114530-49-3Relevant academic research and scientific papers
Activation of carboxylic acids by Burgess reagent: An efficient route to acyl ureas and amides
Wodka, Derek,Robbins, Michael,Lan, Ping,Martinez, Rogelio L.,Athanasopoulos, John,Makara, Gergely M.
, p. 1825 - 1828 (2006)
Carboxylic acids upon treatment with Burgess reagent are converted to novel mixed sulfocarboxy anhydrides. Subsequent treatment of such mixed anhydrides with amines at elevated temperatures yields acyl ureas and amides. The ratio of the two products appears to be temperature controlled. The method provides a simple and convenient route to diverse acyl ureas starting from carboxylic acids and amines.
Design and synthesis of mimics of the T7-loop of FtsZ
Sorto, Nohemy A.,Painter, Phillip P.,Fettinger, James C.,Tantillo, Dean J.,Shaw, Jared T.
, p. 2700 - 2703 (2013)
Mimics of the T7-loop of the bacterial cell division protein FtsZ have been designed and synthesized. The design is based on the X-ray cocrystal structure of P. aeruginosa FtsZ:SulA. Fast Rigid Exhaustive Docking (FRED) was employed to select compounds that can mimic the key interacting residues. Bicyclic oxazolidinones 1a-d were selected for further study and synthesized from a key bicyclic aziridine intermediate, which is synthesized from a readily available unsaturated aldehyde and amides derived from α-amino acids.
Efficient cleavage of carboxylic tert-butyl and 1-adamantyl esters, and N-Boc-amines using H2SO4 in CH2Cl2
Strazzolini, Paolo,Misuri, Nazareno,Polese, Pierluigi
, p. 2075 - 2078 (2005)
A new procedure for the deprotection of carboxylic tert-butyl and 1-adamantyl esters, and N-Boc-amines using H2SO4 in CH2Cl2 is described. The proposed method is simple, cheap, eco-friendly and represents a valid alternative to existing ones, with special significance in large scale applications.
Direct amidation of amino acid derivatives catalyzed by arylboronic acids: Applications in dipeptide synthesis
Liu, Shouxin,Yang, Yihua,Liu, Xinwei,Ferdousi, Farhana K.,Batsanov, Andrei S.,Whiting, Andrew
, p. 5692 - 5700 (2013)
The direct amidation of amino acid derivatives catalyzed by arylboronic acids has been examined. The reaction was generally slow relative to simple amine-carboxylic acid combinations though proceeded at 65-68 °C generally avoiding racemization. 3,4,5-Trifluorophenylboronic and o-nitrophenylboronic acids were found to be the best catalysts, though for slower dipeptide formations, high catalyst loadings were required and an interesting synergistic catalytic effect between two arylboronic acids was discovered. Arylboronic acids can be used to catalyze the direct amide formation of protected amino acid derivatives. For less reactive amino acids, cooperative catalysis can be used involving two arylboronic acids, one electron-rich and one electron-deficient, at high catalyst loadings to give good conversions at moderate temperatures. Copyright
Synthesis of amides and esters containing furan rings under microwave-assisted conditions
Janczewski, ?ukasz,Zieliński, Dariusz,Kolesińska, Beata
, p. 265 - 280 (2021/03/17)
In this work, we present a novel method for the synthesis of ester and amide derivatives containing furan rings (furfural derivatives) under mild synthetic conditions supported by microwave radiation. N-(Furan-2-ylmethyl)furan-2-carboxamide and furan-2-ylmethyl furan-2-carboxylate were produced using 2-furoic acid, furfurylamine, and furfuryl alcohol. The reactions were carried out in a microwave reactor in the presence of effective coupling reagents: DMT/NMM/TsO? or EDC. The reaction time, the solvent, and the amounts of the substrates were optimized. After crystallization or flash chromatography, the final compounds were isolated with good or very good yields. Our method allows for the synthesis of N-blocked amides using N-blocked amino acids (Boc, Cbz, Fmoc) and amine. As well as compounds with a monoamide and ester moiety, products with diamides and diester bonds (N,N-bis(furan-2-ylmethyl) furan-2,5-dicarboxamide, bis(furan-2-ylmethyl) furan-2,5dicarboxylate, and furan-3,4-diylbis(methylene) bis(furan-2-carboxylate)) were synthesized with moderate yields in the presence of DMT/NMM/TsO– or EDC, using 2,5-furan-dicarboxylic acid and 3,4-bis(hydroxymethyl)furan as substrates.
Cytotoxic activity of synthetic chiral amino acid derivatives
de Castro, Pedro P.,Siqueira, Raoni P.,Conforte, Luiza,Franco, Chris H.J.,Bressan, Gustavo C.,Amarante, Giovanni W.
