Upstream product

• 110-91-8 morpholine 
• 17715-69-4 1-Bromo-2,4-dimethoxybenzene 
• 1708-29-8 2,5-dihydrofuran 
• 10272-07-8 3.5-dimethoxyaniline 
• 20469-65-2 1-bromo-3,5-dimethoxybenzene 
• 7051-16-3 1-chloro-3,5-dimethoxybenzene 
• 4179-19-5 1,3-dimethoxy-5-methylbenzene 
• 135678-66-9 3,5-dimethoxyphenyl 4-methylbenzene-1-sulfonate 
• 5765-65-1 4-(benzoyloxy)morpholine 
• 214360-69-7 4,4,5,5-tetramethyl-2-(2,4-dimethoxyphenyl)-1,3,2-dioxaborolane 
• 52189-63-6 3,5-dimethoxyfluorobenzene 

Downstream Products

• 767357-61-9 5-morpholin-4-yl-benzene-1,3-diol 

Relevant academic research and scientific papers

Robust Buchwald-Hartwig amination enabled by ball-milling

An operationally simple mechanochemical method for the Pd catalysed Buchwald-Hartwig amination of arylhalides with secondary amines has been developed using a Pd PEPPSI catalyst system. The system is demonstrated on 30 substrates and applied in the context of a target synthesis. Furthermore, the performance of the reaction under aerobic conditions has been probed under traditional solution and mechanochemical conditions, the observations are discussed herein.

Aerobic iron-catalyzed site-selective C(sp3)–C(sp3) bond cleavage in N-heterocycles

The kinetic and thermodynamic stability of C(sp3)–C(sp3) bonds makes the site-selective activation of these motifs a real synthetic challenge. In view of this, herein a site-selective method of C(sp3)–C(sp3) bon

Buchwald-Hartwig Amination of (Hetero)Aryl Tosylates Using a Well-Defined N-Heterocyclic Carbene/Palladium(II) Precatalyst

The cross-coupling of aryl tosylates with amines and anilines was achieved by using for the first time a Pd-NHC system based on the popular Pd-PEPPSI precatalyst platform in which the anchoring imidazol-2-ylidene ligand IPr (NMe2)2 incorporates two dimethylamino groups as backbone substituents enhancing both the electronic and steric properties of the carbene. The system optimization and its application scope are disclosed.

2,6-diisopropoxyphenyl(dicyclohexyl)phosphine: A new ligand for palladium-catalyzed amination reactions of aryl chlorides with potassium hydroxide as the base

A new, readily available monophosphine tetrafluoroborate salt [L2·HBF4] was developed for the palladium-catalyzed amination reaction of aryl chlorides in moderate to high yields with the cheap and easily available potassium hydroxide as the base. The reaction enjoys a wide scope, lower reaction temperatures, shorter reaction times, high yields, and low catalyst loading when compared to some of same amination reactions reported in the literature. Based on a kinetic study, 31P NMR measurements, and DFT calculations, a mechanism involving a 1:1 Pd/L species is proposed.

Facile catalytic SNAr reaction of nonactivated fluoroarenes with amines using η6-benzene ruthenium(II) complex

Catalytic SNAr reaction of fluoroarenes possessing no electron-withdrawing group(s) with cyclic amines was achieved using a readily accessible Ru catalyst, which was prepared from [Ru(benzene)Cl2] 2, AgOTf, and P(p-FC6H4)3. The coexistence of molecular sieves MS4A realized high conversion and various substituted aryl amines were obtained in good to high yields. Georg Thieme Verlag Stuttgart New York.

