Welcome to LookChem.com Sign In|Join Free

CAS

  • or

12014-85-6

Post Buying Request

12014-85-6 Suppliers

Recommended suppliersmore

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

12014-85-6 Usage

Uses

Cerium silicide is used as a surrogate material to investigate the feasibility of high-energy ball milling and Spark Plasma Sintering (SPS) for the production of uranium silicide.

Check Digit Verification of cas no

The CAS Registry Mumber 12014-85-6 includes 8 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 5 digits, 1,2,0,1 and 4 respectively; the second part has 2 digits, 8 and 5 respectively.
Calculate Digit Verification of CAS Registry Number 12014-85:
(7*1)+(6*2)+(5*0)+(4*1)+(3*4)+(2*8)+(1*5)=56
56 % 10 = 6
So 12014-85-6 is a valid CAS Registry Number.
InChI:InChI=1/Ce.Si2/c;1-2/rCeSi2/c1-2-3-1

12014-85-6 Well-known Company Product Price

  • Brand
  • (Code)Product description
  • CAS number
  • Packaging
  • Price
  • Detail
  • Alfa Aesar

  • (35836)  Cerium silicide, 99.9% (REO)   

  • 12014-85-6

  • 5g

  • 798.0CNY

  • Detail
  • Alfa Aesar

  • (35836)  Cerium silicide, 99.9% (REO)   

  • 12014-85-6

  • 25g

  • 2831.0CNY

  • Detail

12014-85-6SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 20, 2017

Revision Date: Aug 20, 2017

1.Identification

1.1 GHS Product identifier

Product name bis(λ<sup>2</sup>-silanylidene)cerium

1.2 Other means of identification

Product number -
Other names Cerium silicide

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:12014-85-6 SDS

12014-85-6Downstream Products

12014-85-6Relevant articles and documents

Thermal, electrical and magnetic properties of the ferromagnetic dense Kondo system CeSix

Sato, Nobuya,Mori, Hiroshi,Satoh, Takeo,Miura, Tsuneo,Takei, Humihiko

, p. 1384 - 1394 (1988)

Single crystals of the ferromagnetic dense Kondo system CeSix were grown, and the specific heat, the electrical resistivity and the magnetic susceptibility were measured. Electrical resistivity measurements clearly show the typical Kondo behavior, which unambiguously tells that CeSix is a ferromagnetic dense Kondo system. The appreciable anisotropy of the magnetic susceptibility is analyzed with the crystalline field effect and a conjecture is made that the ground doublet is a Γ7-like doublet.

Interaction of the components in the systems Ce-Ag-Si at 500 °c and Eu-Ag-Si at 400 °c

Belan,Bodak,Gladyshevskii,Soroka,Kuzhel,Protsyk,Stets

, p. 212 - 216 (2005)

Isothermal sections of the phase diagrams of the systems Ce-Ag-Si and Eu-Ag-Si were built at 500 and 400 °C, respectively. Three intermetallic compounds were found in the former system, two in the latter and their crystal structures and homogeneity region

Thermoelectric properties of the solid solutions based on ThSi2-type CeSi2 compound

Morozkin,Stupnikov,Nikiforov,Imaoka, Nobuyoshi,Morimoto, Isao

, p. 12 - 15 (2006)

Thermoelectric properties (from 240 up to 380 K) of the ThSi2-type CeSi2, Ce40Si27Ge32, Ce38Si48Ge13, Ce37Si28Ga35 and Y0.5

ELECTRONICALLY-DRIVEN VOLUME TRANSITION IN CeSi2 - xGax.

Mori,Sato,Satoh

, p. 955 - 958 (1984)

The pseudobinary compounds CeSi//2// minus //xGa//x were prepared, and the lattice parameters and the susceptibilities were measured. At the Si-rich end, 0 less than equivalent to x less than 0. 2, the system behaves as one with a high (approx. 200K) Kondo temperature exhibiting no magnetic order. For 0. 5 less than x less than equivalent to 1. 3, the system shows the unit-cell volume 3% larger and orders ferromagnetically around 10K. The alpha -ThSi//2 structure is retained up to x equals 1. 3, but one observes a two-phase region for 0. 2 less than equivalent to x less than equivalent to 0. 5, consisting of small- and large-volume phases.

Kohori, Y.,Asayama, K.,Kohara, T.,Sato, N.,Yashima, H.,et al.

, p. 349 - 352 (1985)

Wuilloud, E.,Delley, B.,Schneider, W.-D.,Baer, Y.

, p. 197 - 199 (1985)

MAGNETIC PROPERTIES OF RARE EARTH DISILICIDES RSi//2.

Pierre, J.,Siaud, E.,Frachon, D.

, p. 321 - 330 (1988)

The magnetic properties of the rare earth disilicides (RSi//2) have been re-investigated. We confirm the occurrence of ferromagnetism in PrSi//2 and antiferromagnetism in GdSi//2, TbSi//2 and HoSi//2. NdSi//2 orders at T//N equals 10 K and ErSi//2 orders

Auger effect in high-resolution Ce 3d-edge resonant photoemission

Cho, E.-J.,Jung, R.-J.,Choi, B. H.,Oh, S.-J.,Iwasaki, T.,et al.

, p. 1 - 6 (2008/10/08)

The bulk-sensitive Ce 4f spectral weights of various Ce compounds including CeFe2, CeNi2, and CeSi2 were obtained with the resonant photoemission technique at the Ce 3d edge. We found that the line shapes change significantly with the small change of the incident photon energy. Detailed analysis showed that this phenomenon results primarily from the Auger transition between different multiplet states of the Ce 3d5/24f2 (bar denotes a hole) electronic configuration in the intermediate state of the resonant process. This tells us that extra care should be taken for the choice of the resonant photon energy when extracting Ce 4f spectral weights from the Ce 3d-edge resonant photoemission spectra. The absorption energy corresponding to the lowest multiplet structure of the Ce 3d5/24f2 configuration seems to be the logical choice to obtain genuine Ce 4f spectral weight from the Ce 3d resonant photoemission data.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 12014-85-6