, p. 193 - 200 (2019/12/28)
Cancer is a chronic degenerative disease considered one of the most important causes of death worldwide. In this context, a series of dual-protected amino acid derivatives was synthesized and evaluated as potential novel anticancer agents. The 40 derivatives were prepared in up to three reaction steps. The cytotoxic activities were screened in vitro against a panel of tumor and non-tumor cells using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Among the synthesized derivatives, three of them showed promising activity against cancer cells with half-maximal inhibitory concentration (IC50) ranging between 1.7-6.1 μM. The most promising derivative, bearing both a lipophilic N-alkyl diamine moiety and a protected amino acid scaffold showed a selectivity index of 3.4 towards tumor cells. The N-alkyl diamine moiety seems to play a crucial role in the enhancement of the anticancer activity. On the other hand, the incorporation of an amino acid scaffold resulted in increase in the selectivity towards cancer cell lines.
Graphene oxide: A convenient metal-free carbocatalyst for facilitating amidation of esters with amines
Patel, Khushbu P.,Gayakwad, Eknath M.,Shankarling, Ganapati S.
, p. 2661 - 2668 (2020/02/20)
Herein, we report a graphene oxide (GO) catalyzed condensation of non-activated esters and amines, that can enable diverse amides to be synthesized from abundant ethyl esters forming only volatile alcohol as a by-product. GO accelerates ester to amide conversion in the absence of any additives, unlike other catalysts. A wide range of ester and amine substrates are screened to yield the respective amides in good to excellent yields. The improved catalytic activity can be ascribed to the oxygenated functionalities present on the graphene oxide surface which forms H-bonding with the reactants accelerating the reaction. Improved yields and a wide range of functional group tolerance are some of the important features of the developed protocol.
Catalytic dehydrative peptide synthesis with gem-diboronic acids
Michigami, Kenichi,Sakaguchi, Tatsuhiko,Takemoto, Yoshiji
, p. 683 - 688 (2020/01/02)
Alkane-gem-diboronic acids have emerged as versatile organoboron catalysts for dehydrative amidation of α-Amino acids. A phenol-substituted multiboron catalyst with a B-C-B structure outperformed simple arylboronic acids in the condensation of α-Amino acids with suppressed epimerization of electrophiles. gem-diboronic acid catalysis were compatible with various O, N, and S-functionalized α-Amino acids bearing N-protecting groups including common carbamates used in peptide synthesis (Boc, Cbz, Fmoc). N-Trifluoroacetyl protection enabled an unprecedented catalytic dehydrative peptide synthesis at room temperature. Preliminary mechanistic studies revealed carboxylate-binding nature of gem-diboronic acids, orthogonal to the activation of carboxylic acids by arylboronic acids. The distinctive reactivity of the gem-diboronic acids would open prospects for mild catalytic peptide condensation.
Water-Tolerant and Atom Economical Amide Bond Formation by Metal-Substituted Polyoxometalate Catalysts
De Azambuja, Francisco,Parac-Vogt, Tatjana N.
, p. 10245 - 10252 (2019/11/03)
A simple, safe, and inexpensive amide bond formation directly from nonactivated carboxylic acids and free amines is presented in this work. Readily available Zr(IV)- and Hf(IV)-substituted polyoxometalates (POM) are shown to be catalysts for the amide bond formation reaction under mild conditions, low catalyst loading, and without the use of water scavengers, dry solvents, additives for facilitating the amine attack, or specialized experimental setups commonly employed to remove water. Detailed mechanistic investigations revealed the key role of POM scaffolds which act as inorganic ligands to protect Zr(IV) and Hf(IV) Lewis acidic metals against hydrolysis and preserve their catalytic activity in amide bond formation reactions. The catalysts are compatible with a range of functional groups and heterocycles useful for medicinal, agrochemical, and material chemists. The robustness of the Lewis acid-POM complexes is further supported by the catalyst reuse without loss of activity. This prolific combination of Zr(IV)/Hf(IV) and POMs inaugurates a powerful class of catalysts for the amide bond formation, which overcomes key limitations of previously established Zr(IV)/Hf(IV) salts and boron-based catalysts.
Facile direct synthesis of amides from trichloroethyl esters using catalytic DBU
La, Minh Thanh,Kim, Hee-Kwon
, p. 1135 - 1141 (2018/11/25)
A practical method for the direct synthesis of amide compounds is described. Using small quantities of DBU as a catalyst, the direct conversion of 2,2,2-trichloroethyl esters to their corresponding amides was readily achieved. Based on this protocol, various amide compounds were successfully synthesized in high yield, suggesting a promising approach for the practical one-pot aminolysis from 2,2,2-trichloroethyl protected esters.