Troeger's base derived phosphanes for Suzuki-Miyaura and Buchwald-Hartwig cross-coupling reactions

A library of bis(phosphane) ligands based on the 2,8-substituted Troeger's base scaffold was synthesized through an efficient two-step protocol by starting from a commercially available aniline. The new ligands proved their efficiency in palladium-catalyzed Suzuki-Miyaura cross-coupling reactions and Buchwald-Hartwig aminations of aryl chlorides and bromides. Copyright

Palladium Complexes Based on Ylide-Functionalized Phosphines (YPhos): Broadly Applicable High-Performance Precatalysts for the Amination of Aryl Halides at Room Temperature

Palladium allyl, cinnamyl, and indenyl complexes with the ylide-substituted phosphines Cy3P+?C?(R)PCy2 (with R=Me (L1) or Ph (L2)) and Cy3P+?C?(Me)PtBu2 (L3) were prepared and applied as defined precatalysts in C?N coupling reactions. The complexes are highly active in the amination of 4-chlorotoluene with a series of different amines. Higher yields were observed with the precatalysts in comparison to the in situ generated catalysts. Changes in the ligand structures allowed for improved selectivities by shutting down β-hydride elimination or diarylation reactions. Particularly, the complexes based on L2 (joYPhos) revealed to be universal precatalysts for various amines and aryl halides. Full conversions to the desired products are reached mostly within 1 h reaction time at room temperature, thus making L2 to one of the most efficient ligands in C?N coupling reactions. The applicability of the catalysts was demonstrated for aryl chlorides, bromides and iodides together with primary and secondary aryl and alkyl amines, including gram-scale applications also with low catalyst loadings of down to 0.05 mol %. Kinetic studies further demonstrated the outstanding activity of the precatalysts with TOF over 10.000 h?1.

Aryl-Diadamantyl Phosphine Ligands in Palladium-Catalyzed Cross-Coupling Reactions: Synthesis, Structural Analysis, and Application

Synthesis, temperature-dependent NMR structure investigation and utilization of a new, stable and easily accessible aryl-diadamantylphosphine ligand family is reported. The bulky and electron-rich phosphorus center of the ligand enhances the catalytic activity of palladium in cross-coupling reactions of sterically demanding ortho-substituted aryl halides. In our study, we demonstrated the synthetic applicability of the new phosphine ligands in Buchwald-Hartwig and tosyl hydrazone coupling reactions.

Dialkylterphenyl Phosphine-Based Palladium Precatalysts for Efficient Aryl Amination of N-Nucleophiles

A series of 2-aminobiphenyl palladacycles supported by dialkylterphenyl phosphines, PR2Ar′ (R=Me, Et, iPr, Cyp (cyclopentyl), Ar′=ArDipp2, ArXyl2f, Dipp (2,6-C6H3-(2,6-C6H3-(CHMe2)2)2), Xyl=xylyl) have been prepared and structurally characterized. Neutral palladacycles were obtained with less bulky terphenyl phosphines (i.e., Me and Et substituents) whereas the largest phosphines provided cationic palladacycles in which the phosphines adopted a bidentate hemilabile k1-P,η1-Carene coordination mode. The influence of the ligand structure on the catalytic performance of these Pd precatalysts was evaluated in aryl amination reactions. Cationic complexes bearing the phosphines PiPr2ArXyl2 and PCyp2ArXyl2 were the most active of the series. These precatalysts have demonstrated a high versatility and efficiency in the coupling of a variety of nitrogen nucleophiles, including secondary amines, alkyl amines, anilines, and indoles, with electronically deactivated and ortho-substituted aryl chlorides at low catalyst loadings (0.25–0.75 mol % Pd) and without excess ligand.

METHODS FOR FORMING ARYL CARBON-NITROGEN BONDS USING LIGHT AND PHOTOREACTORS USEFUL FOR CONDUCTING SUCH REACTIONS

The disclosure relates to a method for forming aryl carbon-nitrogen bonds and to photoreactors useful in these and other light-driven reactions. The method comprises contacting an aryl halide with an amine in the presence of a Ni salt catalyst solution and an optional base, thereby forming a reaction mixture; exposing the reaction mixture to light under reaction condition sufficient to produce the aryl carbon-nitrogen bonds. In certain embodiments, the amine may be present in a molar excess to the aryl halide. In certain embodiments, the Ni salt catalyst solution includes a Ni(II) salt and a polar solvent, wherein the Ni(II) salt is dissolved in the polar solvent. In certain embodiments, the reactions conditions include holding the reaction mixture at between about room temperature and about 80° C. for between about 1 hour and about 20 hours such that at least about 50% yield is obtained.