1071-26-7 Usage
Uses
Used in Chemical Industry:
2,2-Dimethylheptane is used as a solvent for various chemical processes, leveraging its ability to dissolve a wide range of substances and facilitate reactions.
Used in Automotive Industry:
As a fuel additive, 2,2-Dimethylheptane is utilized to enhance the combustion properties of gasoline due to its high octane rating, thereby improving engine performance and reducing knocking.
Used in Rubber Production:
2,2-Dimethylheptane is employed in the manufacturing of rubber, where it contributes to the formation of specific rubber properties, such as flexibility and durability.
Used in Paints and Coatings Industry:
In the production of paints, coatings, and adhesives, 2,2-Dimethylheptane serves as a component that influences the drying time, adhesion, and overall performance of these products.
However, due to its flammability and potential health risks, 2,2-Dimethylheptane is classified as a hazardous chemical, necessitating careful handling and proper safety measures during its use.
Check Digit Verification of cas no
The CAS Registry Mumber 1071-26-7 includes 7 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 4 digits, 1,0,7 and 1 respectively; the second part has 2 digits, 2 and 6 respectively.
Calculate Digit Verification of CAS Registry Number 1071-26:
(6*1)+(5*0)+(4*7)+(3*1)+(2*2)+(1*6)=47
47 % 10 = 7
So 1071-26-7 is a valid CAS Registry Number.
InChI:InChI=1/C9H20/c1-5-6-7-8-9(2,3)4/h5-8H2,1-4H3
1071-26-7Relevant academic research and scientific papers
Copper nanoparticle-catalyzed cross-coupling of alkyl halides with Grignard reagents
Kim, Ju Hyun,Chung, Young Keun
, p. 11101 - 11103 (2013/11/19)
A cross-coupling reaction between alkyl bromides and chlorides and various Grignard reagents was carried out in the presence of commercially available copper or copper oxide nanoparticles as a catalyst and an alkyne additive. The catalytic system shows high activity, a broad scope, and good functional group tolerance.
Alkene oligomerization process
-
Page 4-5, (2008/06/13)
A process for oligomerising alkenes having from 3 to 6 carbon atoms which comprises contacting a feedstock comprising a) one or several alkenes having x carbon atoms, and, b) optionally, one or several alkenes having y carbon atoms, x and y being different, with a catalyst containing a zeolite of the MFS structure type, under conditions to obtain selectively oligomeric product containing predominant amounts of certain oligomers. The process is carried out at a temperature comprised between 125 and 175° C. when the feedstock contains only alkenes with 3 carbon atoms and between 140 and 240° C., preferably between 140 and 200° C. when the feedstock contains comprises at least one alkene with 4 or more carbon atoms.
